1 Identification
Type marking: GoCreaseTM 3000
Manufacturer: MBM Corporation
www.mbmcorp.com
2 Specification
The machine is designed for the treatment of common office paper or of paper with similar physical-
chemical properties. The size of sheets is up to 12.6” x 17.7”, the maximum table width is 12.6” and
the maximum basis weight of the processed paper is up to 400g/m2.
3 Parameters
a) Paper size 5.8” x 8.3”, 8.3” x 11.7”,
11.7” x 16.5”, 12.6” x 17.7”
b) Max. machine working width 12.7”
c) Front table
Max. distance of stop from creasing/perf. tool 11.8”
Min. distance of stop from creasing/perf. tool 0.9”
d) Back table
Max. distance of stop from creasing/perf. tool 6.3”
Min. distance of stop from creasing/perf. tool 1.1”
e) Crease width 0.03” / 0.04” / 0.05”
f) Built-up area l = 18.5”
w = 14.6”
h = 14.2” (The lever at the top dead
center)
g) Transportation size l = 18.5”
w = 14.6”
h = 6.3” (The lever at the bottom dead
center)
h) Basis weight 80 – 400 g/m²(creasing)
80 – 250 g/m²(perforating)
i) Machine weight 24 lbs.
Note:The use of the machine requires that the extension size (see point f) be extended by a
working area necessary for handling the machine.
4 Prohibited activities
•The machine is designed only for the creasing of paper with the above set parameters.
•The machine can be operated only in protected, enclosed and covered areas (offices,
workshops).
•It is prohibited to operate the machine if its operation is not continuous; e.g. when it gets
jammed or is damaged.
•During operation the machine must be covered, complete and in perfect condition.
