MAXSTAR Mini Chef User manual

MINI CHOPPER
MINI CHEF
MAXSTAR APPLIANCE LIMITED
1/7, West Patel Nagar, Opposite Pillar No. - 205, New Delhi - 110008
Tel: [phone]; e-mail: [e-mail]; Website: www.maxstar.in
USER MANUAL
Please read this book carefully before using this appliance.

AT A GLANCE
Parts
1. Motor unit
2. Button
3. Bowl driver shaft
4. Bowl
5. Chopping blade
6. Lid
Assembling
IMPORTANT SAFEGRAUDS
1. Carefully read all instruction before using.
2. Keep hands and utensils away from moving blades or discs while processing food
to reduce the risk of severe injury to persons or damage to the food processor. A
scraper may be used but must be used only when the food processor is not
running.
3. Blades are sharp. Handle carefully.
4. To reduce the risk of injury, never place cutting blade or discs on base without
first putting bowl properly in place.
5. Be certain cover is securely locked in place before operating appliance.
6. Never feed food by hand. Always use food pusher.
7. Do not attempt to defeat the cover interlock mechanism.
8. Do not touch surface that may be hot. Use handles or knobs provided.
9. To protect against electrical shock do not immerse cord, plugs, portable
appliances (or other specific part or parts) in water or other liquid.
10. Close supervision is necessary when any appliance is used by or near children.
11. Portable-Remove plug from outlet when the appliance is not in use, before putting
on or taking off parts, and before cleaning. Allow to cool before handing.
Permanently installed – Make sure appliance is OFF when not in use, before
putting on or taking off parts, and before cleaning.
12. Portable Do not operate any appliance with a damaged cord or after the appliance
malfunctions or is dropped or damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair, or electrical or
mechanical adjustment.
13. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
14. Do not use outdoors (this item may be omitted if the product is specifically
intended for outdoor use).
15. Do not let cord hang over edge of table or counter or touch hot surfaces.
16. Do not place on or near a hot gas or electric burner or in a heated oven.
17. Extreme caution must be used when moving an appliance containing hot oil or
other hot liquids.
18. Where applicable, always attach plug to appliance and check that the control is
OFF before plugging cord into wall outlet. To disconnect, turn the control to OFF,
then remove plug from wall outlet.
19. Do not use appliance for other than intended use.
20. Avoid contacting moving parts.
21. Never attempt to take food or liquid out from the bowl when the blade is moving.
Always wait until the motor stops completely.
22. Do not overload the appliance with food.
23. The appliance operates fast and effective.
Do not operate the machine without loading more than 5 seconds.
Do not operate continuously for more than 20 seconds.
24. Never place hot ingredients into processor ( 70c).
25. The marked power is just for chopping meat.

SAVE THESE INSTRUCTIONS
FOOD PROCESSOR ASSEMBLING
1. Before the first using, wash all removable parts in warm soapy water, rinse
thoroughly and dry. Wipe the housing with a damp cloth.
2. Never immerse motor body in any liquid or wash under running water.
3. Place the motor unit on a level surface.
4. Align the rib under the bowl with the corresponding slot on the motor unit. Turn
gently until it locks in position.
ATTACHMENTS
CUTTING KNIFE
1. Fit the cutting knife on the drive spindle.
2. Load products to be processed inthe bowl.
3. Place lid on the bowl and rotate it to lock..
SUPPORTING DISC (GRATING/SLICING)
1. Place the shooting disc on the drive spindle.
2. Fit the reversible grating/ slicing disc over the shooting disc with desired cutting blade facing
upward.
NOTE: You must complete assembling fully; otherwise you cannot switch on device.
CAUTION: Depend on the majority of foodstuffs, it is advisable to activate the Pulse button
momentarily a few time s in succession and then to continue operating until the required degree of
fineness has been achieved.
Caution: Don’t use this product to chop flour.
Do not remove any parts during the operation.
SOME PRODUCTS PROCESSING
USING THE CUTTING KNIFE
To avoid blades damage do not process hard items such as frozen foods, ice, cereals, rice, spices
and coffee.
Type of food Preparation Max
amount at
on time
Time
approximate
Meat Remove skin and sinew, cut into 1.5cm
pieces, fill with 80ml water or other
liquid spice
150g 20sec.
Fish Remove bones and skin, cut into 2cm
cubes
100g 10-20sec.
Onions Peel and cut into 2-3cm pieces 70g 7 short bursts
Garlic Peel 3 cloves 5sec.
Apple (raw) Peel, remove cores and cut into 2cm
pieces
100g 10-15sec.
Carrots
Peel and cut into 2cm pieces
140g
20sec.
Cabbage
Remove the core and cut into 2cm
pieces
70g
5sec.
Tomatoes Cut eachinto 4-6 pieces 70g 10-15sec.
Mushroom Quarter for best results. 1/2cup 10-15sec.
When processing is finished, switch off, and then unplug the appliance and wait the motor will
stop before removing a food and attachments.
CLEANING AND CARE
1. Switch off and unplug the appliance.
2. Wash the accessories immediately and avoid soaking them in water for long periods; wash in
warm sudsy water after each use. Dry all accessories with a clean cloth. Do not use a dish
washing machine.
3. Wipe housing with a damp cloth.
4. Do not use scouring pads, abrasive and harsh detergents.
5. Do not immerse the motor unit in any liquid or in a dishwasher.
CAUTION: The blades are extremely sharp and therefore dangerous. Handle with caution!
STORAGE
Be sure that the appliance is unplugged.
Compete all requirements of Chapter CLEANING AND CARE.
Keepthe appliance in a dry clean place.

MINI CHOPPER
RATING : 220-240V,50 HZ
POWER : 250W
MINI CHEF
WARRANTY CARD

Please preserve the Warranty Card and Cash Memo and ensure that they are duly stamped and signed by the Company’s dealer.
The Warranty Card or a Cash Memo which is not stamped and signed by the dealer will be treated as invalid.
Max Star product that you have bought is of excellent quality and construction. However we \will correct, free of charge any defects in
material or workmanship for a period of one year* (the Warranty period) from date of purchase subject to the terms and conditions.
TERMS & CONDITIONS OF WARRANTY
1. Max Star products are warrantied solely against poor workmanship, manufacturing defect and use of faulty material only.
Consequential liabilities will not be entertained. All Max Star products are designed for domestic usage only.
2. In the event of a replacement of spares during the warranty period, this warranty card will be required along with the original tax
invoice/ Cash Memo to process the claim. The Company will not entertain a claim with incomplete warranty details.
3. This warranty is confined to the first purchaser of the product only & is not transferable.
4. Repair or replacement of spares will be carried out through the Company’s Authorized Service Centre or its Authorized Dealers.
5. Repairs during warranty period shall be carried on “Carry In” basis, wherein, for services, the purchaser shall bring the product to the
Company’s Authorized Service Center / Authorized Dealer for warranty service along with Tax Invoice / Cash Memo and Warranty
Card. The warranty does not cover cost of transportation of product from the customer’s place to the Company’s Authorized Service
Centre/ Authorized dealer. However, in case the customer located beyond the municipal limits of the jurisdiction of the Company’s
Authorized Service / Authorized Dealers, wishes the Company / its Authorized Service Center/ Authorized Dealer to collect the
product from his place for the purpose of servicing the product then all expenses incurred in collection and delivery back of the
product, as well as the expenses incurred in connection with deputing of service personnel / technicians towards to and for travel,
conveyance and other incidentals etc. will be borne by the customer.
6. In the event of repairs / replacement of any part/s of the product, this warranty will be thereafter continue and remain in force only for
the unexpired period of the warranty. Moreover, the time taken for repair/ replacement and in transit whether under the warranty or
otherwise shall not be excluded from the warranty period. The customer shall have to pay a visit charge towards inspection, as
applicable.
7. The Company / its Authorized Service Centre/ Authorized Dealer, reserves the right to retain any parts or component/s replaced at
its/their discretion in the event of a defect noticed in the equipment during the warranty period. The company shall have exclusive
right to replace the defective / unserviceable part/s or component/s with the part/s or component/s which may be new or refurbished.
8. The warranty does not cover accessories external to the product.
9. The warranty does not cover demonstration/installation of the product purchased.
10. In the event of any unforeseen circumstance, and spares not being available, the Company’s prevailing depreciation rules will be
binding onthe purchaser to accept as a commercial solution in lieu of repairs.
11. The warranty is issued at Delhi and Courts at Delhi shall have exclusive jurisdiction over matters covered or flowing from this
warranty.
12. The Company’s obligation under this warranty shall be limited to repairing or providing replacement of parts, which are found to be
defective.
13. In the event of repairs/replacement of specific parts on which warranty is more is more than product warranty, the specific parts will
be repaired /replaced free of the cost but customer needs to pay service charges in such cases.
THIS WARRANTY IS NOT APPLICABLE IN ANY OF THE FOLLOWING CASES:
1. The warranty card is not duly filled by the selling dealer.
2. The completed warranty card is not presented to the service personnel at the time of repair.
3. The product is not purchased from an Authorized MAX STAR dealer.
4. The product is not installed, used and maintained according to instruction given in the instruction manual.
5. Defect cause by improper use as determined by the company personnel.
6. Installation/ repair work is carried out by persons/agency other than Authorized by the company.
7. Defects have been caused by reasons beyond control of the Company, like act of God, during transit to Service Centre or
purchaser’s residence, poor maintenance, damage to the product caused by insects/ rodents.
8. The warranty does not apply to :
a. Surface coating, body aesthetics, plastic parts, neon lamps, bake light part, rubber/neon parts, cord wire, push button & bulb and
dursable parts viz. shaft, bush etc.
b. Normal wear and tears of parts.
c. Damages resulting from accidents, mishandling, improper use or negligence on the part of customer and fluctuation in supply
voltage.
d. Damages resulting due to usage of power supply other than specified 230 Volts AC 50 Hz. e.g. inverters, generator etc.
e. For humming noise generated due to usage of electronic fan regulators of any make.
f. Breakage of glass parts.
g. Heating tubes/rods for failure or breakage.
MAXSTAR APPLIANCE LIMITED
1/7, West Patel Nagar, Opposite Pillar No. - 205, New Delhi - 110008
Tel: [phone]; e-mail: [e-mail]; Website: www.maxstar.in
WA R R A NT Y
(As per terms and conditions overleaf)
Name of Purchaser : Address : Phone No. Residence : Office :
Product Sl. No.: Date Of Purchase :
Customer’s Signature Dealer’s Stamp & Signature