Mayer AKRO-MILS TiltView HD4824TV User manual

Parts:
FOR MODEL HD4824A ONLY:
FOR ALL MODELS:
B x 4
E x 20
A x 2
C x 4
D x 10
Parts:
FOR MODEL HD4824A ONLY:
FOR ALL MODELS:
B x 4
E x 20
A x 2
C x 4
D x 10
Assembly Instructions
TiltView™Cabinet
Model No. HD4824TV
1
06702
A x 4
TVCLIP
E x 24
06704
B x 4
06705
C x 4
06706
D x 4
2
1Stack four 06702 TiltViews (A) on the floor of the cabinet.
R010597
F x 2
5/16-18 x 3/4"
G x 4
2Install Handles (A) using 5/16-18 Carriage Bolts and Flange Nuts (B).
If building model HD4824A continue to Step 3. For all other models assembly is complete.
PARTS:
PARTES:
PIÈCES:
Instrucciones de ensamblaje
Armario TiltView
Modelo HD4824TV
Instructions d’assemblage
Armoire TiltView
Modèle HD4824TV
2-BIN TILTVIEW
TILTVIEW CON DOS RECIPIENTES
TILTVIEW 2 BACS 6-BIN TILTVIEW
TILTVIEW CON SEIS RECIPIENTES
TILTVIEW 6 BACS
4-BIN TILTVIEW
TILTVIEW CON CUATRO RECIPIENTES
TILTVIEW 4 BACS TILTVIEW HANGING CLIP
SUJETADORES COLGANTES TILTVIEW
ATTACHE DE SUSPENSION TILTVIEW
5-BIN TILTVIEW
TILTVIEW CON CINCO RECIPIENTES
TILTVIEW 5 BACS
Stack four 06702 TiltViews (A) on the floor of the cabinet.
No brackets are needed.
Apile cuatro unidades TiltView 06702 (A) en la parte inferior del
armario. No requieren soportes.
Empiler quatre TiltView 06702 (A) sur le plancher de l'armoire.
Aucune attache n'est nécessaire.
A
x 4
G
x 4
F
x 2
HANDLE
MANIJA
POIGNÉE
CARRIAGE BOLT AND FLANGE NUT
PERNO DE CARROCERÍA Y TUERCA CON BRIDA
BOULON DE CARROSSERIE ET ÉCROU À EMBASE
Install handles, (F) using (4 ea.) 5/16-16 x 3/4" carriage bolts, and (4
ea.) 5/16-18 flange nuts (G).
Instale las manijas, (F) utilizando 4 pernos de carrocería 5/16-16 x 3/4
pulg. y 4 tuercas de reborde 5/16-18 (G).
Posez les poignées (F) avec quatre (4) boulons de carrosserie de 5/16-16 x
3/4po et quatre (4) écrous à embase de 5/16-18 (G).
(12 sets)
(12 juegos)
(12 jeux)

3Hang 06704 TiltView on the back wall of the cabinet above the 06702 units.
Repeat for remaining TiltView units.
Akro-Mils, 1293 South Main St., Akron, Ohio 44301 • 800-253-2467 • Fax: [phone] • akro-mils.com • [email protected]
4
2Attach two TVCLIP TiltView hanging clips (E) to a 06704 TiltView (B).
3
©2015 Akro-Mils/Myers Industries, Inc. #AKM329 HD4824TV-010115 01/15
Attach two TVCLIP TiltView hanging clips (E) to a
06704 TiltView (B).
Conecte dos sujetadores colgantes TVCLIP (E) a
un TiltView 06704 (B).
Poser deux attaches de suspension TVCLIP
TiltView (E) sur un TiltView 06704 (B).
Hang 06704 TiltView on the back wall of the cabinet above the 06702 units. Repeat for remaining TiltView units.
Cuelgue un TiltView 06704 en la pared posterior del armario, encima de las unidades 06702. Repita este procedimiento
con las unidades TiltView restantes.
E
x 2
B
A
B
C
D
Suspendre le TiltView 06704 sur le panneau de fond de l'armoire au-dessus des TiltView 06702. Répéter avec les TiltView restants.
Akro-Mils prides itself in providing
your best value in storage, organization and
material handling products. If you have
any questions, comments or need assistance
with this product please call our
toll-free service number:
800-253-2467
Service representatives are available weekdays
from 8 a.m. to 5 p.m. Eastern Time to assist
you (outside normal business hours, leave a
message and we’ll get back to you).