Maytag MTUC7000AW Parts list manual

Without Trim Kit
Compactor
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
CABINET OPENING DIMENSIONS
CUSTOM PANELS
CLEARANCE DIMENSIONS
MTUC7000AW
This compactor is for use on a single phase, 115-
volt, 60 Hz, AC only, 15- or 20-amp fused and
properly grounded circuit and is equipped with a
grounding plug as shown below. It is
recommended that a separate circuit serving only
this appliance be provided.
18" min.
(45.7 cm)
24" min.
(61 cm)
A
15 min.
(38.7 cm)
34 " min.
(87 cm)
3" min.
(7.6 cm)
" A
B
341⁄8"
(86.7 cm)
24"
(61 cm)
15"
(38.1 cm)
29 ³⁄₈"
(74.6 cm)
15"
(38.1 cm)
25"
(63.5 cm)
15"
(38.1 cm)
1. Grounded electrical outlet
must be a minimum of 3"
(7.6 cm) away from
surrounding cabinets or
nearby walls as shown. It
can be placed either to the
left or the right side of the
product.
Panel should be 1/2"
(13 mm) min. thickness
1. Leave 6" (15.2 cm) of clearance
space to the right side of the
compactor in order to remove the
compactor bags.
2. Leave 23" (58.4 cm) of clearance in
front of the compactor in order to
fully open or remove the compactor
drawer.
Models with handles Models without handles
Panel should be 1/2" to 5/8"
(13 to 16 mm) thick. NOTE: A
thicker panel may need rounded
front corners and a cutout for
access to the handle.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. W10190314-D-MT
12/16/2009
23¹³⁄₁₆"
(60.5 cm)
15"
(38.1 cm) 15"
(38.1 cm)
25"
(63.5 cm)