medemagroup MC 1124 User manual

2433-2007-Q ver. 1.0.0 - February 2019 GB
Quick guide MC 1124
medemagroup

Quick guide 2433-2007-Q 2 of 20 Version 1.0.0/2019
Medema Production A/S

Quick guide 2433-2007-Q 3 of 20 Version 1.0.0/2019
Medema Production A/S
Contents
Quick Guide - MC 1124..............................................................................4
Introduction................................................................................................4
Part names .................................................................................................5
Introduction CJSM1...................................................................................6
Designations - buttons..............................................................................6
Settings menu............................................................................................6
Set Time .................................................................................................6
Set Display Time ....................................................................................7
Set Distance ...........................................................................................8
Set Backlight ..........................................................................................9
Set Background......................................................................................9
Adjusting seat and footrest...................................................................10
Trouble shooting .....................................................................................12
Charging...............................................................................................13
Driving the MC 1124 ................................................................................14
10 tips for driving the MC 1124:............................................................15
Driving on public roads: .........................................................................16
Driving on stairs/escalators: .................................................................16
Brakes.......................................................................................................17
Motor braking: ......................................................................................17
Parking brake: ......................................................................................17
Disengagement: ...................................................................................17
Safety check.............................................................................................18
Serial number...........................................................................................18

Quick guide 2433-2007-Q 4 of 20 Version 1.0.0/2019
Medema Production A/S
Quick Guide - MC 1124
Introduction
Congratulations on your new MC 1124 electric mobility wheelchair. You are
now the owner of an electric mobility wheelchair developed for use indoors
as well as outdoors. It is what is called a Class B vehicle according to the
European standard EN 12184.
For optimum enjoyment of this vehicle - and to avoid breakdowns and accidents
- we recommend that you read the User Manual carefully. If you are a new user,
you should pay particular attention to the section “Driving the MC 1124”.
Note:
This Quick Guide is to be regarded as a supplement to the User Manual.
The information in the Quick Guide cannot, therefore, be expected to be
complete.
NB: Errors and omissions excepted. Specications subject to change.
We reserve the right to update this guide as required.
Warning!
The vehicle must not be lent to persons who are not completely familiar
with it.
The vehicle is designed for one person only.
Max. user weight 150 kg.
Medema A/S is not responsible for any damage or injuries caused by inap-
propriate or unsafe use of the MC 1124.

Quick guide 2433-2007-Q 5 of 20 Version 1.0.0/2019
Medema Production A/S
Part names
The part names given below refer to the descriptions later in the this guide.
Pivot wheel
Central
wheel
Anti-tilt wheel
Footplate or footrests
Charging socket
Serial number on
vehicle
Control panel Armrest
Joystick
Swing-away
release
Headrest
Automatic fuse
Adjusting the
headrest
Release for
leg supports
Leg length
adjustment
Eye for restraints
Pivot wheel
Disengagement
lever (both sides)
Eye for
restraints

Quick guide 2433-2007-Q 6 of 20 Version 1.0.0/2019
Medema Production A/S
Introduction CJSM1
CJSM1 is a full programmable module based controller system, that makes it
possible for the user to fully control movement and speed.
Designations - buttons
CJSM1
1 Start/stop-button
2 Indicator right
3 Function button
4Set up / change prole
5 Horn
6 Joystick
7 Speed decrease
8 Speed increase
9 Light
10 Indicator left
11 Warning LED
12 LCD screen
1
2
8
4
5
9
3
10
6
7
11
12
Settings menu
Set Time
The menu is accessed by depressing the Speed Down and Speed Up but-
tons simultaneously (Pos 7 and 8 in the table Designations - buttons).

Quick guide 2433-2007-Q 7 of 20 Version 1.0.0/2019
Medema Production A/S
A right joystick deection will enter a clock adjustment screen in which
further joystick deections are used to set the time.
Choose Exit to save and return to the main screen.
Set Display Time
Choose the menu Display
Time with the joystick. A
right joystick deection,
enter the menu.
The following possibilities
appears: 12hr, 24hr or OFF.
Deect the joystick to the
right /left to choose the
menu you want. Choose Exit

Quick guide 2433-2007-Q 8 of 20 Version 1.0.0/2019
Medema Production A/S
Set Distance
This sets the functionality of
the odometer and a screen
as below will appear.
Total Distance show the total
distance this chair has driven
with this Power module.
Trip Distance show the dis-
tance driven since last reset.
Select in this menu which
value to show on the main
screen.
The menu, Clear Trip Dis-
tance, resets the Trip dis-
tance to zero.
Exit - return to previous
menu.

Quick guide 2433-2007-Q 9 of 20 Version 1.0.0/2019
Medema Production A/S
Set Backlight
This sets the intensity of the
LCD backlight.
The adjustable range is 0% to
100% in steps of 10%. Adjust-
ments are made with left and
right joystick deections.
Set Background
The standard setting from the
factory is blue. But in bright
sunlight, the white background
can be better.
Options are: Blue, White,
Auto.
If the choice is blue, it means
that the background is blue in
all proles.
If the choice is white, it means that the background is white in all proles.
If the choice is auto the background is controlled by the parameter
Background, where the background can be set per prole a.e. Blue for
Indoor use, and White for outdoor prole.

Quick guide 2433-2007-Q 10 of 20 Version 1.0.0/2019
Medema Production A/S
Adjusting seat and footrest
Turn on the joystick and press the Function button (Mode) Use the joystick
left/right to select the function you want to adjust. Press the joystick up/
down to adjust.
Function Icon
Tilt  
Seatback angle  
Seat lift  
Left leg support  
Right leg support  
Footrests both  
Only the available settings will be displayed.

Quick guide 2433-2007-Q 11 of 20 Version 1.0.0/2019
Medema Production A/S
System lock
Locking the system
Press and hold the ON/OFF button down for four seconds while the system
is ON. Push the joystick forward until your hear a beep. Push the joystick
back until you hear a beep. Now the system is locked.
Unlock the system
Push the joystick forward until your hear a beep. Push the joystick back until
you hear a beep. Let go of the joystick. The system start in normal mode.

Quick guide 2433-2007-Q 12 of 20 Version 1.0.0/2019
Medema Production A/S
Trouble shooting
If a system trip occurs, you can nd out what has happened by counting
the number of LEDs on the battery gauge that are ashing.
Below is a list of self-help actions. Try to use this list before you contact
your service agent.
LED Meaning
1 LED The battery needs charging or there is a bad connection to the battery.
Check the connections to the battery. If the connections are good, try charg-
ing the battery.
2 LED The left hand motor has a bad connection. Check the connections to the left
hand motor.
3 LED The left hand motor has a short circuit to a battery connection. Contact your
service agent.
4 LED The right hand motor has a bad connection. Check the connections to the
right hand motor.
5 LED The right hand motor has a short circuit to a battery connection. Contact
your service agent.
6 LED The wheelchair is being prevented from driving by an external signal. The
exact cause will depend on the type of wheelchair you have.
7 LED A joystick fault is indicated. Make sure that the joystick is in the centre posi-
tion before switching on the control system.
8 LED A possible control system fault is indicated. Make sure that all connections
are secure.
9 LED The parking brakes have a bad connection. Check the parking brake and
motor connections. Make sure the control system connections are secure.
10 LED An excessive voltage has been applied to the control system. This is usually
caused by a poor battery connection. Check the battery connections.
7 LED+ S A communication fault is indicated. Make sure that the joystick cable is
securely connected and not damaged.

Quick guide 2433-2007-Q 13 of 20 Version 1.0.0/2019
Medema Production A/S
Charging
Charging
1 Plug the cable into the control box on the wheelchair
2 Plug the charger into the outlet or switch it on
3 Use the indicator lights on the charger to check that charging has started.
4When charging has nished, switch off or unplug the charger, and then remove the
charger cable from the control box.
You are recommended to charge the batteries every night after you have
used the wheelchair. (Further information in the User Manual)
Note:
If the batteries are damaged or are leaking, you should avoid touching them
because you may burn yourself.
Contact a qualied workshop immediately!
Old batteries must be delivered to an approved facility for safe disposal.
Further information in the User Manual.

Quick guide 2433-2007-Q 14 of 20 Version 1.0.0/2019
Medema Production A/S
Driving the MC 1124
Before getting on or off the vehicle, you must check the following:
A. That the wheelchair is switched off and that it is not disengaged.
B. That the wheelchair and the seat you are moving to are both stable.
C. Avoid placing your full body weight on the footrests. This may tip
the wheelchair forwards.
While driving, you must place your arms on the armrests and your feet on
the footrests.
Cables and leads must be xed using ties.
Never attempt to climb onto raised objects or kerbs higher than 7 cm, and
always approach changes of level head on, with the front and back wheels
moving in a straight line.
Warning!
The seat should NEVER be hoisted while driving on uneven surfaces,
slopes or up and down kerbs. The higher the seat is raised, the more un-
stable the chair becomes.
Note:
If your MC/vehicle is tted with a docking system from Dahl
Engineering, note that the clearance changes to
5.5 cm.
See the User Manual for details about driving on hills, inclines and declines,
and driving on public roads.

Quick guide 2433-2007-Q 15 of 20 Version 1.0.0/2019
Medema Production A/S
10 tips for driving the MC 1124:
• Reduce the speed when turning corners and also when going downhill.
• Reduce the speed when driving on inclines. Max. incline = 6° = 10%
• Reduce the speed when driving on a sideways incline.
Max. sideways incline = 6°
• Avoid parking on snow and ice.
• Always park on a level (at) surface.
• Avoid driving off-road.
• Avoid driving on icy surfaces, or smooth surfaces (for example snow or freshly
mown grass).
• Never attempt to climb kerbs higher than 7 cm. If the wheelchair has a docking
system, the clearance is reduced to 5,5 cm.
• Avoiding driving over kerbs diagonally. There is a risk of tipping over.
• Not to be used for towing other vehicles, etc.
Note:
Do not drive the MC 1124 when under the inuence. This applies to both
medicine and alcohol.

Quick guide 2433-2007-Q 16 of 20 Version 1.0.0/2019
Medema Production A/S
Driving on public roads:
When driving on public roads, footpaths, pedestrian streets, car parks,
shopping centres, etc. you must make sure you adjust your speed and
distance for other users. At 7 km/h you must follow the trafc rules applica-
ble to cyclists. This also means that your lights must be switched on during
lighting-up time. (Optional extra)
On footpaths, the maximum speed is 6 km/h. In this situation you are re-
garded as a pedestrian.
Note:
You should assume that other road users cannot see you while you are
sitting in the MC. So take great care and wait for the road to clear before
crossing.
Driving on stairs/escalators:
The wheelchair is not designed for use on stairs or escalators and any
attempt to do so may cause serious injury to yourself and others.

Quick guide 2433-2007-Q 17 of 20 Version 1.0.0/2019
Medema Production A/S
Brakes
The MC 1124 is equipped with two sets of brakes: The motor brake and the
parking brake.
Motor braking:
When you drive downhill, the control unit of the MC 1124 applies the motor
brake.
Parking brake:
When the vehicle is stationary and the joystick is not moved, a magnetic
brake is automatically applied to each drive unit. For driving, the magnetic
brake is released rst, after which the MC 1124 can be driven as described
above.
Note!
You must NEVER brake the MC 1124 by switching off with the I/O button
while moving, as this applies the magnetic brake with considerable force,
with a resulting risk of tipping.
Disengagement:
The MC 1124 is equipped with two disengagement levers: One on each
side of the vehicle.
ALWAYS disengage on both sides.
Warning!
When the wheelchair is disengaged, the braking system is deactivated. Be-
fore an occupant is left unattended or attempts to operate the wheelchair,
make sure that the disengagement handles are placed in (normal position
for driving), which means it’s connected (the chair can not be pushed).
You must NEVER disengage on sloping terrain. This can lead to serious
damage or personal injury.

Quick guide 2433-2007-Q 18 of 20 Version 1.0.0/2019
Medema Production A/S
Safety check
See the User Manual
Serial number
All wheelchairs have a serial number plate showing the year of production,
month and serial number. The same serial number can also be found on
the front of the User Manual.
Please quote the serial number when making inquiries about
servicing, spare parts, etc.
Normal position for driving - pushed
up
Position for disengagement -
pushed down

Quick guide 2433-2007-Q 19 of 20 Version 1.0.0/2019
Medema Production A/S

medemagroup