MAXWORKS 80695 User manual

Read and understand this entire manual before assembling,
installing, operating, or servicing this product.
SAVE THIS MANUAL
Copyrightc2017 by MAXWORKS. All rights reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the express written consent of MAXWORKS.
Due to continuing improvements, actual product may di󰀨er slightly from the product described herein.
Tools required for assembly and maintenance may not be included.
Instruction Manual
&
Parts List
15 Bin Table Top
Storage Bin Rack
Model 80695

IMPORTANT SAFETY
INFORMATION
This is a SAFETY ALERT symbol.
It is used to alert you to
potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible injury or death.
DANGER indicates a
hazardous situation which, if not avoided,
will result in death or injury.
WARNING indicates a
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a
hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE indicates
important information which, if not followed,
may cause damage to equipment.
SAVE THIS MANUAL
Keep this manual for the safety warnings
and precautions. The manual o󰀨ers impor-
tant information on how to assemble, use
and maintain this product.
Write the product’s model number and
purchase date on the cover page of this
manual.
Keep this manual (and your purchase re-
ceipt) in a safe place.
UNPACKING
The shipment should be thoroughly inspected as
soon as it is received. The signed “bill of lad-
ing” is acknowledgement by the carrier of receipt
in good condition or shipment covered by our
invoice. For your own protection, if any of the
goods called for on the bill of lading are shorted
or damaged, do not accept them until the carrier
makes a notation on the freight bill of the shorted
or damaged goods.
Notify MAXWORKS immediately if any hidden
loss or damage is discovered after receipt.
DANGER
WARNING
CAUTION
NOTICE
INSTRUCTION
MANUAL
WARNING concerning Risk of Eye
Injury. Wear ANSI approved eye
protection.
WARNING concerning Risk of
Hearing Loss. Wear hearing pro-
tection.
Denition of Symbols
IMPORTANT SAFETY
INSTRUCTIONS
1. Read and understand all
safety warnings and in-
structions. Failure to follow the warnings
and instructions may result in serious injury
or death. Save all warnings and instructions
for future reference.
2. Personal and Work Area Safety
A. Always wear ANSI approved
safety goggles.
B. Always wear hearing protec-
tection when working in
noisy environments. Prolonged exposure
to high intensity noise can cause hearing
loss.
C. Use safety equipment. Safe-
ty shoes, hard hat and work
gloves must be used for applicable condi-
tions.
Model 80695 Page 2
D. Dress appropriately. Never wear loose
tting clothing or jewelry when working.
Contain long hair, and keep hair, clothing
and gloves away from moving parts.
E. Use common sense when working.
Stay alert and concentrate when assembling
and using the Storage Bin Rack. Never
work while under the inuence of alcohol,
drugs or medications.

Model 80695 Page 3
Personal and Work Area Safety (continued)
F. While assembling the Storage Bin
Rack keep work area clean and well light-
ed. Keep spectators and children out of
the work area.
3. Use of the Storage Bin Rack
A. Do not modify this product and do not
use this product for purposes that it was not
designed for.
B. This product is designed to be a storage
organizer of small hardware components.
The individual Bins each have a maxi-
mum weight capacity of 2 Lbs. Do not
overload the bins.
C. The Storage Bin Rack must be placed on
a solid surface that is capable of supporting
the weight of the Rack, all 30 Bins and their
contents.
D. This product is
not a toy and should be located in an area
away from children and out of reach of
children. Small hardware components such
as screws, bolts and nuts can be accidently
swallowed by children at play.
E. This product must be fully assembled. If
you are not experienced or capable of doing
this type of assembly work safely, the Stor-
age Bin Rack should be set up by a qualied
service technician.
F. Save packaging information, warnings
and this manual. They contain important in-
formation and must always remain readable.
Contact MAXWORKS for replacements.
Keep in mind that the warnings previous-
ly discussed cannot cover all possible
conditions or situations that could occur.
It is important that the person setting up
and using this product understand that
common sense and caution are factors
which cannot be built into this product,
and must be supplied by the person(s)
using this product.
Limited Warranty
MAXWORKS warrants to the original retail
purchaser that the product is free of defects
in material and workmanship at the time of
shipment. This Storage Bin Rack is warran-
teed for 90 days from the date of purchase.
This warranty is expressly in lieu of all other
warranties, express or implied.
Proof of purchase is required for warranty
transactions; a copy of the original invoice
or sales receipt is required.
SPECIFICATIONS
Maximum Weight
Capacity
Each Bin = 2 Lbs.
Construction Bins: Durable Polypro-
pylene
Stand: Powder Coated
Steel
WARNING

Assembling and Using the
Storage Bin Rack
Always wear ANSI approved
safety goggles.
Refer to the photo to the right and the As-
sembly Diagram on page 5.
A. Read all Personal and Work Area Safety
Warnings on pages 2 and 3 before setting up
and using this product.
B. Attach the Bottom Feet (8) to the Frame
Legs (2) using longer Bolts (6) and Nuts (7).
Make sure the Frame Legs t inside the “L”
bracket on top of the Bottom Feet.
C. Attach the 3 Center Support Brackets (5)
to the Frame Legs (2) and press down to
lock into place. Note: Orient each Center
Support Bracket so that the screw hole in the
center is closest to the lower lip of the Cen-
ter Support Bracket.
D. Attach Upright Support (4) to the back of
the Center Support Brackets (5) using short-
er Bolts (3).
E. Make sure the Rack asssembly sits level
and tighten all hardware.
F. Hang the Bins (1) on the Rack assembly.
G. Loading the Bins: The individual Bins
each have a weight capacity of 2 Lbs.
Do not overload the bins.
Maintaining the Storage Bin Rack
A. The general condition of this product
should be checked periodically. Make sure
that all hardware is tightened. Make sure
that the Bins are in good condition, with no
cracks or other damage.
B. Keep the product clean and free of
grease. Model 80695 Page 4
Note: Some parts are listed and shown for illustration pur-
poses only, and are not available as replacement parts.
Manufactured for and distributed by:
Maxx Group, LLC, Oxnard, CA 93030 USA
www.maxworks.com
Bottom Feet (8)
Frame
Leg
(2)
Upright Support (4)
“L” Bracket

Assembly Diagram
PARTS LIST
No. Description Qty.
1
Bottom Feet 2
2 "L-Bar "Frame Legs 2
3
Center Support Brackets
3
4 Upright Support 1
5
M4x10 Bolts
3
6 M6x15 Bolts 8
7 M6 Nuts 8
8
Bins
15
1
2
4
5
67
8
3
Model 80695 Page 5