MD SPORTS BBG025 048M User manual

ATTENTION
Contact
MD Sports
Customer Service
DO NOT RETURN
TO THE STORE
* For additional resources and Frequently
Asked Questions, please visit us at
themdsports.com
MODEL: BBG025_048M
ASSEMBLY INSTRUCTIONS

www.themdsports.com
BBG025_048M 1
(Continued on the next page.)
NOTICE!
This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited warranty
period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer. The only exceptions
to the warranty include mainframes, table tops, playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental damage or
neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one State (province) to
another.
A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all requests for
warranty service, please feel free to contact our Consumer Service Department at:
WEBSITE: www.themdsports.com
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal Sports, can not handle
the product which is out of product’s limited warranty since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE
RETURNING THE PRODUCT TO THE STORE.
LIMITED 90 DAYS WARRANTY
STAPLE YOUR RECEIPT HERE
1 - Please leave your name, address, phone number, model number, parts needed on the answering machine if there is no attendant.
Failure to do so will result in a delay in shipping parts to you.
2 - Please review the replacement parts list and make sure that you have all of your parts before beginning assembly.

www.themdsports.com
BBG025_048M 2
(Continued on the next page.)
CAUTION!
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment..
1 - This product is intended for INDOOR use only.
2 - Please do not sit, climb, or lean on the product.
3 - Please do not drag the product when moving it in order to avoid damaging the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces of the product.
5 - This is not a child's toy, adult supervision is required for children playing this game.
WARNING:
Adult Assembly Required.
WARNING:
CHOKING HAZARD 
ASSEMBLY TIPS
IMPORTANT NOTICE!
No Children in
Assembly Area Keep away from pets
Do not use or keep product
outdoors. For indoor use only.
No wet/humid conditions.
1 - Please read the instructions carefully, and follow all assembly, operation and safety instructions properly in order to avoid
damage or injury. For the assembly, at least two adults are required.
2 - Some figures or drawings may not look exactly like your product. Please read and understand the text before beginning each
assembly step.

BBG025_048M PARTS LIST
BBG025_048M PRE-INSTALLED PARTS
Rim Net
P1 P2
x2
P3
Electronic
Scorer
x1
Rim with Paddle
x2
910 11 12
13 14 15 16
2 3 41
x6 x4 x2 x2
6 7 85
x4 x2 x2x2
18
Backboard
Straight
Connector
3 Way Connector Velcro
T Connector
x1
Ball Return Net
x1
Basketball
17
Tube - 1 Tube - 2 Tube - 3 Tube - 4
Tube - 7 Tube - 8Tube - 5 Tube - 6
Tube - 10
Air Pump
x1 x6 x6
x8 x9
x1
Tube - 9
x2
x4
www.themdsports.com
BBG025_048M 3
(Continued on the next page.)
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your product.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list pages.
Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
FOR FIG. 1, 5, 8 FOR FIG. 1 FOR FIG. 2 FOR FIG. 6
FOR FIG. 2 FOR FIG. 5 FOR FIG. 5 FOR FIG. 3
FOR FIG. 6 FOR FIG. 4 FOR FIG. 7 FOR FIG. 8
FOR FIG. 1, 4, 5 FOR FIG. 7, 9
FOR FIG. 1, 2, 6
FOR FIG. 9 FOR FIG. 9 FOR FIG. 9
FOR FIG. 3, 5
Needle
14

www.themdsports.com
BBG025_048M 4
(Continued on the next page.)
FIG. 1
FIG. 2
X 2
1
X 4
2
X 2
15
X 4
17
X 2
3
3
3
X 4
5
5
5
5
5
X 2
15 15
15
1
1
2
2
2
2
15
15
17
17
17
17

www.themdsports.com
BBG025_048M 5
(Continued on the next page.)
X 2
8
X 2
16
X 1
10
10
X 2
17
17
17
8
8
16
16
FIG. 3
FIG. 4

www.themdsports.com
BBG025_048M 6
(Continued on the next page.)
X 3
1
1
1
1
X 2
6
6
6
X 2
7
7
7
X 4
16
16
16
X 2
17
17 17
FIG. 5

www.themdsports.com
BBG025_048M 7
(Continued on the next page.)
X 2
4
X 2
9
X 2
15
FIG. 6
4
4
15
15
9
9

www.themdsports.com
BBG025_048M 8
(Continued on the next page.)
X 1
11
X 5
18
FIG. 7
FIG.7
3. Attach the Backboard (#11) to the Tubes using three Velcros (#18) as shown in FIG. 7 and 7A.
11
18

www.themdsports.com
BBG025_048M 9
(Continued on the next page.)
X 1
1
1
11
X 1
12
12
FIG. 8
Note: Slide velcro strap of Ball Return
Net (#12) to the mainframe
(pre-installed).
Note: Slide the Tube (#1) in
front of the Ball Return
Net (#12).
12
11
Back View
12
12
Connect Velcro
Strap here.
12