McDantim Trumix Single User manual
WARNING:
This product can expose you to chemicals including lead and lead compounds, which are known
McDantim, Inc. Limited Five Year Warranty
McDantim, Inc.
performance of this product, McDantim, Inc.
refund the original sale price upon return of this product to McDantim, Inc.
LIMITED WARRANTY
McDantim, Inc. warrants each product to be free from defects in material and workmanship under
McDantim, Inc. under this
to McDantim, Inc.
DISCLAIMER OF WARRANTY
McDantim, Inc.
McDantim, Inc.
McDantim, Inc. neither assumes nor authorizes
PLEASE KEEP INSTRUCTIONS WITH YOUR PURCHASE RECEIPT FOR YOUR RECORDS!
Thank You for purchasing the McDantim, Inc. Trumix®
The McDantim, Inc. Trumix®
gas, your Trumix®
With the Trumix®Gas Blender Panel you are dealing with pressurized gases. Serious
injury or death can result from improper , use or service. All work on these
systems should be carried out by
to the equipment involved in these systems! The dangers include, but are not limited to,
EXPLOSION if the maximum safe pressures for any of the individual components of the
system are exceeded or ASPHYXIATION
Installa on Instruc ons for the
Trumix®Gas Blender Panel
R
An Employee Owned Company
Beverage: Single / Double & High Flows (w/ ILLI)
Installa� on Instruc� ons
Step 1: Determine the best loca� on for the blender! Please consider the following:
Step 2: Mount panel to wall!
Step 3: Hook up gas supply and outlet!
only
DO NOT ATTEMPT TO REMOVE INLET OR OUTLET FITTINGS.
Opera� on Guidelines and Helpful Hints
NOTES:
McDantim, Inc.!
4) NEVER EXCEED THE RECOMMENDED PRESSURES FOR ANY PART OF YOUR SYSTEM!
Trouble-shoo� ng: No Outlet Gas
If pressure is good:
McDantim, Inc.There are
no user-serviceable parts within the panel. Anything done to the internal parts will aff ect the blend
and void the warranty.
If you encounter other ques� ons or problems call:
McDantim, Inc. (888) 735-5607 or (406) 442-5153
Warning! With this or any compressed gas system,
there are certain dangers. If you do not have the
experience to understand these dangers, use a
professional installer.
Trumix®Gas Blender Panel
Installaon Instrucons
Use primary regulators on your
gas source suitable for your
panel specicaons.
Example: If your inlet pressure
label states “Min. inlet pressure
55 psi” then you must provide at
least 55 psi to the Blender Panel.
1. Use thread sealant.
2. Do not remove ngs.
3. Use back-up wrenches.
Plug & Play In Line Leak Indicator Installaon Instrucons (ILLI)
(may not be included - can be purchased using part # MV098)
1. Remove vinyl caps from stand pipes and slide into female compression ngs that are installed on the McDanm Trumix® panel.
2. Tighten the compression ngs nger ght to hold the ILLI in place and screw mounng bracket securely to the wall.
3. Re-check that ngs are nger ght and then turn both compression ng hex nuts another three quarters of a turn (14 mm size).
4. Once the ILLI is installed, hook up the inlet gases to the installed hose barbs and bring the panel up to pressure
with the outlet ball valves closed.
Note: At this point you should not see any leaks by referencing the indicator,
if you do see a leak you may need to ghten the compression ngs further.
N2CO2
Use reinforced tubing suitable for 150 psi.
Mixed Gas Out
Plug & Play
ILLI
NOTE
These instrucons apply to the Trumix®Single and
Trumix®Double as well as their High Flow models.
The picture to the right is of a Trumix®Double . The
Trumix®Single will have only one outlet assembly,
which is on the right-hand side.
TM-2-HPR+ILLI
Installaon Instrucons
Step 1: Determine the best locaon for the blender! Please consider the following:
A) Selectalocaonthatminimizesthechanceofaccidentaldamagetotheblender.
B) Selectalocaonasnearasispraccaltoboththesupplysourcesandthesuppliedequipment.
C) Selectalocaonallowingconvenientaccesstotheshutovalveforservicing.
D) Mountpanelinaweather-proofareaonly.
Step 2: Mount panel to wall!
Step 3: Hook up gas supply and outlet!
A) Useonlythegasesshownonthepanellabel(s).
B) Makesureyouaresupplyingthepanelwithclean,drygasesthatarebetweentheminimumandmaximumpressuresas
indicatedonthepanellabel.
C) Turnshut-ovalve(s)onpaneltotheoposion.
D) Makesurethetubingfromthegassourcesiscompablewiththengsonthepanel.
DO NOT ATTEMPT TO REMOVE INLET OR OUTLET FITTINGS.
E) Installappropriatetubingadaptorsintheinletngs.Besuretousethreadsealantandback-upwrenches.Connect
gasessupplylinestoinletngs.
F) Conrmthatyoursystemandrelatedequipmentissafeandreadyforpressurizedmixedgas.
G) Connectmixedgassupplytubetomixedgasoutletng.
H) Turnonthesupplygasesandchecksupplysystemandngsforleaks.
I) Adjustoutletpressureregulatortodesiredoutletpressure.ReadoutletpressureonOutletPressureGauge.
J) Openmixedgassupplyshutovalveandchecksystemforleaks.
Operaon Guidelines and Helpful Hints
NOTES:
1) Supplythepanelwithcleangases.
2) Besurenoliquidcangetintotheblenderasthiswillrenderituselessandvoidthewarranty.
3) SomengsonthepaneldonothavestandardUSthreads,andshouldnotberemovedwithoutcheckingwith
McDantim, Inc.!
4) NEVER EXCEED THE RECOMMENDED PRESSURES FOR ANY PART OF YOUR SYSTEM!
Adjusng the outlet pressure.
1) Closeshut-ovalve.Thisallowsyoutoreadpressurechangesquickly.
2) Pullouttheadjusngstemofregulator.
3) Readpressureonpressuregauge.
4) Adjustpressure.Increasebyturningclockwise.Note:Whendecreasingpressure,alwaysreducepressuretobelowthe
desiredlevelandthenincreasetodesiredseng.
5) Pushinadjusngstemofregulatortolock.
6) Openshut-ovalve.
Trouble-shoong: No Outlet Gas
1) Closeshut-ovalve.Checkpressureonpressuregauge.Ifpressureisloworzero,check:
a) Outletregulatorforadjustment.(See“Adjusngtheoutletpressure”above.)
b) Bothsupplygases.(Oneorbothcouldbeempty,turnedooroutofadjustment.)
c) Forblockageofeithersupplylineorforaclosedvalvewithinthesupplysystem.(Theblendershutsoifeither
supplygasisunavailable.)
If pressure is good:
d) Openshut-ovalvecompletely.
2) Ifyouconnuetohavenogas,closeshut-ovalve,removetubingfromoutlet,openshut-ovalveandcheckforgas
ow.
3) Ifyousllhavenosupplygas,callMcDantim, Inc.oryourgassupplierorserviceperson.There are no user-
serviceable parts within the panel. Anything done to the internal parts will aect the blend and void the warranty.
If you encounter other quesons or problems call:
McDantim, Inc. (888) 735-5607 or (406) 442-5153.
McDantim, Inc. Limited Five Year Warranty
Warranty not valid outside the Connental USA
If the mechanics of this product are found to be defecve in materials or workmanship within
ve years from the date of purchase, McDantim, Inc. will repair or replace, at its opon, the
defecve product or component part. If for any reason the original purchaser is unsased with the
performance of this product, McDantim, Inc. will, at the purchaser’s opon, replace the product or
refund the original sale price upon return of this product to McDantim, Inc. Please retain receipt
for proof of purchase. Proof of purchase is required for any warranty service or claim. Your receipt is
your warranty card.
LIMITED WARRANTY
McDantim, Inc. warrants each product to be free from defects in material and workmanship under
normal use and service for ve years from date of sale. The obligaon of McDantim, Inc. under this
warranty is limited to the replacement of defecve parts. Noce of defecve parts must be submied
to McDantim, Inc. within ve year and 15 days of date of sale. This warranty does not cover
shipping, handling, or freight charges.
DISCLAIMER OF WARRANTY
WARRANTY IS INVALID IF PURCHASER FAILS TO PROPERLY OPERATE AND/OR MAINTAIN THE
PRODUCT. THIS WARRANTY IS NOT TRANSFERABLE TO THIRD PARTIES. THIS WARRANTY IS EXPRESSLY
IN LIEU OF ALL OTHER WARRANTIES AND REPRESENTATIONS, EXPRESSED OR IMPLIED EXCEPT AS
STATED ABOVE. THERE IS NO WARRANTY FOR FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY
OF MERCHANTABILITY.
EXCEPT AS OTHERWISE AGREED HEREIN McDantim, Inc. SHALL NOT BE LIABLE FOR SPECIAL OR
CONSEQUENTIAL DAMAGES, SUCH AS, BUT NOT LIMITED TO DAMAGE TO OR LOSS OF OTHER
PROPERTY OR EQUIPMENT, LOSS OF PROFIT OR REVENUE, LOSS OF USE OF THE PRODUCT , COST
OR REPLACEMENT OF THE PRODUCT, OR CLAIMS BY CUSTOMERS FOR LOSS DUE TO SERVICE
INTERRUPTIONS. THE REMEDIES OF THE PURCHASER SET FORTH HEREIN ARE EXCLUSIVE, AND THE
LIABILITY OF McDantim, Inc. WITH RESPECT TO ANY CONTRACT SHALL NOT, EXCEPT AS EXPRESSLY
PROVIDED HEREIN, EXCEED THE PRICE OF THE EQUIPMENT OR PART ON WHICH SUCH LIABILITY IS
BASED.
This warranty applies only to the original registered purchaser. TAMPERING, ACCIDENT, ABUSE,
NEGLECT, UNAUTHORIZED REPAIRS OR OTHER CAUSES UNRELATED TO DEFECTIVE MATERIALS OR
WORKMANSHIP WILL VOID THIS WARRANTY. McDantim, Inc. neither assumes nor authorizes
any representave or other person to assume for us any liability in connecon with the sales or any
shipment of our products.
PLEASE KEEP INSTRUCTIONS WITH YOUR PURCHASE RECEIPT FOR YOUR RECORDS!
This manual suits for next models
1
Table of contents
Popular Control Unit manuals by other brands
Navico
Navico BSM-1 installation manual
Watermark
Watermark Reefe rainpro RM1500-2 Installation and operating instructions
Meinberg
Meinberg IMS BPE-3050 Setup guide
Bray
Bray 752 Series Installation, operation and maintenance manual
Trenz Electronic
Trenz Electronic TE0712 200 2C10 Series Schematics
Nakanishi
Nakanishi E800Z Operation manual
Texas Instruments
Texas Instruments bq20z70EVM-001 user guide
Fujitsu
Fujitsu UTP-VX60A installation manual
BFT
BFT SUPER MA instruction manual
National Instruments
National Instruments NI 9425E Operating instructions and specifications
A.R.I.
A.R.I. Eliptix R-30RM Installation, operation and maintenance
Trane
Trane CNT06197 Installer's guide