TUYA QS-WIFI-S05 User manual

1 Gang Wi-Fi
Switch Module(BK)
QS-WIFI-S05(BK)
INSTRUCTION MANUAL
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with google home Voice control-work with Amazon Alexa Device Sharing
Apps
APP
Router Voice control Ordinary Switch
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
MANUAL OVERRIDE
The switch module terminal reserves the access of
manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
.margaid gniriw eht ot gnidrocca seriw tcennoC .2
.xob noitcnuj eht otni eludom eht tresnI .3
eludom hctiws wollof dna ylppus rewop eht no nruT .4
configuration instructions.
Notes: Take your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
Product type WIFI Switch Module
Voltage 100-240V AC
Max. load 2300W/250W for LED
Operation
frequency 2.4GHz - 2.4835GHz WIFI
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
.tcerroc si ppA ni deretne drowssap eht erus ekaM .d
e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch
module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
You can still control the device connected the switch
module with your traditional switch and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Fi network accordingly as per the App User Manual.
Q 5: How do I reset the device?
1. Switch on/off for 5 times until the indicator light
flash quickly.
2. Power on/off for 5 times until the indicator light
flash quickly.
Mounting Clip
S1
S1
L1
L1
L
N
L
L1
N
L1
S1
S1
L N
Indicator Light
with mounting clip without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Indicator Light
7.Install the air circuit breaker in front of the switch
module.

1 Gang Wi-Fi
Switch Module(BK)
QS-WIFI-S05(BK)
INSTRUCTION MANUAL
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with google home Voice control-work with Amazon Alexa Device Sharing
Apps
APP
Router Voice control Ordinary Switch
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
MANUAL OVERRIDE
The switch module terminal reserves the access of
manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
.margaid gniriw eht ot gnidrocca seriw tcennoC .2
.xob noitcnuj eht otni eludom eht tresnI .3
eludom hctiws wollof dna ylppus rewop eht no nruT .4
configuration instructions.
Notes: Take your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
Product type WIFI Switch Module
Voltage 100-240V AC
Max. load 2300W/250W for LED
Operation
frequency 2.4GHz - 2.4835GHz WIFI
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
.tcerroc si ppA ni deretne drowssap eht erus ekaM .d
e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch
module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
You can still control the device connected the switch
module with your traditional switch and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Fi network accordingly as per the App User Manual.
Q 5: How do I reset the device?
1. Switch on/off for 5 times until the indicator light
flash quickly.
2. Power on/off for 5 times until the indicator light
flash quickly.
Mounting Clip
S1
S1
L1
L1
L
N
L
L1
N
L1
S1
S1
L N
Indicator Light
with mounting clip without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Indicator Light
7.Install the air circuit breaker in front of the switch
module.

1 Gang Wi-Fi
Switch Module(BK)
QS-WIFI-S05(BK)
INSTRUCTION MANUAL
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with google home Voice control-work with Amazon Alexa Device Sharing
Apps
APP
Router Voice control Ordinary Switch
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
MANUAL OVERRIDE
The switch module terminal reserves the access of
manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
.margaid gniriw eht ot gnidrocca seriw tcennoC .2
.xob noitcnuj eht otni eludom eht tresnI .3
eludom hctiws wollof dna ylppus rewop eht no nruT .4
configuration instructions.
Notes: Take your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
Product type WIFI Switch Module
Voltage 100-240V AC
Max. load 2300W/250W for LED
Operation
frequency 2.4GHz - 2.4835GHz WIFI
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
.tcerroc si ppA ni deretne drowssap eht erus ekaM .d
e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch
module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
You can still control the device connected the switch
module with your traditional switch and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Fi network accordingly as per the App User Manual.
Q 5: How do I reset the device?
1. Switch on/off for 5 times until the indicator light
flash quickly.
2. Power on/off for 5 times until the indicator light
flash quickly.
Mounting Clip
S1
S1
L1
L1
L
N
L
L1
N
L1
S1
S1
L N
Indicator Light
with mounting clip without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Indicator Light
7.Install the air circuit breaker in front of the switch
module.

1 Gang Wi-Fi
Switch Module(BK)
QS-WIFI-S05(BK)
INSTRUCTION MANUAL
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with google home Voice control-work with Amazon Alexa Device Sharing
Apps
APP
Router Voice control Ordinary Switch
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
MANUAL OVERRIDE
The switch module terminal reserves the access of
manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
.margaid gniriw eht ot gnidrocca seriw tcennoC .2
.xob noitcnuj eht otni eludom eht tresnI .3
eludom hctiws wollof dna ylppus rewop eht no nruT .4
configuration instructions.
Notes: Take your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
Product type WIFI Switch Module
Voltage 100-240V AC
Max. load 2300W/250W for LED
Operation
frequency 2.4GHz - 2.4835GHz WIFI
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
.tcerroc si ppA ni deretne drowssap eht erus ekaM .d
e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch
module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
You can still control the device connected the switch
module with your traditional switch and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Fi network accordingly as per the App User Manual.
Q 5: How do I reset the device?
1. Switch on/off for 5 times until the indicator light
flash quickly.
2. Power on/off for 5 times until the indicator light
flash quickly.
Mounting Clip
S1
S1
L1
L1
L
N
L
L1
N
L1
S1
S1
L N
Indicator Light
with mounting clip without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Indicator Light
7.Install the air circuit breaker in front of the switch
module.

1 Gang Wi-Fi
Switch Module(BK)
QS-WIFI-S05(BK)
INSTRUCTION MANUAL
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with google home Voice control-work with Amazon Alexa Device Sharing
Apps
APP
Router Voice control Ordinary Switch
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
MANUAL OVERRIDE
The switch module terminal reserves the access of
manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
.margaid gniriw eht ot gnidrocca seriw tcennoC .2
.xob noitcnuj eht otni eludom eht tresnI .3
eludom hctiws wollof dna ylppus rewop eht no nruT .4
configuration instructions.
Notes: Take your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
Product type WIFI Switch Module
Voltage 100-240V AC
Max. load 2300W/250W for LED
Operation
frequency 2.4GHz - 2.4835GHz WIFI
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
.tcerroc si ppA ni deretne drowssap eht erus ekaM .d
e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch
module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
You can still control the device connected the switch
module with your traditional switch and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Fi network accordingly as per the App User Manual.
Q 5: How do I reset the device?
1. Switch on/off for 5 times until the indicator light
flash quickly.
2. Power on/off for 5 times until the indicator light
flash quickly.
Mounting Clip
S1
S1
L1
L1
L
N
L
L1
N
L1
S1
S1
L N
Indicator Light
with mounting clip without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Indicator Light
7.Install the air circuit breaker in front of the switch
module.

1 Gang Wi-Fi
Switch Module(BK)
QS-WIFI-S05(BK)
INSTRUCTION MANUAL
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with google home Voice control-work with Amazon Alexa Device Sharing
Apps
APP
Router Voice control Ordinary Switch
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
MANUAL OVERRIDE
The switch module terminal reserves the access of
manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
.margaid gniriw eht ot gnidrocca seriw tcennoC .2
.xob noitcnuj eht otni eludom eht tresnI .3
eludom hctiws wollof dna ylppus rewop eht no nruT .4
configuration instructions.
Notes: Take your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
Product type WIFI Switch Module
Voltage 100-240V AC
Max. load 2300W/250W for LED
Operation
frequency 2.4GHz - 2.4835GHz WIFI
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
.tcerroc si ppA ni deretne drowssap eht erus ekaM .d
e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch
module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
You can still control the device connected the switch
module with your traditional switch and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Fi network accordingly as per the App User Manual.
Q 5: How do I reset the device?
1. Switch on/off for 5 times until the indicator light
flash quickly.
2. Power on/off for 5 times until the indicator light
flash quickly.
Mounting Clip
S1
S1
L1
L1
L
N
L
L1
N
L1
S1
S1
L N
Indicator Light
with mounting clip without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Indicator Light
7.Install the air circuit breaker in front of the switch
module.

1 Gang Wi-Fi
Switch Module(BK)
QS-WIFI-S05(BK)
INSTRUCTION MANUAL
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with google home Voice control-work with Amazon Alexa Device Sharing
Apps
APP
Router Voice control Ordinary Switch
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
MANUAL OVERRIDE
The switch module terminal reserves the access of
manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
.margaid gniriw eht ot gnidrocca seriw tcennoC .2
.xob noitcnuj eht otni eludom eht tresnI .3
eludom hctiws wollof dna ylppus rewop eht no nruT .4
configuration instructions.
Notes: Take your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
Product type WIFI Switch Module
Voltage 100-240V AC
Max. load 2300W/250W for LED
Operation
frequency 2.4GHz - 2.4835GHz WIFI
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
.tcerroc si ppA ni deretne drowssap eht erus ekaM .d
e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch
module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
You can still control the device connected the switch
module with your traditional switch and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Fi network accordingly as per the App User Manual.
Q 5: How do I reset the device?
1. Switch on/off for 5 times until the indicator light
flash quickly.
2. Power on/off for 5 times until the indicator light
flash quickly.
Mounting Clip
S1
S1
L1
L1
L
N
L
L1
N
L1
S1
S1
L N
Indicator Light
with mounting clip without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Indicator Light
7.Install the air circuit breaker in front of the switch
module.

1 Gang Wi-Fi
Switch Module(BK)
QS-WIFI-S05(BK)
INSTRUCTION MANUAL
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with google home Voice control-work with Amazon Alexa Device Sharing
Apps
APP
Router Voice control Ordinary Switch
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
MANUAL OVERRIDE
The switch module terminal reserves the access of
manual override function for the end-user to switch on/off.
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
.margaid gniriw eht ot gnidrocca seriw tcennoC .2
.xob noitcnuj eht otni eludom eht tresnI .3
eludom hctiws wollof dna ylppus rewop eht no nruT .4
configuration instructions.
Notes: Take your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
TECHNICAL SPECIFICATIONS
Product type WIFI Switch Module
Voltage 100-240V AC
Max. load 2300W/250W for LED
Operation
frequency 2.4GHz - 2.4835GHz WIFI
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 46x46x18 mm
IP rating IP20
Warranty 2 years
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
.tcerroc si ppA ni deretne drowssap eht erus ekaM .d
e. Make sure the wiring is correct.
Q2: What device can be connected to this Wi-Fi switch
module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
You can still control the device connected the switch
module with your traditional switch and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You have to re-connect our Wi-Fi switch module to the
new Wi-Fi network accordingly as per the App User Manual.
Q 5: How do I reset the device?
1. Switch on/off for 5 times until the indicator light
flash quickly.
2. Power on/off for 5 times until the indicator light
flash quickly.
Mounting Clip
S1
S1
L1
L1
L
N
L
L1
N
L1
S1
S1
L N
Indicator Light
with mounting clip without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Indicator Light
7.Install the air circuit breaker in front of the switch
module.

Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open Bluetooth on Mobile phone first, then open
the App, selecting "+"on top right, you will see
"Devices to be added",click "Go to add".
Remark: If we don't open Bluetooth, the device
also can be searched, but it's slower.
Make sure your smart phone and Wi-Fi Switch
are under the same Wi-Fi network at 2.4GHz.
Choose the devices that need to be added, and
click "+" to next step, and then enter Wi-Fi and
password, finally confirm it.
The pairing usually will be finished soon. Pls make
your mobile phone and device as close as possible.
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI Switch
module E3S
Device added successfully
All Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
Apps control
APP
Obtain verification code
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
5 times (keep time interval not too short) until

Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open Bluetooth on Mobile phone first, then open
the App, selecting "+"on top right, you will see
"Devices to be added",click "Go to add".
Remark: If we don't open Bluetooth, the device
also can be searched, but it's slower.
Make sure your smart phone and Wi-Fi Switch
are under the same Wi-Fi network at 2.4GHz.
Choose the devices that need to be added, and
click "+" to next step, and then enter Wi-Fi and
password, finally confirm it.
The pairing usually will be finished soon. Pls make
your mobile phone and device as close as possible.
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI Switch
module E3S
Device added successfully
All Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
Apps control
APP
Obtain verification code
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
5 times (keep time interval not too short) until

Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open Bluetooth on Mobile phone first, then open
the App, selecting "+"on top right, you will see
"Devices to be added",click "Go to add".
Remark: If we don't open Bluetooth, the device
also can be searched, but it's slower.
Make sure your smart phone and Wi-Fi Switch
are under the same Wi-Fi network at 2.4GHz.
Choose the devices that need to be added, and
click "+" to next step, and then enter Wi-Fi and
password, finally confirm it.
The pairing usually will be finished soon. Pls make
your mobile phone and device as close as possible.
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI Switch
module E3S
Device added successfully
All Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
Apps control
APP
Obtain verification code
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
5 times (keep time interval not too short) until

Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open Bluetooth on Mobile phone first, then open
the App, selecting "+"on top right, you will see
"Devices to be added",click "Go to add".
Remark: If we don't open Bluetooth, the device
also can be searched, but it's slower.
Make sure your smart phone and Wi-Fi Switch
are under the same Wi-Fi network at 2.4GHz.
Choose the devices that need to be added, and
click "+" to next step, and then enter Wi-Fi and
password, finally confirm it.
The pairing usually will be finished soon. Pls make
your mobile phone and device as close as possible.
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI Switch
module E3S
Device added successfully
All Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
Apps control
APP
Obtain verification code
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
5 times (keep time interval not too short) until

Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open Bluetooth on Mobile phone first, then open
the App, selecting "+"on top right, you will see
"Devices to be added",click "Go to add".
Remark: If we don't open Bluetooth, the device
also can be searched, but it's slower.
Make sure your smart phone and Wi-Fi Switch
are under the same Wi-Fi network at 2.4GHz.
Choose the devices that need to be added, and
click "+" to next step, and then enter Wi-Fi and
password, finally confirm it.
The pairing usually will be finished soon. Pls make
your mobile phone and device as close as possible.
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI Switch
module E3S
Device added successfully
All Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
Apps control
APP
Obtain verification code
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
5 times (keep time interval not too short) until

Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open Bluetooth on Mobile phone first, then open
the App, selecting "+"on top right, you will see
"Devices to be added",click "Go to add".
Remark: If we don't open Bluetooth, the device
also can be searched, but it's slower.
Make sure your smart phone and Wi-Fi Switch
are under the same Wi-Fi network at 2.4GHz.
Choose the devices that need to be added, and
click "+" to next step, and then enter Wi-Fi and
password, finally confirm it.
The pairing usually will be finished soon. Pls make
your mobile phone and device as close as possible.
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI Switch
module E3S
Device added successfully
All Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
Apps control
APP
Obtain verification code
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
5 times (keep time interval not too short) until

Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open Bluetooth on Mobile phone first, then open
the App, selecting "+"on top right, you will see
"Devices to be added",click "Go to add".
Remark: If we don't open Bluetooth, the device
also can be searched, but it's slower.
Make sure your smart phone and Wi-Fi Switch
are under the same Wi-Fi network at 2.4GHz.
Choose the devices that need to be added, and
click "+" to next step, and then enter Wi-Fi and
password, finally confirm it.
The pairing usually will be finished soon. Pls make
your mobile phone and device as close as possible.
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI Switch
module E3S
Device added successfully
All Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
Apps control
APP
Obtain verification code
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
5 times (keep time interval not too short) until

Log in or register your account with your mobile
code sent to your mobile or mail box, then set your
login password. Click "Create Family" to enter into
the APP.
Mobile number/e-mail address
Region
Open Bluetooth on Mobile phone first, then open
the App, selecting "+"on top right, you will see
"Devices to be added",click "Go to add".
Remark: If we don't open Bluetooth, the device
also can be searched, but it's slower.
Make sure your smart phone and Wi-Fi Switch
are under the same Wi-Fi network at 2.4GHz.
Choose the devices that need to be added, and
click "+" to next step, and then enter Wi-Fi and
password, finally confirm it.
The pairing usually will be finished soon. Pls make
your mobile phone and device as close as possible.
When pairing is done, the Wi-Fi switch will be
shown on the App.
WI-FI Switch
module E3S
Device added successfully
All Device
Connect to amazon alexa or Google Assistant
for voice control, or share the devices with your
families or friends.
More
Device name
Basic information about the device
Supported Third-party
Control Others
Others
Shared devices
Create Group
Device information
Feedback
Device Location
Check network
amazon
alexa Google Assistant
Enjoy your smart life of home automation for
lighting control by using our All-in-one mobile
app wherever you are in the world or simply by
voice control when you are sitting at home
comfortably.
Voice control
Apps control
APP
Obtain verification code
After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
5 times (keep time interval not too short) until