Mediacom Mobile Data 3G/4G HotSpot Specification sheet

Get started
All you need to know to get going
with your Mediacom Business
Mobile Data 3G/4G Hotspot.
Mobile Data 3G/4G HotSpot

Welcome!
©2014 Mediacom Communications Corporation. All Rights Reserved.
Mediacom Business is committed to developing technologies
that give you the ability to get what you want when you
want it, faster than ever before. This guide introduces you
to the basics of getting started with Mediacom Business and
your new Mobile Data 3G/4G Hotspot.

Install the Battery
Insert the battery into the opening on the bottom of the device.
Make sure the connectors align.
Slide the back cover into place until it clicks.
Charge the Battery
Plug the USB to Micro B cable into the device.
Plug the other end of the cable into the AC adapter and plug the
adapter into an electrical outlet.
Charge until the battery indicator meter is full ( ).
Get Ready
Make sure you are in an area covered by the Mediacom 3G or 4G
network (not roaming).
Make sure your computer’s Wi-Fi (wireless network connection)
mode is turned on.
Make sure your device is set up on your Mediacom Business
account.
Before You Start
©2014 Mediacom Communications Corporation. All Rights Reserved.

Power Up the Device
If the device is not powered on, press and hold the Power
button on top of the device for at least two seconds.
The device will automatically activate. You will see “Connect
your computer to Wi-Fi network” on the display screen when
it’s finished.
Get Connected
©2014 Mediacom Communications Corporation. All Rights Reserved.

After it’s activated, your Mobile Data 3G/4G Hotspot displays the
device name and password. You will need this information to
connect your Wi-Fi devices to the network.
1. From your computer, display the Wireless Network Connections
window, and then click View Wireless Networks.
2. Select the network name displayed on the device and click
Connect.
3. Enter your Wi-Fi password, which appeared on the device screen
when the device powered on. (To display the password again,
press the Power button briefly two times.)
4. Launch your computer’s Web browser. You will see the
Mediacom Business setup page.
5. Click The Internet or My 3G/4G Hotspot homepage to keep your
current device and network settings, or click Set Up My 3G/4G
Hotspot and follow the prompts to customize your setup.
6. Navigate to another Web page to confirm your connection.
7. Ensure that your device’s firmware is the most current. See
“Updates” in this guide’s Resources panel.
Wirelessly Connect Your Computer
©2014 Mediacom Communications Corporation. All Rights Reserved.

Get detailed instructions and download content
Online: business.mediacomcable.com/Mobile_Setup
From a Phone
Business Support Contact: 1-800-379-7412
Make a payment
Modify details of your Mediacom Business Service Plan
Manage Your Account
©2014 Mediacom Communications Corporation. All Rights Reserved.

What’s in the Box
1 Terms & Conditions and an Important Information booklet are accessible in electronic format on the device.
Device1
USB to
Micro B cable
AC charger
with USB port
Rechargeable
Battery
Get Started
Guide