MaxRange Value User manual

LIGHT BEAM ANTENNA
MaxRange Antenna Series
Assembly Instructions
MaxRange Value
Digital / High Definition
Television Antennas
Assembly Instructions
1
MaxRange Value Antenna

These instructions will lead you through the simple steps needed to
assemble your new antenna. Follow each step to ensure that the
antenna is assembled correctly.
Assemble the antenna on a table or other safe location having
adequate lighting. Work safely, use tools properly and wear eye
protection.
Your antenna is delivered in one box. Inspect the box for damage and notify the
shipping company if damage is visible.
Tools you will need are:
•Pliers
•A Philips Screw Driver
•A 3/8” Nut Wrench
•A 3/16” Hex Wrench
Assembly Instructions
2
MaxRange Value Antenna
Philips
Screw Driver
3/8” Nut
Wrench
3/16” Hex
Wrench
Pliers

MaxRange Value Antenna Assembly
Open the box and remove the antenna component bundle. Inspect for damage.
Carefully remove the plastic wrap and inspect the antenna components.
Assembly Instructions
3
MaxRange Value Antenna
Antenna
Element
Mast
Stub
Antenna Element
with Coupling

Select the Antenna Element and remove the 10-24x 1/2” screw and star washer.
Select the Antenna Element with Coupling and carefully remove the Elastic Band.
Assembly Instructions
4
MaxRange Value Antenna
10-24
Screw
Star
Washer
Antenna
Element
with
Coupling
Elastic
Band

Carefully slide the Antenna Element onto the Coupling as shown, under the Terminal
Strip. Align the screw hole of the Antenna Element Hub with the hole in the Coupling
Tube and then insert the 10-24x 1/2” Screw as shown through the Terminal Strip,
and Star Washer. Tighten firmly the 10-24x 1/2” Screw into the Antenna Element
Hub.
Using a Phillips Screwdriver, loosen and remove the 10-24x1-1/2” screw and 10-24
anti-vibration hex-nut from the Mast Stub.
Assembly Instructions
5
MaxRange Value Antenna
Antenna
Element
with
Coupling
Terminal
Strip
10-24
Screw
Star
Washer
Antenna
Element
Hub
Coupling
Tube
Antenna
Element
10-24x1-1/2” screw
10-24 anti-vibration
hex-nut

Using a 3/16” Hex Wrench, slightly loosen the hex-head screw in the Antenna
Element Coupling.
Insert the Mast Stub into the Antenna Element Coupling and align the holes in the
Coupling with the holes in the Mast Stub.
Insert the 10-24x1-1/2” screw through the Coupling and Mast Stub. Firmly tighten
the 10-24 anti-vibration hex nut.
Firmly tighten the hex-head screw in the Antenna Element Coupling. !
Assembly Instructions
6
MaxRange Value Antenna

Congratulations, you have completed the assembly of your
MaxRange Value Antenna.
Assembly Instructions
7
MaxRange Value Antenna