mControl HT400 User manual

WHAT IS SMART ROOM THERMOSTAT?
Smart Room Thermostat is a device which allows you to control your heating equipment via App even you are not at home.
HOW DOES SMART ROOM THERMOSTAT WORKS?
HT 400 Smart Room Thermostat with its 0.1 measurement accuracy helps you to keep your living area temperature as you set. This
saves up to 30% on your bills by preventing the heating unit running unnecessarily.
WHAT ARE ADVANTAGES OF SMART ROOM THERMOSTAT?
Control your home temperature, wherever you are in the World by Smart Room Thermostat App with your mobile phone.
Create daily or weekly programs easily by your Smart Room Thermostat App.
Using Location Mode reduces the temperature of your home when you move away from home, or increases the temperature of
your home when you approach your home.
Depending on the date range selected from the smart room thermostat's mobile application, you can get a historical report of your
heating unit's working hours, the temperature of your home and the outside air temperature gracefully.
RULES TO BE CONSIDERED FOR SAFETY
1. Be sure to read the manual before using the device and its apparatus.
2. Opening, disassembly or use of the plastic parts of the product and apparatus other than the intended purpose is out of warranty.
3. Please note that the voltage of the outlet where you set up your device and apparatus is the recommended value in the user
manual.
4. Keep away your product and all apparatus from all kinds of foreign matter such as liquid, dust, heat etc.
5. Do not expose the device cables to any jamming or pressure. Pay attention to plugging in jacks and sockets as you can always
reach the power connections of the devices.
6. Disconnect the power supply to prevent damage to your device and apparatus during thunderstorms and lightning.
7. Disconnect the power supply if your device has not been used for a long period of time.
8. Your equipment and apparatus should be used with caution asinstructed in the user manual. In case of damages and malfunctions
because of external use, ask for help from services.
9. Contact our HT400 repair and maintenance service and other equipment or an authorized service center. Use appropriate tools
to repair and maintain products and equipment

TECHNICAL DATA
Room Thermostat Technical Data
Feeding Voltage
5V (DC)
Load Current
250 mA maximum
Dimensions
90mm / 45mm
Measurement Accuracy
0.1oC
Temperature Setting Accuracy
0.1oC –1.0oC
Working Accuracy
0.5oC
Operating Temperature
(-10oC) –(+50oC)
Storage Temperature
(-20oC) –(+60oC)
Modem Technical Data
Feeding Voltage
220V (AC)
Dimensions
85mm / 90mm / 28.5mm
Relay NO Switching Current
10A (220V AC)
Operating Temperature
(-10oC) –(+50oC)
Storage Temperature
(-20oC) –(+60oC)

HT 400 MODEM PLACEMENT
The important thing to note in the HT 400 modem placement is that avoiding physical contact with boiler and protecting against
materials such as liquid, dust etc. You can place your modem in boiler's cabinet without physical contact with boiler or mount modem
to wall by using Modem.
Connection Scheme
HT 400 MODEM SETUP
First, shut down electrical current which your boiler is connected (fuse, power outlet etc.)
Connect one of the boiler connection cable to HT 400 Modem as shown in the Connection Scheme.
Connect other boiler connection cable end to boiler's room thermostat input as shown in the boiler's user manual.
Input Modem AC cable frst to modem than to plug. If there is no plug near your boiler, you can connect AC cable to your boiler's
connection fuse.
After fnishing connections, turn on electrical current frst, then turn on your boiler.
If you want to deactivate your modem, press manual button then you should see orange light on modem. After being sure that
your boiler is working, press same button and see orange light disappeared.
Setup Room Thermostat to sync modem with room thermostat.

HT 400 ROOM THERMOSTAT
HT 400 ROOM THERMOSTAT PLACEMENT
Place your room thermostat in a room where you most use it as your living area. For example: living room. Avoid installing the room
thermostat where there is a lot of air circulation such as door entry or window edges. Also, do not place in places near heat units
(central heating system, fireplace, etc.) and places that receive direct sunlight. We recommend that the room thermostat be placed
at an altitude of 50 cm to 150 cm from the floor. You can try to place few places to find the most suitable place.

HT 400 ROOM THERMOSTAT SETUP
1. To start setup and mounting, first scan QR Code below via your smartphone. You can install
application to your smartphone with that code (You may need QR Code Reader App regarding to
your phone's model and brand) Note: To get further information about mounting and setup please
visit www.generallife.com.tr/kurulum/ht-400
2. Plug in adapter to HT400 and than wait for light to come on. After the light starts blinking purple, the
HT 400 smart setup will be ready.
3. You will receive confirmation mail after you completed signing up.
4. If you confirm the incoming mail, the application will automatically have directed to setup page.
5. Perform the instructions on the Setup page in order and complete setup.
6. When syncing the modem with the thermostat, be sure to press the sync button on the modem and
wait for the modem light to blink green. Push sync button on thermostat for 2 seconds. The modem
will alert you with sound and the light will be solid green. Now the room thermostat and the modem
are synced with each other.
MOBILE APP- MODS
With HT 400' s Home-Sleep-Outside-Program-Location and Manual mods, you can warm up as you want and you can save money.
Home Mode will fix temperature on set value. Recommended to use when you are at home. Suggested temperature value
is 23oC
Sleep Mode provides you comfy sleep with set temperature you desire. You can use this mode between 11 pm to 7 am
which is common sleeping hours.
Outside Mode is suggested to use when you are outside of your house for short or long time.
Program Mode allows you to program weekly as 30 minute time periods which will automatically change temperature in your
home with your program.
Location Mode reduces the temperature of your home when you move away from home, or increases the temperature of
your home when you approach your home.
Manual Mode allows you to set the degree to which you can determine the warmth of your home.
LED LIGHT COLOR EXPLANATIONS - MODEM
Fixed Green
Modem synced with thermostat and works properly.
Green Flashing
Pressed to Modem sync button and waiting for thermostat sync signal.
Red
Modem has energy but no thermostat synced.
Red Flashing
Boiler shut down because no signal from thermostat more than 22 minute.
Orange
On Manual Mode.
LED LIGHT COLOR EXPLANATIONS - ROOM THERMOSTAT
White
The device is turning on.
Yellow
Wi-Fi Module is turning on or modem syncing in progress.
Green
Wi-Fi turned on
Red
Wi-Fi Error
Purple Flashing
Access point is active.
Pink
Can't connect to Wi-Fi network.
Green Flashing
Waiting for modem sync.
Blue
Boiler is OFF
Orange
Boiler is ON
Blue Flashing
Boiler is OFF and no internet connection.
Orange Flashing
Boiler is ON and no internet connection.

Declaration of Conformity
Brand: mControl
Product Name: HT400
Product Type: Smart Room Thermostat
The product is connected wirelessly at 2.4 Ghzinternet and periodically shares the temperature and status information with the server
on the internet.
Compatible Directives:
Radio and Telecommunication Terminal Equipment Regulation 1999/5/AT (R&TTE EN 300 220-1 v2.3.1 & EN 300 328 v.1.7.1 2006-
10)
Electromagnetic Compatibility Regulation 2004/108/AT (EMC EN 301 489-1-3-17 v1.9.2)
Low Voltage Directive 2006/95/AT (LVD EN 60950-1:2006/A2:2013)
Supplementary Information: Mentioned product can be used with combi boilers with on / off output and compatibility with the directive
only covers the product. MIKOTERM is not responsible for the compliance of the entire system with the directive. This declaration
does not apply when changes are made to the product without obtaining our consent.
WARRANTY CONDITIONS
1. Warranty starts at the delivery date and warranted against manufacturing defect for 2 years.
2. Device is delivered to customers in operation. Mounting and other connections will be additional fee for service.
3. Devices will maintenance and repair in our factory and should send by contracted transportation company. For out services,
transportation and accommodation of service personnel are covered by customers. Overtime is added on service charge and is
received as cash proceeds.
4. Maintenance of devices and apparatus will be in our factory. For device maintenance, the round travel fares are covered by
customers.
5. If devices are malfunction in warranty duration, devices will be inspected in our factory to find out whose responsibility
(manufacturer or customer) and will announce to user by report.
6. Devices, which malfunctioned in warranty duration and found out it is responsibility of manufacturer, customer can demand new
product or repair which all costs will fulfilled by manufacturer regarding to cost is not higher than device.
7. After inspection of malfunction and detected that, it is customer's fault, repair cost of the device which still in warranty duration will
be customer's responsibility.
8. Customers should be aware of damages (if there is any) of product and warn manufacturer since the day warranty duration starts.
If customer do not warn manufacturer with knowledge of damage, customer lose the rights of article 6.
9. Devices and apparatus should be used as specified in User's Manual if not used as specified, products are out of warranty.
10.If products damaged, scratched or cracked by customer. The products will be out of warranty conditions.
11.Damages/Malfunctions because of using other brand' s and model' s devices and apparatus without knowledge of manufacturer
are out of warranty.
12.The arising depredation owing to working in humid and acidic places and result of rusting, oxidation is out of warranty.
13.The transport damage is out of warranty. Customers can take a transportation insurance.
14.Damages by virtue of grid voltage are out of warranty.
15.Damages because of force majeure like flood, earthquake, fire etc. are out of warranty.
16.All parts of the product are under warranty of our company.
17.If product breaks down and gets fixed in warranty duration, duration of maintenance adds to the warranty duration. Products
repairment can't exceed 20 work days. This duration starts when the product's problems are reported to the seller, agency,
producer or the importer if there is no service station. Consumer can report the problem by; fax, e-mail, registered and reply paid
letter or a similar way. If a conflict happens, the consumer has the responsibility of proofing it. If the problem can't be solved more
than 10 days the producer or importer has to supply a similar device until end of the reparation. If the product breaks down
because of material, label or mounting faults in the warranty duration, firm won't demand label costs, changing parts or any other
kind of charge for repairment.
18.Despite consumers rights of maintenance;
- If the product breaks down for 4 times in a year or 6 times in warranty duration and these problems effects main purpose of
the product. (starting from delivery time during warranty.),
- Exceeding the maximum repairing term,
- In the case of not existing service station, determining that repairment is not possible with the report compiled by respectively
service station's seller, dealer, agency, legation, importer or manufacturer.
19.Warranty document should be kept by customer until warranty duration is finished. If warranty is lost there will be no replacement.
All maintance and repair cost is responsibility of customer in case of warranty document lost.

MODEM WALL HANGER SCHEME