Medion LIFE X17576 User manual

MEDION®LIFE®X17576 (MD 31575)
Ultra HD LCD Smart-TV
User Manual

2
Contents
1. Information about these operating instructions............................................................... 4
1.1. Explanation of symbols .........................................................................................................................4
1.2. Proper use...................................................................................................................................................5
2. Package contents.................................................................................................................. 5
3. Safety instructions ............................................................................................................... 6
3.1. Operating safety.......................................................................................................................................6
3.2. Set-up location ........................................................................................................................................7
3.3. Repairs .........................................................................................................................................................8
3.4. Environmental temperature ................................................................................................................8
3.5. Safety when connecting .......................................................................................................................8
3.6. Handling batteries...................................................................................................................................9
4. EU - Declaration of conformity .......................................................................................... 10
4.1. Information on WLAN.......................................................................................................................... 10
5. Device overview.................................................................................................................. 11
5.1. Front .......................................................................................................................................................... 11
5.2. Rear ............................................................................................................................................................ 12
5.3. Remote control...................................................................................................................................... 13
6. Getting started ................................................................................................................... 15
6.1. Unpacking ............................................................................................................................................... 15
6.2. Mounting ................................................................................................................................................ 15
6.3. Inserting the batteries in the remote control.............................................................................15
6.4. Connecting the antenna .................................................................................................................... 16
6.5. Common Interface (CI)........................................................................................................................16
6.6. Connecting the power supply ......................................................................................................... 16
6.7. Switching the Smart TV on and off................................................................................................. 16
6.8. Channel search after switching on for the first time................................................................ 17
6.9. Using the multimedia connections................................................................................................ 22
7. Operation ............................................................................................................................ 24
7.1. Channel selection ................................................................................................................................. 24
7.2. Sound settings....................................................................................................................................... 24
7.3. Screen settings....................................................................................................................................... 24
7.4. Displaying channel information......................................................................................................25
7.5. Opening the favourites list................................................................................................................25
7.6. Selecting the source ............................................................................................................................26
8. Teletext................................................................................................................................ 28
8.1. Using the teletext ................................................................................................................................. 28
8.2. Selecting a page.................................................................................................................................... 28
8.3. Useful teletext functions.................................................................................................................... 29
9. Menu navigation................................................................................................................. 29
9.1. Channel menu........................................................................................................................................ 30
9.2. Picture menu .......................................................................................................................................... 36
9.3. Sound menu ........................................................................................................................................... 37
9.4. Network menu....................................................................................................................................... 38
9.5. Settings menu........................................................................................................................................ 39
9.6. Lock menu............................................................................................................................................... 42
9.7. Time menu .............................................................................................................................................. 43
9.8. PVR recording ........................................................................................................................................ 44
9.9. Channel list.............................................................................................................................................. 45

3
10. Media player ....................................................................................................................... 46
10.1. Accessing the media player ..............................................................................................................46
10.2. Main menu for the media player..................................................................................................... 46
10.3. Displaying photos................................................................................................................................. 47
10.4. Playing back music............................................................................................................................... 47
10.5. Playing back videos.............................................................................................................................. 48
11. EPG: Programme Guide...................................................................................................... 49
12. Data protection MEDION® Smart TV ................................................................................. 50
13. Troubleshooting ................................................................................................................. 51
13.1. Do you need more help?.................................................................................................................... 52
13.2. Smart TV pixel faults ............................................................................................................................53
14. Cleaning .............................................................................................................................. 54
15. Storage when not in use.....................................................................................................54
16. Disposal............................................................................................................................... 55
17. Technical specifications ..................................................................................................... 56
18. Product data sheet ............................................................................................................. 57
19. Service information............................................................................................................ 58
20. Legal Notice ........................................................................................................................ 58
21. Privacy statement............................................................................................................... 59
22. Index.................................................................................................................................... 60

4
1. Information about these operating instructions
Thank you for choosing our product. We hope you enjoy using it.
Read the safety instructions carefully before using the device for the first time. Note the
warnings on the device and in the operating instructions.
Always keep the operating instructions close to hand. If you sell the device or give it away, please
ensure that you also pass on these operating instructions. They are an essential component of the
product.
1.1. Explanation of symbols
If a block of text is marked with one of the warning symbols listed below, the hazard described in
that text must be avoided to prevent the potential consequences described there from occurring.
DANGER!
Warning of immediate mortal danger!
WARNING!
Warning of possible risk of fatal injury and/or serious irreversible injuries!
CAUTION!
Warning: risk of minor or moderate injuries!
NOTICE!
Please follow the instructions to avoid property damage!
Additional information on using the device!
NOTICE!
Please follow the instructions in the operating instructions!
WARNING!
Warning of risk of electric shock!
WARNING!
Warning: danger due to loud volume!
• Bullet point/information on steps during operation
Instructions to be carried out
Declaration of conformity (see section “Declaration of conformity”): Products that fea-
ture this symbol meet the requirements of the EC directives.

5
Safety class II
Electrical appliances in protection class II are electrical appliances that permanently have
double or reinforced insulation and do not have any connection options for a protective
earth. The housing of an electrical appliance in protection class II that is enclosed in insu-
lated material can partially or fully act as the additional or reinforced insulation.
1.2. Proper use
This is an information technology device and is also suitable for multimedia applications. This de-
vice is used to receive and play back television programmes. The range of different connections
supplied makes it possible to expand the input and output sources (receiver, DVD player, DVD re-
corder, video recorder, PC, etc.). Your device offers a number of options for usage.
The device is intended for private use only and not for industrial/commercial use.
• Please note that we shall not be liable for damage caused by improper use.
• Do not modify the device without our consent and do not use any auxiliary equipment that we
have not approved or supplied.
• Use only spare parts and accessories that we have supplied or approved.
• Heed all the information in these operating instructions, especially the safety information. Any
other use is deemed improper and can cause personal injury or property damage.
• Do not use the device in extreme environmental conditions.
• This device is intended for use in dry, indoor areas only.
• This device is not designed to be used as a data monitor for office workplaces.
2. Package contents
Please check your purchase to ensure that all items are included. If anything is missing, contact us
within 14 days of purchase.
The following items are supplied with your product:
• Ultra HD-TV
• Remote control (RC1821) including 2 batteries (1.5 V AAA)
• YUV adaptor
• AV adaptor
• Feet including screws
• Documentation
DANGER!
Risk of choking and suffocation!
Packaging film can be swallowed or used improperly, creating a risk of choking and
suffocation.
Keep packaging material such as plastic film or plastic bags away from children.

6
3. Safety instructions
3.1. Operating safety
– Check the device for damage before using it for the first time. A defective or damaged
device must not be placed into operation.
– This device may be used by children over the age of 8 and by persons with reduced
physical, sensory or mental abilities or by those without experience and knowledge, if
they are supervised or have been instructed in the safe use of the device and have un-
derstood the dangers that result from it.
– Children must not be allowed to play with the device. Cleaning and user maintenance
must not be carried out by children unless they are supervised.
DANGER!
Risk of suffocation!
Packing material is not a toy! Packaging film can be swallowed or used improperly.
Therefore, there is a risk of suffocation!
Keep packaging material such as plastic film or plastic bags away from children.
WARNING!
Risk of electric shock!
Risk of electric shock, short circuit and fire!
Never open the housing of the smart TV and never insert any objects through
the slots and openings into your smart TV.
WARNING!
Overheating! Risk of fire!
Overheating can damage your smart TV and lead to a risk of fire!
The slots and openings on the TV are for ventilation purposes. Do not cover the-
se openings e.g. with newspapers, table cloths, curtains, etc.
– Do not put any pressure on the display. There is a risk that the glass on the screen may
break.
– The universal remote control has a class 1 infrared diode. Never use optical devices to
look at the LED.
CAUTION!
Risk of injury!
There is a risk of injury if the display is broken!
To avoid damaging the display, do not touch it with fingers or sharp objects.
Pick up the shattered pieces wearing protective gloves.
Then wash your hands with soap because chemicals may have leaked out.
Send the broken parts to your Service Centre for professional disposal.
– Disconnect the device from the mains network immediately in the event of an emer-
gency and only use it again when it has been checked by a qualified person or cus-
tomer services. Emergency situations include e.g. when smoke or unusual noises are
coming from the device, water has penetrated into it or the mains cable or housing is
damaged.

7
Contact customer services if:
– The power cable is burnt or damaged
– Liquid has penetrated the device
– The device is not operating correctly
– The device has fallen, or the housing is damaged
– Smoke is rising from the device
3.2. Set-up location
– In the first few hours of use, new devices can give off a typical, unavoidable but totally
harmless smell which wears off with time. We recommend that you ventilate the room
at regular intervals to counteract the smell.
We have taken appropriate measures during
the development of this device to ensure that levels
are significantly below legal limits.
– Keep your smart TV and all connected appliances away from moisture and avoid dust,
heat and direct sunlight. Non-compliance with these instructions can lead to faults or
damage to the smart TV.
– Do not use the device outdoors as it could be damaged by rain, snow, etc.
– The device must not be exposed to dripping or sprayed water. Do not place vessels
filled with liquid (vases or similar) on or in the vicinity of the device. The container may
tip over and the liquid may impair the electrical safety of the product.
NOTICE!
Risk of damage!
There is a risk of injury with candles and other open flames.
Keep candles and other open flames away from this device at all times in order
to prevent the spread of fire.
– Make sure that there is enough clearance from the sides of the furniture unit. Ensure a
minimum clearance of 10 cm around the device for sufficient ventilation.
– Avoid dazzle, reflections and strong bright-dark contrast in order to protect your eyes.
– The optimal viewing distance is 3 times the screen diagonal.
DANGER!
Risk of injury! Mortal danger!
Only set up your TV on a stable surface. Televisions that tip over could cause seri-
ous injuries or death. Lots of injuries, especially to children, can be avoided by ob-
serving the following safety precautions.
Operate all components on a stable, level and vibration-free base, to prevent the
smart TV from falling over.
Only use the stand and screws supplied with the TV.
– Only use furniture that guarantees the safe use of the TV.
– Ensure that the TV does not hang over the edges of the furniture.
– Do not place the TV on higher or high furniture such as wall cabinets or shelves with-
out ensuring that both the furniture and the TV are safely and securely held in place.
– In order to guarantee the stability of the TV, do not place any sheets or similar under it.

8
– Advise children of the dangers of climbing up furniture in order to reach the TV or its
operating elements.
If you are storing or moving the TV, also observe the aforementioned safety instructions.
3.3. Repairs
– Repairs to your smart TV should only be carried out by qualified specialists.
– If a repair must be carried out, please only contact our authorised service partner.
– Make sure that only replacement parts provided by the manufacturer are used. The
use of unsuitable replacement parts may damage the device and lead to a risk of fire.
3.4. Environmental temperature
– The device can be operated at an ambient temperature of +5°C to +35°C with a rela-
tive humidity of 20% - 85% (non-condensing).
– When switched off, the smart TV can be stored at temperatures from -20°C to +60°C.
– Keep the product at least one metre away from sources of high-frequency and mag-
netic interference (television set, loudspeakers, mobile telephones, etc.) in order to
avoid malfunctions.
– During thunderstorms or if the device is not going to be used for long periods, remove
the plug from the socket and the aerial cable from the aerial socket.
NOTICE!
Risk of damage!
Large changes in temperature or fluctuations in humidity can cause moisture to
build up due to condensation within the smart TV, which can cause an electrical
short circuit.
After transporting the smart TV, wait until the appliance has reached ambient
temperature before switching it on.
3.5. Safety when connecting
3.5.1. Power supply
– Even when deactivated, some components of the device are live. To disconnect the
power from your smart TV or to completely isolate the device from voltage sources,
disconnect the device completely from the mains network. Disconnect the mains plug
from the mains socket for this purpose.
DANGER!
Risk of electric shock!
There is a risk of death due to an electric shock when the housing is open!
Do not open the housing of the device. It does not contain any parts requiring
maintenance.
– Only plug the smart TV into earthed 100 - 240 V ~ 50/60 Hz sockets. Contact your elec-
tricity provider if you are not sure if the socket is earthed or not.
– The socket must always be easily accessible so that the mains plug can be quickly dis-
connected from the socket in the event of an emergency.
– To disconnect the power supply to your TV, disconnect the mains plug from the mains
socket.
– For extra safety, we recommend using an over-voltage protection device to prevent
your smart TV sustaining damage as a result of power surges or lightning strikes.
– Position the cables so that they cannot be stepped on or tripped over.

9
– Do not place any objects on the cables as they may be damaged.
– Do not touch the plug with wet hands.
– Always hold the plug by its housing and never pull it out of the socket using the cable.
– Please note that the TV also continues to consume power in standby mode (see here
the power consumption in standby mode in the section “Product data sheet”).
If the device shuts down and restarts due to an electrostatic discharge while in USB
mode (media player), optional HbbTV mode or optional LAN/WiFi operation (media
player/portal), it will not be able to independently restore the last operating mode.
Please restart the respective media or applications.
The last user settings you entered may not be restored following an electrostatic di-
scharge that causes the TV to shut down because these settings are only saved 5
minutes after switching channels.
All multimedia devices, which are connected to the corresponding ports of the TV,
must comply with the requirements of the Low Voltage Directive.
3.6. Handling batteries
WARNING!
Risk of explosion!
Batteries may contain combustible materials and leak, heat up excessively, ignite or
even explode.
Avoid improper handling of the batteries to prevent damage to your device and
your health.
Please follow the safety advice below closely:
– Keep batteries away from children.
If batteries are swallowed, consult a doctor immediately.
– Never charge batteries (unless they are designed to be recharged).
– Never empty the batteries by means of high power output.
– Never short-circuit the batteries.
– Never expose the batteries to excessive heat, such as sunlight, fire or similar sources of
heat!
– Do not dismantle or deform the batteries.
You could injure your hands or fingers, or battery fluid could come into contact with
your eyes or skin. If this happens, rinse the affected areas with plenty of clean water
and consult a doctor immediately.
– Avoid heavy impacts and vibrations.
– Always observe the correct polarity.
– Make sure that the plus (+) and minus (−) poles are correctly inserted to avoid short circuits.
– Do not mix up new and old batteries or different types of batteries.
This could cause your device to malfunction. In addition, the weaker batteries would dis-
charge too much.
– Remove spent batteries from the device immediately.
– Remove the batteries from the device if you do not intend to use it for a long period of time.
– Replace all of the old batteries in a device with new batteries of the same type.
– Cover the contacts of the batteries with sticky tape if you want to store or dispose of them.
– If necessary, clean the battery and device contacts before insertion.
– If the batteries have leaked, wear protective gloves and clean the contacts thoroughly.

10
4. EU - Declaration of conformity
MEDION AG hereby declares that this product conforms with the essential requirements and the re-
maining relevant regulations:
• RE Directive 2014/53/EU
• Ecodesign Directive 2009/125/EC
• RoHS Directive 2011/65/EU
You can download the complete EU Declaration of Conformity from www.medion.com/conformity.
4.1. Information on WLAN
WLAN
Frequency range 2,4 GHz
Wi-Fi standard 802.11 b/g/n
Encryption WPA2
Frequency range/MHz Channel Max. transmission power/dBm
2400 – 2483,5 1 - 13 18,9

11
5. Device overview
5.1. Front
2
4
3
1
5
2
4
76
1) SOURCE: Change the input source
2) CH+/CH: Select a program or navigate in the menu
3) : Standby button: Switch the device on or into standby mode
4) VOL+/VOL: Set the volume or navigate in the menu
5) MENU: Call up the on-screen menu to make settings on your device
6) LCD screen
7) Operating light: Shines red when the device is in standby mode.
Shines blue when the device is switched on.
Infrared sensor: Reception field for the infrared remote control signals.

12
5.2. Rear
Headphone
out
SPDIF
OPTICAL OUT
Common Interface
MINI YPbPr MINI AV
HDMI3
ARC/CEC
RF
LNB IN
DC 13V/18V
400mA Max. USB 1(2.0)
DC 5V
Max. 500mA
USB 2/3(2.0)
DC 5V
Max. 500mA
HDMI2
CEC
HDMI1
CEC
PC
AUDIO
LAN
RJ-45 PC SCART
1
2
4
3
5
6
17
7
16 15 14 13 12 11
8
9
10
1) USB2/32.0 DC 5V , Max. 500mA: USB port for connecting an external storage medium
for playing back media/PVR recording
2) SPDIF OPTICAL OUT: Digital audio output (optical)
3) COMMON INTERFACE CI+: Card slot for connecting pay TV cards
4) HEADPHONE OUT: For connecting headphones with 3.5 mm jack
5) MINI AV: Audio/video input (via the supplied cinch adaptor)
6) MINI YPBPR: YPbPr components input (via the supplied cinch adaptor)
7) USB12.0 DC 5V , Max. 500mA:
USB port for connecting an external storage medium
for playing back media/PVR recording
8) RF: Antenna connection (DVB-T/DVB-T2 HD/DVB-C/analogue)
9) LNB IN DC 13V/18V 400mA Max.: For connecting the antenna (satellite)
10) HDMI3 ARC/CEC: HDMI connection for devices with HDMI output (HDMI 3 can be used for
ARC/CEC)
11) SCART: SCART connection for devices with SCART output (analogue)
12) PC AUDIO: Audio socket for PC sound playback
13) PC: Socket for connecting a PC
14) HDMI2 CEC: HDMI connection for devices with HDMI output (HDMI 2 can be used for CEC)
15) HDMI1 CEC: HDMI connection for devices with HDMI output (HDMI 1 can be used for CEC)
16) LAN RJ45: Network connection for smart functions
17) Fixing holes for a wall mount

13
5.3. Remote control
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
17
16
18
19
20
21
22
23
24
25
26
27
1 Mute
2Number but-
tons
TV: Channel selection, videotext: Page selection
3Set previous TV programme.
4Media por-
tals
Direct links to the media portals
YOUTUBE YouTube link
TOON GOOGLE No function
FOXXUM Link to MEDION portal
NETFLIX Netflix link
5SOURCE Select input signal of connected devices.
6Direction
buttons
Move up in menu.
Video text: Select the next page.
Move down in menu.
Video text: Select the previous page.

14
Move left in menu.
Video text: Call up subpage.
Move right in menu.
Video text: Call up subpage.
OK Confirm selection in certain menus. Also used to open the channel list.
7EXIT Exit the menu
8INFO For displaying information such as the current programme number and im-
age format.
EPG Electronic television and radio programme guide (broadcaster-specific).
9CH-/+ Programme selection buttons
10  Start/pause playback
TIMESHIFT TV mode: Start/play timeshift recording
11 Next track/next chapter
HOLD Video text: Stop multiple pages
12 Fast forward
REVEAL Video text: Display hidden text.
13 SIZE Change picture format
Video text: Press once to enlarge top half
Press twice to enlarge bottom half
14 SUBPAGE Video text: Open subpage
15 INDEX Open PVR recording list; video text: Call up main page
16 SUBTITLE DTV/satellite/media browser: Subtitle function
17 I/II AUDIO Set the normal sound format to stereo or mono
18 /RECORD Start PVR recording
19 Colour but-
tons
RED Intended for use in certain menus.
GREEN Intended for use in certain menus.
YELLOW Intended for use in certain menus.
BLUE Intended for use in certain menus.
20 Stop playback
FAV. Call up favourites list
21 Rewind
CANCEL Video text: Hide text
22 Previous track/previous chapter
TTX Open/close video text
23 VOL-/+ Increase (+) or decrease (−) volume.
24 RETURN Move back one step in the menu
25 MENU Open and close menu.
26 CH.LIST Open channel list
27 POWER: i.e. switch Smart TV on/off (switch standby mode on/off).

15
6. Getting started
Before using for the first time, ensure you read the“Safety instructions”section.
6.1. Unpacking
• Select a suitable place for setting up the device before unpacking.
• Open the box very carefully, to avoid damaging the device. The device might get damaged if you
use a knife with a long blade to open the box.
• Completely remove the packaging material.
• The box contains a number of small items (including batteries). Keep these out of the reach of
children, as they represent a choking hazard.
• Store the packaging material in a safe place. Only use this box to transport the TV.
DANGER!
Risk of choking and suffocation!
Packaging film can be swallowed or used improperly, creating a risk of choking and
suffocation.
Keep packaging material such as plastic film or plastic bags away from children.
6.2. Mounting
Attach the stand as shown in the illustration. Carry out this step before connecting the Smart TV.
4 x M5 x 14
6.3. Inserting the batteries in the remote control
Remove the battery compartment cover on the back of the remote control.
Insert two LR03 (AAA) 1.5 V batteries in the battery compartment of the remote control. Check
the battery polarity (see label on the bottom of the battery compartment).
Close the battery compartment.
NOTICE!
Risk of damage!
The remote control can be damaged by leaking batteries if not used for a long pe-
riod of time!
Remove the batteries from the remote control if the device is not going to be
used for a long period.

16
6.4. Connecting the antenna
Your smart TV supports different antenna signals. You can input the following image signals to the
television through the socket labelled RF:
• Via analogue cable/an analogue house aerial
• Via a DVB-T/DVB-T21antenna or
• Via a DVB-C1connection
Insert the antenna cable either from the house aerial/analogue cable connection, a DVB-T anten-
na or the DVB-C connection in the antenna socket on the Smart TV.
You also have the option of connecting a digital satellite system to the socket labelled LNB IN.
Screw a coaxial antenna cable’s F connector onto the connector on the Smart TV.
If you want to watch encrypted channels, or subscription channels, you must use a suita-
ble card. Insert a CAM module (available in specialist shops) in the slot provided for this pur-
pose on the left-hand side of the device (COMMON INTERFACE). You can then insert your
provider’s card in the CAM module.
6.5. Common Interface (CI)
If you want to watch subscription channels, you must first register with the channel provider. You
will receive a Conditional Access Module (CAM module) and a special card from your provider after
registration. You will find information about the settings in the documentation supplied with the
module.
Install the CI components on your television in the following way:
First insert the CAM module in the slot on the side of the Smart TV. Then insert the card.
Connect the television to the power supply, switch it on, and wait for a moment until the card is
recognised.
Please note that you can only insert or remove the CI module when the device is in STAND-
BY mode, or has been disconnected from the mains power.
The CAM module must be inserted correctly: it cannot be inserted if it is the wrong way
round. The CAM module or the television could be damaged if you attempt to insert the
CAM module by force.
6.6. Connecting the power supply
Connect the mains plug on the device to an easily accessible 220 to 240 V ~ 50 Hz mains socket.
6.7. Switching the Smart TV on and off
The device will be in standby mode as soon as you have connected the mains plug to the mains
socket.
To switch on the device, press
– on the remote control: the standby/on button ;
– on the device: the button.
Use the Standby/On button on the remote control to switch the device back into standby
mode. The device will be switched off, but will continue to use power.
If the device is not receiving an input signal, it will automatically switch to standby mode
after five minutes. A countdown timer will be displayed on the screen until this time. This
function is not available for all sources.
1This service must be available in your region

17
6.8. Channel search after switching on for the first time
You will be guided through the FIRST TIME I NSTALLATION after you switch on the device for the first
time.
Welcome! Please use a few seconds to setup your Smart TV!
Français
Deutsch
English
Italiano
Español
Português
Next >
Please select a language for your menu.
Dansk
Nederlands Magyar
Slovenščina Slovenský
Use the buttons to select the language.
After confirming the selected language with OK, confirm the NEXT option by pressing the OK
button.
Then you will be prompted to accept the Smart TV data protection information. This is necessary
if you intend to make use of the network/Internet services. Read the data protection information
carefully. Use  to select the individual points and press OK to confirm, where applica-
ble.
Welcome! Please use a few seconds to setup your Smart TV!
Russia
Poland
Norway
Rumania
Italy
Portugal
Netherlands
Luxembourg
Next >
Select your country, please.
Arabia
Switzerland
Sweden
New Zealand
Serbia
UK
Spain
Slovenia
< Back Quit
Select the desired country using . The country setting will influence the order in which
the channels are stored. In addition, there are a number of options preset for the individual
countries.
After confirming the selected country with OK, confirm the NEXT option by pressing the OK but-
ton.
Welcome! Please use a few seconds to setup your Smart TV!
London GMT
Canary GMT
Next >
Select your timezone, please.
Berlin GMT+1
< Back Quit
Amsterdam GMT+1
Lisbon GMT
Bratislava GMT+1
Beograd GMT+1
Dublin GMT
Brussels GMT+1
Select the desired time zone using .
After confirming the selected country with OK, confirm the NEXT option by pressing the OK but-
ton.

18
Welcome! Please use a few seconds to setup your Smart TV!
Network Setup
Next >
Connecting your TV to the internet will let you use great services like
< Back Quit
Skip
Netflix, Medion Portal, movies, etc.
Then use  to select the option NETWORK SETUP if you want to connect to the Internet.
Otherwise, select the SKIP option.
6.8.1. Network settings
Welcome! Please use a few seconds to setup your Smart TV!
LAN
Next >
Select the network scan type.
< Back Quit
Wifi
Select the desired network connection type LAN or WIFI.
After confirming the selection with OK, confirm the SKIP option by pressing the OK button.
LAN
Under IP CONFIGURATION, you can select the TYPE of LAN connection (DHCP or STATIC). Select
STATIC if you want to manually set the IP, SUBNET MASK, GATEWAY and DNS1/2 options.
Then select CONNECT and confirm with OK. The network connection will then be established. The
message CONNECT OK appears. Then press the EXIT button to move to the next setup point of
the initial installation.
Wifi
All available networks are then displayed under the BASE STATION option. Select a network using
the  direction buttons and press OK.
Enter the required password using the virtual keyboard, then select the return key and confirm
with OK.
Then confirm the CONNECT option with OK. The network connection is now established. The
message CONNECT OK appears. Then press the EXIT button to move to the next setup point of
the initial installation.
If you do not want to establish a network connection during the initial installation, you
can do this at any time in the menu under NETWORK.
If you wish, you can now set up your Netflix account. If you do not have a Netflix account or want
to set it up later, select SKIP to go to the next setup point of the initial installation. Select CONFIG
URE NETFLIX and confirm with OK if you want to set up the account.
Once the installation is complete, you can return to the initial installation by pressing the EXIT
button. Then select SKIP to go to the next setup point of the initial installation.

19
Welcome! Please use a few seconds to setup your Smart TV!
Antenna
Next >
Select your antenna mode, please.
< Back Quit
Satellite
Cable
Select the desired antenna connection ANTENNA, CABLE or SATELLITE.
After confirming the selection with OK, confirm the NEXT option by pressing the OK button.
6.8.2. Aerial
Select the antenna connection ANTENNA.
After confirming the selection with OK, confirm the NEXT option by pressing the OK button.
A prompt appears. Select YES and confirm with OK. The search will then start.
6.8.3. Cable
Menu option Setting
SEARCH Start the station search
TUNING MODE
This is where you set the search mode. If you have selected NETWORK,
only the frequencies that are enabled are searched for programmes. If
you have selected FULL the entire frequency band is searched. However,
this search will take longer.
FREQUENZ
(only in DVB-C mode)
Set the frequency. Standard stetting is AUTO.
Only active if the NETWORK option has been selected in search mode.
MODULATION
(only in DVB-C mode)
Set the modulation. Standard stetting is AUTO.
Only active if the NETWORK option has been selected in search mode.
SYMBOL
(only in DVB-C mode)
Set the baud rate.
Standard stetting is AUTO.
Only active if the NETWORK option has been selected in search mode.
NETWORK ID
(only in DVB-C mode)
Set the network ID. Standard stetting is AUTO.
Only active if the NETWORK option has been selected in search mode.
Once you have made the settings, select the SEARCH option and confirm with OK.
A prompt appears. Select YES and confirm with OK. The search will then start.

20
6.8.4. Satellite
Setting
SATELLITE
Use  to select the satellite for which you want to change the settings or carry
out a search, and then confirm with OK.
EDIT
If desired, press the yellow button to edit the selected satellite.
LONGITUDE
DIRECTION
Use the direction buttons  to select the orbit position WEST or
EAST.
LONGITUDE
ANGLE Use the number buttons to enter the angle.
BAND Select the frequency band KU or C.
RENAME
Press the red button to change the name of the satellite. Press the
arrow buttons to select the character you require. Press OK to save
the new name.
ADD
Press the red button to add a new satellite. The setting options are the same here as
under EDIT.
DELETE
Select the satellite that you want to delete from the list and press the green but-
ton. Confirm the prompt by pressing YES.
TRANSPONDER
Select the transponder for which you want to change the settings or for which
you want to start the search.
EDIT
If desired, press the yellow button to edit the selected transponder.
FREQUEN
CY Use the number buttons to enter the frequency.
SYMBOL Use the number buttons to enter the Baud rate.
POLARI
ZATION Press  to select the polarity.
LÖSCHEN
Select the transponder that you want to delete from the list as described above
and press the green button. Confirm the prompt by pressing YES.
ADD
Press the red button to add a new transponder. The setting options here are the
same as for EDIT.
LNB POWER Set the LNB power here.
LNB TYPE Enter the oscillator frequency for your LNB type here. The default setting is UNI
VERSAL.
22KHZ TONE Set the sound here. The default setting is AUTO.
TONEBURST If your satellite system requires a tone burst, you can set it to BURST A or B here.
DISEQC 1.0/1.1 If you have connected multiple LNBs or a DiSEqC switch to your satellite aerial,
set the LNB you require here.
MOTOR If your satellite antenna is controlled by a motor, press  to select the DiSEqC
version. Press the OK button to define the position of the antenna.
UNICABLE
The following UNICABLE settings can be made here.
SLOT This is where you specify a particular channel.
FREQUEN
CY You can set the centre frequency here.
PIN You can set the satellite position here.
LNB Select the LNB here.
VERIFY Press the OK button to accept the settings.