MB QUART NAUTI NW1-254 Instruction Manual

If you are replacing an older or inferior woofer, the
location is chosen for you. Make sure the woofer
fits properly in the hole for the old woofer.
If you are creating your own new location, you
must be careful to verify that there is sufficient
depth to mount the woofer.
Choose a suitable
mounting location
Choose the proper
wiring configuration
Woofer Mounting Location
Woofer Dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new speakers. Many manufacturers locate
speakers behind interior panels that require special tools to
remove. Be careful and take your time.
If you are using the speaker wire supplied with your new
speakers make sure that you run the speaker wires only
through safe areas. Do not let speaker wire make contact with
metal edges or hot engine components.
Congratulations on your choice of a MBQuart Subwoofer.
This “Quick Start” Installation guide is meant to help
you complete a basic installation. For more detailed
information on system setting, speaker and subwoofer
configuration, and full specifications by model, visit our
website at mbquart.com
It’s a good idea to confirm that you have purchased the
correct size speakers to fit your application. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional.
ABCDE
NW1-254 / NW1-254L 10.79”(274) 2.91”(74) 1.97”(50) 6.65”(169) 9.09”(231)
Before you start
Carefully select a route for the audio signal
wires. If using existing speaker wires, confirm
that the wire is in good shape and not
shorted. In the case of an illuminated model,
route a positive and negative wire from a
switched +12V source. Avoid routing wires
through dangerous areas.
Route signal and
illumination wires
Wiring
Wiring
A
B
D
E
C
Audio Signal Connection
(larger terminals)
Illumination Connection
(smaller terminals)
4Ω
2Ω
8Ω

Quick Start
Installation Guide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period.Componentsthatprovetobedefectiveinmaterialsandworkmanshipunderproperinstallation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
NW1-254
NW1-254
NW1-254L
NW1-254L
NAUTIC
NAUTIC
MBQ NW wfr QSG 01 - rev2
Once you are sure the speaker fits and has
adequate clearance, connect the positive and
negative wires to the proper terminals. Securely
screw the speaker into place.
Confirm fit and
mount speaker
Woofer installation
Illumination control
T/S Parameters
Fs: 31.46 Hz Mms: 192.16g Vd: 0.285 L BL: 11.04 Tm
Qms: 4.48 Xmax: 8.65mm Qes: 1.07 QTS: 0.86
Vas: 20.64L Dia: 205mm Re: 3.34 Ohms no: 0.058%
Cms: 133.45
um/N Sd: 0.033 sq.m NomZ: 4.116 Ohms 1W/1M: 82 dB
If you have purchased an illuminated version, consider getting an N1-RC remote
control. The remote allows you to adjust color, speed and brightness of the
illumination. Check with an authorized MBQuart retailer or check our website
for further details.