MBD 102239 User manual

102239-2096/00-MBD-DEC2018
Suitable for electrical and commercial installations. Complies with the international standard for
empty enclosures as applied to low-voltage switchgear and control gear assemblies (IEC 62208:2011).
IP55 Kiosk Single Door
750x750x300mm Flat pack
STOCK CODE: 102239
Buy Online
Example: electrical indirect metering
814mm
300mm
754mm
KEY FEATURES
• Electromagnetic compatibility, ideal for protecting internal
electronic communication.
• Suitable for low-voltage switchgear and control gear
assemblies, meters, compressors, etc.
• Will not corrode, weather resistant to IP55 grade protection.
• High impact resistance up to 20 Kilojoules (IK10).
• Double insulation and electrically non-conductive (1000V).
• Triple lock system supported by non-corrosive vertical bars.
• Door hinges on right, 180º opening.
• Easily cleaned and can be painted.
SPECIFICATONS
• Constructed from GRP.
• Supplied with hinges, lock and key.
• Polyester back mounting plate (optional) available.
• Supplied in light grey colour (Ral 7035).
• Suitable for use in temperatures ranging from -30ºC to +120ºC.
• Made from non-hygroscopic material ensuring minimum
water absorption.
• Constructed from halogen-free and self-extinguishing
material.
• UV protected.
ASSOCIATED PRODUCTS
• 30.05.012BACK: Backplate
• EC1001: Black Hockey Stick suitable for use inside cavity walls
• EC1002: White Hockey Stick suitable for use on external walls
• 102242: Kiosk Pedestal, 750x750x300 Flat pack
DIMENSIONS
750mm high x 750mm wide x 300mm deep.
The overall height of this box is 814 mm and overall width is 754mm.
The opening size is 719mm x 678mm*.

ASSEMBLY INSTRUCTIONS
102239-2096/00-MBD-DEC2018
IP55 Kiosk Single Door
750x750x300mm Flat pack
STOCK CODE: 102239
750x300 Top
2 screws M6x40
washers M6
750x300 Side
3 screws M6x25
washers M6
screws M6x20
washers M6
750x300 Base
2 screws M6x20
washers M6
3 screws M6x20
washers M6
3 screws M6x25
washers M6
2 screws M6x40
washers M6
750x750 Back
4 screws M6x25
washers M6
Introduce hinge completely and turn
90 until fitting in the slot
Introduce hinge completely
and turn 90 until fitting in the slot
weather seal (Left,Top,Base)
Weather seal(8x8)
weather seal(8x8)
Note: Weather seal to be applied carefully to obtain specified weather protection (IP rating).
102239

102239-2096/00-MBD-DEC2018
1. Assemble the 2 sides first. Ensure the side with the black seal is at the right hand side, front facing.
The pre-drilled holes with inserts are to be kept at the back of the base plate.
2. Insert the screws to attach the sides to the base, do not fully tighten the screws at this stage. Turn
kiosk around, the back of the kiosk facing you.
3. Apply the sealant tape 8x8mm to the base rear side of base plate, the rear wall will be mounted
over this seal. Apply the second half of the sealant tape 8x8mm to the top of the back plate.
4. Assemble the back plate to the sides, inserting screws, again do not fully tighten at this stage at 4 corners.
ASSEMBLY INSTRUCTIONS
VIEW VIDEO ON

102239-2096/00-MBD-DEC2018
5. Insert longer dowels at the top of the back plate.
6. Insert the top plate.
7. Insert the 4 screws to attach the top plate to the sides.
8. Fully tighten all of the screws throughout the kiosk.
9. Insert the back plate and tighten screws.
ASSEMBLY INSTRUCTIONS

102239-2096/00-MBD-DEC2018
DOOR ASSEMBLY
IP55 Kiosk Single Door
750x750x300mm Flat pack
STOCK CODE: 102239
750x300 Top
2 screws M6x40
washers M6
750x300 Side
3 screws M6x25
washers M6
screws M6x20
washers M6
750x300 Base
2 screws M6x20
washers M6
3 screws M6x20
washers M6
3 screws M6x25
washers M6
2 screws M6x40
washers M6
750x750 Back
4 screws M6x25
washers M6
Introduce hinge completely and turn
90 until fitting in the slot
Introduce hinge completely
and turn 90 until fitting in the slot
weather seal (Left,Top,Base)
Weather seal(8x8)
weather seal(8x8)
Note: Weather seal to be applied carefully to obtain specified weather protection (IP rating).
102239
Note: Weather seal to be applied carefully to obtain specified weather protection (IP rating).

102239-2096/00-MBD-DEC2018
10. Apply sealant around 3 sides - bottom, left and top of the frame. Seal location shown in the drawing.
11. To attach the door, push down the bottom hinges, it will be placed in the groove located at the bottom corner
and top corner. Hinges to be turned 90⁰ to lock in place.
12. Push in the brass fitting and slide the lock cover up, turning clockwise with the key and pull out the handle.
13. Close the door as normal pulling down the handle to lock in place,
DOOR ASSEMBLY INSTRUCTIONS