After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
8
Bluetooth®
Pairing
Make sure your device has Bluetooth® active and the headphones
are turned off. Press and hold the function button for 6 seconds until
the LED is ashing red and white. Once the headphones are in
pairing mode, search on your device for “MAXTEK AUDIO” and
select from the list to pair. In most case the pairing will be done
automatically, but you may need to enter the code ‘0000’.
If the pairing is successful the red LED will constantly slow ash.
Also a beep will be heard.
Pairing A Second Device
After you have successfully paired one device you can pair another
to the headphones. To do this turn off the Bluetooth®function of the
original device and turn off the headphones.
Press and hold the function button for 6 seconds until the LED is
ashing red and white. Once the headphones are in pairing mode,
search on your device for “MAXTEK AUDIO” and select from the list
to pair. In most cases the pairing will be done automatically, but you
may need to enter the code ‘0000’.
If the pairing is successful the red LED will constantly slow ash.
Also a beep will be heard.
Please note:
A pairable device is either a smart phone, laptop, MP3 player, PC etc, not
another pair of headphones or a similar receiving peripheral device.
These headphones will not connect to a Bluetooth® TV or Hi-Fi System unless
specied by the devices manufacturer.
