MaxLux МХ0101 User manual

 
maxluxitalia.com | [phone] � U
  
MX 0101
INTRODUCTION
FEATURES
La matrice MX0101 8x8 DVI-D è un dispositivo che permette a ciascun segnale DVI-D presente su uno degli otto ingressi di
essere commutato e visualizzato su una delle otto destinazioni DVI-D.
La matrice supporta risoluzioni PC ed HDTV fino a WUXGA e 1080p
con banda di 2,25 Gbps, profondità colore 12 bit e 3D.
Il coma ndo della matrice è effettuato dal pannello integrato, via telecomando infrarossi o via porta seriale RS232.
•HDMI, HDCP 1.1 and DVI compliant
•Supports HDMI 3D feature (with HDMI to DVI adaptor cable)
• Supports resolutions to VGA ~ WUXGA and 480i~1080p dependent
upon the output display's EDID settings
• Supports stereo audio input and output via 3.5mm mini-jack cable
• Supports 3D signal dependent upon the output display's EDID
settings
•Supports IR extension
• Supports RS-232, remote control, on-panel control and IP Control
(Telnet & Web GUI)
•2U size design
8x8 DVI Matrix

 
 |   
  
MX 0101
OPERATION CONTROLS AND FUNCTIONS
Front Panel
POWER LOCK
MENU OUT
A1B2C3D4
IN
E5F6G7H8
8X8 DVI MATRIX CMSI-8D8DSA
2 3 4 5 61
1LCM: Displays the setting information of each input and output
setting.
2POWER: Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
3LOCK: Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate green when locked.
4IR: IR Receiver window (accepts the remote control signal of this
device only).
5MENU: Press this button once to select EDID setting from STD
(internal) 1 or TV (external) 2 then press it again to conrm the
selection. Press this button every to conrm the selection.
Note: For the 'TV' EDID setting, the unit will read and store the
EDID information of the display connected to HDMI output A. For
the 'STD' EDID setting the unit's built-in EDID setting will be used
(1080p@60/12-bit for video and LPCM 2CH for audio).
61~8/A~H and IN/OUT: Press the OUT or IN button to select the
output or input mode and then press the required number button
to make the selection accordingly.
For example, if outputs A~D need to be set to input 1 and outputs
E~H need to be set to input 2, then the following sequence of
button presses need to be performed:
Press: OUTABCDIN1MENU,
and then press: OUTEFGHIN2MENU.
Note: If the MENU button is not pressed the selection will not be
changed.

 
maxluxitalia.com | [phone] �  U 
  
MX 0101
Rear Panel
IR-IN
RS-232 SERVICE
AUDIO OUT
AUDIO IN
AB
12
DC FE HG
33334 8
A
1121111
BCD
DVI IN
DVI OUT FE G
DC 24V
1
23
4
V+
GND
GND GND
V+
CONTROL
2 3 54 6 71
1CONTROL: This port is the link for Telnet and Web GUI controls,
connect to an active Ethernet link with an RJ45 terminated cable (for
further details, please refer to section 6.7 & 6.8).
2RS-232: Connect to a PC or control system with D-Sub 9-pin cable
for the transmission of RS-232 commands.
3IR-IN: Connect to the supplied IR extenders for IR signal reception
from the remote control of the Matrix. Ensure that the remote is
within the direct line-of-sight of the IR extender when used.
4SERVICE: Manufacturer use only.
5DVI IN 1~8 with Audio: Connect to DVI sources such as PC/Laptop
or DVD/Blu-ray player with HDMI to DVI adaptor cables. Connect
the audio input to the source with 3.5mm mini-jack cables
6DVI OUT A~H with Audio: Connect to a DVI equipped TV/monitor
for display of the DVI input source signal. Connect the audio
outputs to AV receivers or active speakers with 3.5mm mini-jack
cables
7DC 24V: Plug the supplied 24 V DC power supply into the unit and
connect the adaptor to an AC outlet.

SPECIFICATIONS
Video Bandwidth
Input Ports
Output Ports
ESD Protection
Power Supply
Dimensions
Weight
Chassis Material
Silkscreen Color
Operating Temperature
Storage Temperature
Relative Humidity
Power Consumption
225MHz/6.75 Gbps
8×DVI, 8×3.5mm Mini-jack, 1×IR, 1×RS-
232, 1×mini USB Type B (For rmware
update only), 1×RJ-45 (CONTROL)
8×DVI , 8×3.5mm Mini-jack
Human-body Model:
±8kV (air-gap discharge)
±4kV (contact discharge)
24V/6.25A DC (US/EU standards, CE/
FCC/UL certied)
438 mm (W)×255 mm (D)×93 mm (H)
4648g
Metal
Black
0 ˚C~40 ˚C/32 ˚F~104 ˚F
−20 ˚C~60 ˚C/−4 ˚F~140 ˚F
20~90 % RH (non-condensing)
51W
CONNECTION DIAGRAM
IR-IN
RS-232 SERVICE
AUDIO OUT
AUDIO IN
AB
12
DC EF HG
86543 7
A
4561 32 7
CB D
DVI IN
DVI OUT EFG
DC 24V
1
23
4
V+
GND
GNDGND
V+
CONTROL
H
8
1A
B
2
3
4D
5E
6F
7G
CR-110
IN OUT
C
Monitor
Monitor Monitor
Amplier Amplier Amplier
Active
Speakers Active Speakers Active Speakers Active Speakers
Monitor
PCLaptop
Laptop
Laptop
Laptop
PC
Monitor
PC PC
Monitor Monitor Monitor
Audio Cable DVI Cable
Power Supply
RS-232
Equipped
PC or
Laptop
Smartphone
or Tablet
Network
Router
IR In
8×8 DVI Matrix
with Audio