McAfee QUICKCLEAN 1.0 User manual

McAfee QuickClean
User’s Guide
Version 1.0

COPYRIGHT
Copyright (c) 1999-2000 Networks Associates Technology, Inc. All Rights Reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into
any language in any form or by any means without the written permission of Networks Associates
Technology, Inc., or its suppliers or affiliate companies.
TRADEMARK ATTRIBUTIONS
* ActiveHelp, Bomb Shelter, Building a World of Trust, CipherLink, Clean-Up, Cloaking, CNX, * ActiveHelp, Bomb
Shelter, Building a World of Trust, CipherLink, Clean-Up, Cloaking, CNX, Compass 7, CyberCop, CyberMedia,
Data Security Letter, Discover, Distributed Sniffer System, Dr Solomon’s, Enterprise Secure Cast, First Aid,
ForceField, Gauntlet, GMT, GroupShield, HelpDesk, Hunter, ISDN Tel/Scope, LM 1, LANGuru, LeadingHelp
Desk Technology, Magic Solutions, MagicSpy, MagicTree, Magic University, MagicWin, MagicWord, McAfee,
McAfee Associates, MoneyMagic, More Power To You, Multimedia Cloaking, NetCrypto, NetOctopus, NetRoom,
NetScan, Net Shield, NetShield, NetStalker, Net Tools, Network Associates, Network General, Network Uptime!,
NetXRay, Nuts & Bolts, PC Medic, PCNotary, PGP, PGP (Pretty Good Privacy), PocketScope, Pop-Up,
PowerTelnet, Pretty Good Privacy, PrimeSupport, RecoverKey, RecoverKey-International, ReportMagic,
RingFence, Router PM, Safe & Sound, SalesMagic, SecureCast, Service Level Manager, ServiceMagic, Site Meter,
Sniffer, SniffMaster, SniffNet, Stalker, Statistical Information Retrieval (SIR), SupportMagic, Switch PM,
TeleSniffer, TIS, TMach, TMeg, Total Network Security, Total Network Visibility, Total Service Desk, Total Virus
Defense, T-POD, Trusted Mach,Trusted Mail, Uninstaller, Virex, Virex-PC, Virus Forum, ViruScan, VirusScan,
VShield, WebScan, WebShield, WebSniffer, WebStalker, WebWall, and ZAC 2000 are registered trademarks of
Network Associates and/or its affiliates in the US and/or other countries. All other registered and unregistered
trademarks in this document are the sole property of their respective owners.
LICENSE AGREEMENT
NOTICE TO ALL USERS: CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT
("AGREEMENT"), FOR THE LICENSE OF SPECIFIED SOFTWARE ("SOFTWARE") BY NETWORK
ASSOCIATES, INC. ("McAfee"). BY CLICKING THE ACCEPT BUTTON OR INSTALLING THE
SOFTWARE, YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) CONSENT TO BE BOUND BY
AND BECOME A PARTY TO THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS
OF THIS AGREEMENT, CLICK THE BUTTON THAT INDICATES THAT YOU DO NOT ACCEPT THE
TERMS OF THIS AGREEMENT AND DO NOT INSTALL THE SOFTWARE. (IF APPLICABLE, YOU
MAY RETURN THE PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND.)
1. License Grant. Subject to the payment of the applicable license fees, and subject to the terms and
conditions of this Agreement, McAfee hereby grants to you a non-exclusive, non-transferable right
to use one copy of the specified version of the Software and the accompanying documentation (the
"Documentation"). You may install one copy of the Software on one computer, workstation,
personal digital assistant, pager, "smart phone" or other electronic device for which the Software
was designed (each, a "Client Device"). If the Software is licensed as a suite or bundle with more
than one specified Software product, this license applies to all such specified Software products,
subjectto any restrictions or usage terms specified onthe applicable price list or product packaging
that apply to any of such Software products individually.
a. Use. The Software is licensed as a single product; it may not be used on more than one Client
Device or by more than one user at a time, except as set forth in this Section 1. The Software is "in
use" on a Client Device when it is loaded into the temporary memory (i.e., random-access
memory or RAM) or installed into the permanent memory (e.g., hard disk, CD-ROM, or other
Issued August 2000 / McAfee QuickClean v1.0

storage device) of that Client Device. This license authorizes you to make one copy of
the Software solely for backup or archival purposes, provided that the copy you make
contains all of the Software’s proprietary notices.
b. Server-Mode. You may use the Software on a Client Device as a server ("Server") within a
multi-user or networked environment ("Server-Mode") only if such use is permitted in the
applicable price list or product packaging for the Software. A separate license is required foreach
Client Device or "seat" that may connect to the Server at any time, regardless of whether such
licensed Client Devices or seats are concurrently connected to, accessing or using the Software.
Use of software or hardware that reduces the number of Client Devices or seats directly accessing
or utilizing the Software (e.g., "multiplexing" or "pooling" software or hardware) does not reduce
the number of licenses required (i.e., the required number of licenses would equal the number of
distinct inputs to the multiplexing or pooling software or hardware "front end"). If the number
of Client Devices or seats that can connect to the Software can exceed the number of licenses you
have obtained, then you must have a reasonable mechanism in place to ensure that your use of
the Software does not exceed the use limits specified for the licenses you have obtained. This
license authorizes you to make or download one copy of the Documentation for each Client
Device or seat that is licensed, provided that each such copy contains all of the Documentation’s
proprietary notices.(i.e., the required number of licenses would equal the number of distinct
inputs to the multiplexing or pooling software or hardware "front end"). If the number of Client
Devices or seats that can connect to the Software can exceed the number of licenses you have
obtained, then you must have a reasonable mechanism in place to ensure that your use of the
Software does not exceed the use limits specified for the licenses you have obtained. This license
authorizes you to make or download one copy of the Documentation for each Client Device or
seat that is licensed, provided that each such copy contains all of the Documentation’s proprietary
notices.
c. VolumeLicenses.If the Software is licensed with volume license terms specified in the applicable
price list or product packaging for the Software, you may make, use and install as many
additional copies of the Software on the number of Client Devices as the volume license
authorizes. You must have a reasonable mechanism in place to ensure that the number of Client
Devices on which the Software has been installed does not exceed the number of licenses you
have obtained. This license authorizes you to make or download one copy of the Documentation
for each additional copy authorized by the volume license, provided that eachsuch copy contains
all of the Documentation’s proprietary notices.
2. Term. This Agreement is effective for an unlimited duration unless and until earlier terminated as
set forth herein. This Agreement will terminate automatically if you fail to comply with any of the
limitations or other requirements described herein. Upon any termination or expiration of this
Agreement, you must destroy all copies of the Software and the Documentation. You may terminate
this Agreement at any point by destroying all copies of the Software and the Documentation.
3. Updates. For the time period specified in the applicable price list or product packaging for the
Software you are entitled to download revisions or updates to the Software when and as McAfee
publishes them via its electronic bulletin board system, website or through other online services.
For a period of ninety (90) days from the date of the original purchase of the Software, you are
entitled to download one (1) revision or upgrade to the Software when and as McAfee publishes it
via its electronic bulletin board system, website or through other online services. After the specified
time period, you have no further rights to receive any revisions or upgrades without purchase of a
new license or annual upgrade plan to the Software.
4. Ownership Rights. The Software is protected by United States copyright laws and international
treaty provisions. McAfee and its suppliers own and retain all right, title and interest in and to the
Software, including all copyrights, patents, trade secret rights, trademarks and other intellectual
property rights therein. Your possession, installation, or use of the Software does not transfer to you
any title to the intellectual property in the Software, and you will not acquire any rights to the
Software except as expressly set forth in this Agreement. All copies of the Software and
Documentation made hereunder must contain the same proprietary notices that appear on and in
the Software and Documentation.
User’s Guide iii

5. Restrictions. You may not rent, lease, loan or resell the Software. You may not permit
third parties to benefit from the use or functionality of the Software via a timesharing,
service bureau or other arrangement, except to the extent such use is specified in the
applicable list price or product packaging for the Software. You may not transfer any of
the rights granted to you under this Agreement. You may not reverse engineer,
decompile, or disassemble the Software, except to the extent the foregoing restriction is
expressly prohibited by applicable law. You may not modify, or create derivative works
based upon, the Software in whole or in part. You may not copy the Software or
Documentation except as expressly permitted in Section 1 above. You may not remove
any proprietary notices or labels on the Software. All rights not expressly set forth
hereunder are reserved by McAfee. McAfee reserves the right to periodically conduct
audits upon advance written notice to verify compliance with the terms of this
Agreement.
6. Warranty and Disclaimer
a. Limited Warranty. McAfee warrants that for sixty (60) days from the date of original
purchase the media (e.g., diskettes) on which the Software is contained will be free from
defects in materials and workmanship.
b. Customer Remedies. McAfee’s and its suppliers’ entire liability and your exclusive
remedy for any breach of the foregoing warranty shall be, at McAfee’s option, either (i)
return of the purchase price paid for the license, if any, or (ii) replacement of the
defective media in which the Software is contained. You must return the defective
media to McAfee at your expense with a copy of your receipt. This limited warranty is
void if the defect has resulted from accident, abuse, or misapplication. Any replacement
media will be warranted for the remainder of the original warranty period. Outside the
United States, this remedy is not available to the extent McAfee is subject to restrictions
under United States export control laws and regulations.
c. Warranty Disclaimer. Except for the limited warranty set forth herein, THE
SOFTWARE IS PROVIDED "AS IS." TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, MCAFEE DISCLAIMS ALL WARRANTIES, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NONINFRINGEMENT WITH RESPECT TO THE SOFTWARE AND THE
ACCOMPANYING DOCUMENTATION. YOU ASSUME RESPONSIBILITY FOR
SELECTING THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR
THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE
SOFTWARE. WITHOUT LIMITING THE FOREGOING PROVISIONS, MCAFEE
MAKES NO WARRANTY THAT THE SOFTWARE WILL BE ERROR-FREE OR FREE
FROM INTERRUPTIONS OR OTHER FAILURES OR THAT THE SOFTWARE WILL
MEET YOUR REQUIREMENTS. SOME STATES AND JURISDICTIONS DO NOT
ALLOW LIMITATIONS ON IMPLIED WARRANTIES, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. The foregoing provisions shall be enforceable to the
maximum extent permitted by applicable law.
iv McAfee QuickClean

7. Limitation of Liability. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL
THEORY, WHETHER IN TORT, CONTRACT, OR OTHERWISE, SHALL MCAFEE OR
ITS SUPPLIERS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR FOR
ANY AND ALL OTHER DAMAGES OR LOSSES. IN NO EVENT WILL MCAFEE BE
LIABLE FOR ANY DAMAGES IN EXCESS OF THE LIST PRICE MCAFEE CHARGES
FOR A LICENSE TO THE SOFTWARE, EVEN IF MCAFEE SHALL HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
TO THE EXTENT THAT APPLICABLE LAW PROHIBITS SUCH LIMITATION.
FURTHERMORE, SOME STATES AND JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THIS LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU. The foregoing
provisions shall be enforceable to the maximum extent permitted by applicable law.
8. United States Government.The Software and accompanying Documentation are deemed
to be "commercial computer software" and "commercial computer software
documentation," respectively, pursuant to DFAR Section 227.7202 and FAR Section
12.212, as applicable. Any use, modification, reproduction, release, performance, display
or disclosure of the Software and accompanying Documentation by the United States
Government shall be governed solely by the terms of this Agreement and shall be
prohibited except to the extent expressly permitted by the terms of this Agreement.
9. Export Controls. Neither the Software nor the Documentation and underlying
information or technology may be downloaded or otherwise exported or re-exported (i)
into (or to a national or resident of ) Cuba, Iran, Iraq, Libya, North Korea, Sudan, Syria or
any other country to which the United States has embargoed goods; or (ii) to anyone on
the United States Treasury Department’s list of Specially Designated Nations or the
United States Commerce Department’s Table of Denial Orders. By downloading or using
the Software you are agreeing to the foregoing and you are certifying that you are not
located in, under the control of, or a national or resident of any such country or on any
such list.
IN ADDITION, YOU SHOULD BE AWARE OF THE FOLLOWING: EXPORT OF THE
SOFTWARE MAY BE SUBJECT TO COMPLIANCE WITH THE RULES AND
REGULATIONS PROMULGATED FROM TIME TO TIME BY THE BUREAU OF
EXPORT ADMINISTRATION, UNITED STATES DEPARTMENT OF COMMERCE,
WHICH RESTRICT THE EXPORT AND RE-EXPORT OF CERTAIN PRODUCTS AND
TECHNICAL DATA. IF THE EXPORT OF THE SOFTWARE IS CONTROLLED UNDER
SUCH RULES AND REGULATIONS, THEN THE SOFTWARE SHALL NOT BE
EXPORTED OR RE-EXPORTED, DIRECTLY OR INDIRECTLY, (A) WITHOUT ALL
EXPORT OR RE-EXPORT LICENSES AND UNITED STATES OR OTHER
GOVERNMENTAL APPROVALS REQUIRED BY ANY APPLICABLE LAWS, OR (B) IN
VIOLATION OF ANY APPLICABLE PROHIBITION AGAINST THE EXPORT OR
RE-EXPORT OF ANY PART OF THE SOFTWARE.
User’s Guide v

SOME COUNTRIES HAVE RESTRICTIONS ON THE USE OF ENCRYPTION WITHIN
THEIR BORDERS, OR THE IMPORT OR EXPORT OF ENCRYPTION EVEN IF FOR
ONLY TEMPORARY PERSONAL OR BUSINESS USE. YOU ACKNOWLEDGE THAT
THE IMPLEMENTATION AND ENFORCEMENT OF THESE LAWS IS NOT ALWAYS
CONSISTENT AS TO SPECIFIC COUNTRIES. ALTHOUGH THE FOLLOWING
COUNTRIES ARE NOT AN EXHAUSTIVE LIST THERE MAY EXIST RESTRICTIONS
ON THE EXPORTATION TO, OR IMPORTATION OF, ENCRYPTION BY: BELGIUM,
CHINA (INCLUDING HONG KONG), FRANCE, INDIA, INDONESIA, ISRAEL,
RUSSIA, SAUDI ARABIA, SINGAPORE, AND SOUTH KOREA. YOU
ACKNOWLEDGE IT IS YOUR ULTIMATE RESPONSIBILITY TO COMPLY WITH ANY
AND ALL GOVERNMENT EXPORT AND OTHER APPLICABLE LAWS AND THAT
MCAFEE HAS NO FURTHER RESPONSIBILITY AFTER THE INITIAL SALE TO YOU
WITHIN THE ORIGINAL COUNTRY OF SALE.
10. High Risk Activities. The Software is not fault-tolerant and is not designed or intended
for use in hazardous environments requiring fail-safe performance, including without
limitation, in the operation of nuclear facilities, aircraft navigation or communication
systems, air traffic control, weapons systems, direct life-support machines, or any other
application in which the failure of the Software could lead directly to death, personal
injury, or severe physical or property damage (collectively, "High Risk Activities").
McAfee expressly disclaims any express or implied warranty of fitness for High Risk
Activities.
11. Miscellaneous. This Agreement is governed by the laws of the United States and the State
of California, without reference to conflict of laws principles. The application of the
United Nations Convention of Contracts for the International Sale of Goods is expressly
excluded. This Agreement sets forth all rights for the user of the Software and is the entire
agreement between the parties. This Agreement supersedes any other communications
with respect to the Software and Documentation. This Agreement may not be modified
except by a written addendum issued by a duly authorized representative of McAfee. No
provision hereof shall be deemed waived unless such waiver shall be in writing and
signed by McAfee or a duly authorized representative of McAfee. If any provision of this
Agreement is held invalid, the remainder of this Agreement shall continue in full force
and effect. The parties confirm that it is their wish that this Agreement has been written
in the English language only.
12. McAfee Customer Contact. If you have any questions concerning these terms and
conditions, or if you would like to contact McAfee for any other reason, please call (408)
988-3832, fax [phone], orwrite: McAfee Software, 3965 Freedom Circle, Santa Clara,
California 95054. http://software.mcafee.com.
Statements made to you in the course of this sale are subject to the Year 2000 Information
and Readiness Disclosure Act (Public Law 105-271). In the case of a dispute, this Act may
reduce your legal rights regarding the use of any statements regarding Year 2000
readiness, unless otherwise specified in your contract or tariff.
vi McAfee QuickClean

User’s Guide vii
Table of Contents
Chapter 1. Welcome to QuickClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Using QuickClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Chapter 2. Installing QuickClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Installing QuickClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Create the SmartLinks database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Updating the SmartLinks database . . . . . . . . . . . . . . . . . . . . . . . . .12
About the Interview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Putting QuickClean to work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
About QuickClean wizards? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
About PowerClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Changing QuickClean defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
About McAfee Guardian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Chapter 3. Freeing Disk Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Using QuickClean Lite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Keeping computer free of unnecessary files . . . . . . . . . . . . . . . . . . . . . .19
Setting up QuickClean Lite to run automatically . . . . . . . . . . . . . . . . . .19
Scheduling QuickClean Lite to run at a specific time . . . . . . . . . . . . . . .20
Using SpaceMaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Freeing specific amount of disk space on a drive . . . . . . . . . . . . . . . . .20
Changing defaults for SpaceMaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Chapter 4. Managing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Using Remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Getting rid of an application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Using Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Making a copy of an application to rebuild on another computer . . . . .25
Rebuilding a transported application on another computer . . . . . . . . .25
Using Archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Archiving an application to be used later . . . . . . . . . . . . . . . . . . . . . . . .26

User’s Guide viii
Table of Contents
Using Move . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Moving an application from one location to another . . . . . . . . . . . . . . .27
Using BackTrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Monitoring installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Setting BackTrack Monitor to run in the background . . . . . . . . . . . . . .29
Monitoring installation of a single application . . . . . . . . . . . . . . . . . . . .29
Undoing an monitored application installation . . . . . . . . . . . . . . . . . . . .29
Chapter 5. Restoring Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Using Restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Restoring an archived or backed-up application . . . . . . . . . . . . . . . . . .31
Restoring deleted files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Getting rid of backup copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
About Activity Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Viewing what QuickClean has done . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Chapter 6. Using PowerClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
PowerClean feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
PowerClean feature open in read-only mode . . . . . . . . . . . . . . . . . . . . .38
Working with the PowerClean feature . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Default file groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Creating a custom group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
PowerClean command menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Using the tab panes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
About color codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Changing the defaults for the PowerClean feature . . . . . . . . . . . . . . . . .44
Viewing what PowerClean feature has done . . . . . . . . . . . . . . . . . . . . . .45
Appendix A. Product Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
How to Contact McAfee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Support via the web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Telephone support numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

1
User’s Guide 9
1Welcome to QuickClean
QuickClean can be used for many more purposes than simply uninstalling old
applications.
For example, QuickClean can clean up junk files that have built up on your
computer as you browsed the Internet, and it can do this cleanup
automatically on a schedule that you specify. QuickClean can also move
applications from one hard disk to another—even to another computer—and
change all references to the application at the same time.
Consider the following questions for more suggestions.
Using QuickClean
Think about how you use your computer toseehowuseful QuickClean can be.
Do you….
•Have programs that you don’t use anymore, for example games that you
don’t play frequently?
Use the Archive wizard to create an archive of programs or games by
compressing them. Then when you want to play a game again, click the old
shortcut to the game and let QuickClean restore it to its original location.
•Use the Internet?
When you surf the Internet, your computer can collect megabytes of
Internet junk files. Images, plug-ins, and other files you won’t need again
are downloaded to your computer. QuickClean Lite can delete these files
quickly and reclaim disk space.
•Have a Zip®drive or other large-capacity removable disk drive?
QuickClean’s Archive and Transport wizards can compress entire
applications to a large removable disk. When you want the applications
again, you restore them to the original computer or rebuild them on a
different computer without losing any setup information.
Perhaps more importantly, you can specify that QuickClean backups
should be stored on a large removable disk to save space on your internal
hard drive.
•Have a new, second hard disk?
Use the Move wizard to relocate applications on the new disk and free
space on the old disk without losing any setup information.

Welcome to QuickClean
10 McAfee QuickClean
•Have outdated applications that you will never use again?
If you have old applications that you no longer use, the Remove wizard
will remove all traces of them from your computer.
Of course, if you think you might use an application again in some
circumstances, you can use the Archive wizard to create a compressed
backup copy and keep shortcuts to the application on your computer so
that you can restore it easily.
About this manual
This manual contains general information about usingQuickClean.It doesnot
describe step-by-step use of the QuickClean wizards.
More detailed procedural information and step-by-step information about the
wizards are contained in the online help. In any dialog box, click Help for
specific information about the dialog box. When using the PowerClean
feature, click PowerClean Help on the Help menu.
For information on new additions to QuickClean, you can also open the
Readme.txt file located in the QuickClean folder on your computer to view
additional information.

2
User’s Guide 11
2Installing QuickClean
The installation program on the QuickClean CD lets you install the program
easily on your computer. Installation should start automatically when you put
the CD in the CD-ROM drive. The information in the following paragraphs
will help you install and start using QuickClean.
Installing QuickClean
You can install and run QuickClean if your computer is running Windows®95
or later, or Windows NT 4.0 or later.
NOTE: To install QuickClean on Windows NT, you must be logged in as
a user who has Administrator privileges.
To install QuickClean:
1. Insert the QuickClean CD into your CD drive.
The installation wizard should start automatically. If it does not,click the
drive letter of your CD drive in Windows Explorer, and double-click the
file named Setup.exe in the file list.
2. In the first installation wizard page, click Install QuickClean.
3. Follow the instructions in the wizard pages to choose the drive and
folder where QuickClean should be installed.
After each step, click Next.
4. Click Finish in the final setup screen.
By default, the Readme file appears in Notepad. If you do not want to
read the release notes in the Readme file, clear the check in the View
release notes? check box before you click Finish.

Installing QuickClean
12 McAfee QuickClean
Create the SmartLinks database
The SmartLinks database stores information about the relationship between
files on your computer. It stores the names and locations of all files needed by
the operating system. For each application, the SmartLinks database stores
information about all of the files that the application needs to run correctly,
including icons, dynamically linked libraries (DLLs), and other executable
files, as well as operating system files that are used by the application. This
information makes the SmartLinks database a complete, cross-referenced
record of how executable and system files are used on your computer.
It is this information that makes using QuickClean quick and safe. It ensures
that applications can be moved, archived, deleted, and transported safely and
completely, and it determines the files that can be safely deleted without
damaging an application or the operating system.
The SmartLinks database is created when you install QuickClean. Because
building the database the first time can take several minutes, it is created in the
background as you provide some default information in an interview wizard.
Updating the SmartLinks database
After QuickClean has created the SmartLinks database for your computer,
updating it takes much less time. Only records for files that have changed are
updated.
QuickClean updates the SmartLinks database in the following circumstances:
•Each time you start QuickClean, the old version of the database is
compared with new information on your computer.
•After you restore files or applications from QuickClean backup copies,
QuickClean records changes that it has just made.
•After you delete or archive files or applications, QuickClean records
changes.
•After you manually select a wizard from the main QuickClean screen,
QuickClean records changes that the wizard makes.
About the Interview
As you install QuickClean, you answer a few questions about how you use
files on your computer, and whether you want to schedule some QuickClean
events.
To run the interview again, click Customization Interview on the Options
menu in the main QuickClean screen.

User’s Guide 13
Installing QuickClean
The Settings dialog box pages also let you view or change all settings that you
specifiedintheinterview. For information aboutusingthe Settings dialogbox,
see “Changing QuickClean defaults,”on page 14.
Putting QuickClean to work
QuickClean uses safe and simple wizards to perform its major tasks. When
you use an QuickClean wizard to clean up your hard disk or manage
applications, at each step you see exactly what you are specifying, and you can
go back to previous screens and change options if you change your mind.
Even if you are an expert computer user, QuickClean wizards can automate
tasks, such as removing junk files, that would otherwise be time-consuming or
error-prone.
To run a QuickClean wizard, click its button in the main QuickClean window.
About QuickClean wizards?
QuickClean wizards simplify cleaning up disk space and managing
applications.
NOTE: Wizards are designed to be easy to understand and to use. Each
wizard screen tells you what you need to know to enter information or
choose options. If you want to know more about a wizard, click Help.
By default, SpaceMaker and Remove wizards create backup copies of files
before they are deleted. Although you can turn off backup creation when you
run the wizard, it is a good idea to make backups. Later, when you are sure
that you do not want to undo any QuickClean actions, you can delete the
backup copy.
Table 2-1. The QuickClean wizards
This wizard... Does this...
QuickClean
Lite Deletes various kinds of junk files and unconnected items on various folders such as your PC’s Internet Cache, Recycle Bin,
Temporary Files, Shortcut and Windows Registry.
QuickClean can be scheduled to run automatically at any
interval you specify.
Remove Deletes any application you specify, and removes all related
shortcuts and Registry entries.

Installing QuickClean
14 McAfee QuickClean
About PowerClean
PowerClean is not a wizard. It is a feature that lets you see files on your
computer, organized into categories, such as Internet Junk, Duplicate Files,
Archives, Multimedia Files, and so on. The feature also displays application
information that is stored in the Windows Registry.
If you are an experienced computer user, you can use PowerClean to manage
files manually. If you are interested in tracking specific files or files in specific
folders, you can even create custom files groups.
Changing QuickClean defaults
As you install QuickClean, you have the chance to change some basic defaults
in the Interview. Later, after QuickClean is installed, you can use the Settings
dialog box to review or change all default settings.
Archive Compresses an application into a backup file that you can
restore whenever you need it again. You can also include data
files that are associated with the application, if there are any.
Move Relocates an application. Completely moves an application
from one drive or folder to another—even to another
computer—and adjusts shortcuts and Registry entries to refer
to the application in its new location.
Transport Packages an application so that you can rebuild it with the
same option settings on another computer. You can also select
and include data files that are associated with the application.
Restore Restores deleted applications or files if backup copies were
created.
You can restore an entire application, a few files from an
application, or a few miscellaneous files, such as those deleted
by Remove or SpaceMaker—but only if backup copies were
created before the files were deleted.
BackTrack Monitors application installation.
Lets you undo the installation of any application if it was
monitored by BackTrack.
SpaceMaker Deletes old files in specific categories until it has freed the
amount of disk space you specify.
Table 2-1. The QuickClean wizards (Continued)
This wizard... Does this...

User’s Guide 15
Installing QuickClean
To see exactly what the default settings are, or to change them, click Settings
on the Options menu in the main QuickClean screen. Then in the next window
displayed, select any of the buttons available corresponding to the component
category you want to change the default setting on or view its default settings.
NOTE: The SpaceMaker, BackTrack, and QuickClean Lite wizards and
the PowerClean feature all have Settings dialog box pages where you
specify their default behavior, including the age that files must be before
they can be deleted.
You can change most option settings temporarily when you run a wizard, and
you can open the Settings dialog box page for the wizard andmake permanent
changes to the default.
Table 2-2 on page 15 provides a brief description of each Settings dialog box
page and tells you where to find more information.
NOTE: For information about any Settings dialog box page, click Help.
Table 2-2. Options in the Settings dialog box
Options on this page... Set this default behavior to determine...
General Which drives are tracked by the SmartLinks database,
and which files and folders are excluded from all
wizard or PowerClean lists.
Click Help in the General page of the Settings dialog
box for information about these options.
SpaceMaker How old files must be before they can be deleted, and
which kinds of files can be deleted.
PowerClean Whether backups are created for deleted files, how old
files must be before they can be deleted, and other
delete protection options.
BackTrack Whether BackTrack’s Installation Monitor runs as you
work, which kinds of installations it monitors, and
how long BackTrack archives are kept before they are
deleted.

Installing QuickClean
16 McAfee QuickClean
About McAfee Guardian
You use McAfee Guardian to schedule the QuickClean Lite wizard that keeps
your computer free of junk files and to set up Installation Monitor so that it
either does or does not run in the background as you work.
ÐTIP: If the Guardian icon does not appear in the taskbar, start Guardian
by clicking McAfee Guardian from the QuickClean menu in the
Windows Start menu Programs list.
McAfee Guardian is the program that all McAfee Software applications use to
manage scheduled and as-you-work events.
QuickClean How old files must be before they can be deleted, and
what kinds of files can be deleted.
Folders The default backup, Archive, BackTrack, and
Transport compressed file locations.
Click Help in the Folders page of the Settings dialog
box for information about these options.
Table 2-2. Options in the Settings dialog box (Continued)
Options on this page... Set this default behavior to determine...

User’s Guide 17
Installing QuickClean
To schedule an QuickClean event:
1. Right-click the Guardian icon in the clock area of the Windows taskbar,
and choose What’s Scheduled from the popup menu.
Figure 2-1. Scheduling events
The What’s Scheduled dialog box appears.
2. Select QuickClean or Installation Monitor from the list of scheduled
events in the Events window and click Schedule to open the Event
Schedule dialog box. The default scheduled events are:
•Qclean.exe
•Rebuild the Smartlinks Database
•Run Installation Monitor in the Background
3. Choose the time or interval when you want the event to run, or choose
Never to turn off an as-you-work or scheduled event.
ÐTIP: If you are running QuickClean, you can schedule events selecting
Settings on the Options menu on the main QuickClean screen and
choosing QuickClean. For more information about scheduling, click
Help.

Installing QuickClean
18 McAfee QuickClean

3
User’s Guide 19
3Freeing Disk Space
Windows applications and the Internet can clutter your hard disk with large
unused files that take up disk space. Set up and schedule the automatic
QuickClean wizard to clean up these files at specified intervals, or use the
SpaceMaker wizard to clean up more kinds of files.
Using QuickClean Lite
Keeping computer free of unnecessary files
Use the QuickClean Lite wizard to perform any of the following actions to
keep your computer free of unused files and invalid shortcuts:
•Remove unused files in the cache folder of your Internet browser.
•Remove any temporary files in folders that are used by applications and
Windows.
•Clean up shortcuts, Registry entries, and remove references in operating
system files that are not connected to any application.
•Empty the Recycle Bin.
When you click CleanUp in the QuickClean window, the QuickClean Lite
wizard appears. You select the kind of cleaner action you want it to perform
and then click Next to run the cleanup.
You can also schedule QuickClean Lite to run automatically, as described in
the following section.
To remove more files of different kinds and free a specific amount of disk
space, use the SpaceMaker wizard.
Setting up QuickClean Lite to run automatically
You can run QuickClean Lite whenever you need it, or you can set up
QuickClean to get rid of unnecessary files and junk on your computer at
regular intervals while you work.

Freeing Disk Space
20 McAfee QuickClean
To set up QuickClean Lite:
1. ClickSettingson theOptions menu in the main QuickClean window and
select the QuickClean Lite button.
Make sure that the QuickClean Lite options are set the way you want
them. The defaults in the QuickClean Lite page of the Options dialog box
specify what kind of files and settings can be removed. You can also click
Schedule to specify the schedule for running QuickClean Lite
automatically.
2. Click CleanUp in the main QuickClean window; then select QuickClean
Lite to run the wizard manually once to see the default settings in action.
Scheduling QuickClean Lite to run at a specific time
Events for McAfee applications are managed by the McAfee Guardian. Each
McAfee application adds to the list of events that the Guardian can run at a
scheduled time.
To change the QuickClean Lite schedule:
1. Right-click the red and white McAfee Guardian icon in the clock area of
the taskbar, and then select What’s Scheduled on the menu.
2. In the What’s Scheduled dialog box, select QuickClean Lite and click
Schedule.
3. In the Event Schedule dialog box, choose the time interval for
QuickClean Lite to run from the dropdown list box.
Using SpaceMaker
Freeing specific amount of disk space on a drive
If you need a specific amount of disk space on one of your drives, click
SpaceMaker in the QuickClean screen and tell the SpaceMaker wizard how
much space you want, what kind of files it can delete, and whether you want
it to make compressed backup copies of the files. Then let it free space for you.