Medion P13132 (md 21009) User manual

21009 Aldi ES+DE+EN Final Cover.FH11 Mon Nov 08 10:39:43 2010 Seite 2

Schwarz

C M Y CM MY CY CMY K

V/12/10

47 cm / 18,5" Design LCD-TV

with integrated D DVB-T tuner and

DVD-player

MEDION

LIFE

® P13132 (MD 21009)

Instruction manua

Medion Service Center

Visonic S.A.

c/ Miguel Faraday, 6

Parque Em resarial "La Car etania", N-IV Km. 13

E-28906 Getafe, Madrid

Es aña

Hotline: 902196437

Fax: 914604772

service-s [email protected]

www.medion.es

English - 1 -

Contents

Features ................................................................. 2

Introduction............................................................. 2

Preparation............................................................. 2

Safety Precautions ................................................. 2

Package Contents.................................................. 4

Remote Control Buttons......................................... 5

LCD TV and Operating Buttons.............................. 6

Viewing the Connections – Back Connectors......... 6

Viewing the Connections - Side Connectors.......... 7

Aerial Connection................................................... 8

Using Digital Multimedia Connectors...................... 8

USB Memory Connection...................................8

Connecting the LCD TV to a PC............................. 8

Using Side AV Connectors ..................................... 8

Connecting to a DVD Player via HDMI................... 9

Connecting to a DVD Player via Component

Sockets (YPbPr) or Scart Cable............................. 9

Remote Control Handset........................................ 9

Inserting Batteries............................................... 9

Switching On/Off................................................... 10

To Switch the TV On.........................................10

To Switch the TV Off......................................... 10

Input Selection...................................................... 10

Basic Operations.................................................. 10

Operation with the Buttons of the TV................ 10

Volume Setting.............................................. 10

Programme Selection ................................... 10

AV Mode ....................................................... 10

Operation with the Remote Control..................10

Volume Setting.............................................. 10

Programme Selection (Previous or Next

Programme).................................................. 10

Programme Selection (Direct Access).......... 10

Viewing Electronic Programme Guide (EPG)........11

First Time Installation............................................ 12

Installation ............................................................ 12

Automatic Channel Scan (Retune) Menu

Operation.......................................................... 13

Manual Tuning ..................................................... 13

Digital Manual Search.......................................13

Analogue Manual Search.................................13

Analogue Fine Tune.......................................... 13

Clear Service List (*)......................................... 13

Managing Stations: Channel List.......................... 13

Operating the Channel List...............................14

Moving a Channel............................................. 14

Deleting a Channel........................................... 14

Renaming a Channel........................................14

Locking a Channel............................................14

Managing Stations: Favourites............................. 14

Button Functions............................................... 14

Managing Stations: Sorting Channel List ............. 15

On-Screen Information......................................... 15

Media Playback Using Media Browser................. 15

Viewing Photos via USB...................................16

Media Browser Settings.................................... 16

Changing Image Size: Picture Formats................ 17

Conﬁguring Picture Settings................................. 18

Operating Picture Settings Menu Items............18

Picture Settings Menu Items............................. 18

PC Picture Settings...........................................18

Conﬁguring Sound Settings.................................. 19

Operating Sound Settings Menu Items............. 19

Sound Settings Menu Items..............................19

Conﬁguring Your TV’s Settings............................. 19

Operating Settings Menu Items........................ 19

Settings Menu Items.........................................19

Using a Conditional Access Module..................... 20

Viewing ConditionalAccess Menu (*)............... 20

Conﬁguring Language Preferences...................... 20

Language Settings............................................ 21

Parental Control.................................................... 21

Parental Settings Menu Operation ...................21

Timers................................................................... 22

Setting Sleep Timer .......................................... 22

Setting Programme Timers............................... 22

Adding a Timer.............................................. 22

Editing a Timer.............................................. 22

Deleting a Timer............................................ 22

Conﬁguring Date/Time Settings............................ 22

Conﬁguring Source Settings................................. 23

Conﬁguring Other Settings................................... 23

Operation.......................................................... 23

Other Features ..................................................... 24

Teletext................................................................. 24

Tips....................................................................... 24

Appendix A: PC Input Typical Display Modes....... 25

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types).............................................. 25

Appendix C: Supported DVI Resolutions..............26

Appendix D: Supported File Formats for USB

Mode..................................................................... 26

Appendix E: Software Upgrade............................ 27

Speciﬁcations ....................................................... 28

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 101_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1 10.11.2010 11:40:4010.11.2010 11:40:40

English - 2 -

Features

Remote controlled colour LCD TV.• Fully integrated Terrestrial digital TV (DVB-T - MPEG2-• MPEG4)

HDMI connectors for digital video and audio. This• connectionisalsodesigned toaccept highdeﬁnition

signals.

USB input.• 1000 programmes (analogue+digital).• OSD menu system.• Integrated tuner MPEG 2, MPEG 4 compatible.• Scart socket for external devices (such as video,• video games, audio set, etc.).

Stereo sound system. (German+Nicam)• Teletext, fastext, TOP text.• Headphone connection.• Automatic programming system.• Forward or backward manual tuning.• Sleep timer / Child lock.• Automatic sound mute when no transmission.• NTSC playback.• AVL (Automatic Volume Limiting).• Auto power down.• PLL (Frequency Search).• PC input.• Plug&Play for Windows 98, ME, 2000, XP, Vista,• Windos 7.

Game Mode•

Introduction

Please read the corresponding instructions of this

handbook prior to the ﬁrst usage of the device, even

when the usage of electronic devices is familiar

to you. Notice especially the chapter SAFETY

PRECAUTIONS. Carefully keep the handbook as

future reference. When selling the device or giving it

away, absolutely give these direction for use.

Thank you for choosing this product. This manual will

guide youfor the properoperation of yourTV.

Before operating the TV, please read this

manual thoroughly. Please do keep this

manual in a safe place for future references.

This device is intended to receive and display TV

programs. The different connection options make

an additional expansion of the reception and display

sourcespossible(receiver,DVDplayer,DVDrecorder,

VCR, PC etc.). This device is only suitable for the

operation in dry interiors. This appliance is intended

solely for private domestic use and may not be used

for industrial and commercial purposes. We exclude

liability in principle, if the device is not used as

intended, or unauthorized modiﬁcations have been

made. To operate your LCD TV in extreme ambient

conditions may cause the damage of the device.

Preparation

For ventilation, leave a free space of at least 10 cm

all around the set. To prevent any fault and unsafe

situations, please do not place any objects on top of

the set. Use this device in moderate climates.

10 cm

Safety Precautions

Read the following recommended safety

precautions carefully for your safety.

Power Source

TheTVset shouldbe operated onlyfrom a 220-240 V

AC, 50 Hz outlet. Ensure that you select the correct

voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on the

power cord (mains lead) or pinch the cord. Handle the

power cord by the plug. Do not unplug the appliance by

pulling from the power cord and never touch the power

cordwithwethandsasthiscouldcauseashortcircuitor

electricshock.Nevermakeaknotinthecordortieitwith

othercords.Thepowercordsshouldbeplacedinsucha

waythattheyarenotlikelytobesteppedon.Adamaged

powercord can causeﬁreor giveyou anelectric shock.

When itis damagedand needsto be replaced,it should

be done by qualiﬁed personnel.

Moisture and Water

Do not use this device in a humid and

damp place (avoid the bathroom, the

sinkinthekitchen, andnearthewashing

machine). Do not expose this device to

rain or water, as this may be dangerous

and do not place objects filled with

liquids, such as ﬂower vases, on top.

Avoid from dripping or splashing.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 201_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 2 10.11.2010 11:40:4110.11.2010 11:40:41

English - 3 -

Ifany solid objector liquidfalls intothecabinet, unplug

the TV and have it checked by qualiﬁed personnel

before operating it any further.

Cleaning

Before cleaning, unplug the TV set

from the wall outlet. Do not use liquid

or aerosol cleaners. Use soft and dry

cloth.

Ventilation

Theslots and openings on theTVset are intendedfor

ventilationandto ensurereliableoperation.Toprevent

overheating, these openings must not be blocked or

covered in anyway.

Heat and Flames

The set should not be placed near to

open ﬂames and sources of intense heat

such as an electric heater. Ensure that

no open ﬂame sources, such as lighted

candles,are placed ontop of theTV. Batteries should

not be exposed to excessive heat such as sunshine,

ﬁre or the like.

Lightning

In case of storm and lightning or when

going on holiday, disconnect the power

cord from the wall outlet.

Replacement Parts

Whenreplacement partsare required,make surethat

the service technician has used replacement parts,

which are speciﬁed by the manufacturer or have the

samespeciﬁcations asthe originalone. Unauthorized

substitutions may result in ﬁre, electrical shock or

other hazards.

Servicing

Please refer all servicing to qualiﬁed

personnel. Do not remove the cover

yourselfas this mayresult in anelectric

shock

Waste Disposal

Instructions for waste disposal:•

Packaging and packaging aids are recyclable and

should principally be recycled. Packaging materials,

such as foil bag, must be kept away from children.

Batteries,including thosewhich areheavy metal-free,

should not be disposed of with household waste.

Please dispose of used battery in an environment

friendly manner. Find out about the legal regulations

which apply in your area.

Don’ttry to rechargebatteries. Dangerof explosion.• Replace batteries only with the same or equivalent

type.

Thissymbol onthe productor onits packagingmeans

that your electrical and electronic device

should be disposed at the end of its

service life separately from your

household wastes. There are separate

collection systems for recycling in EU.

Formore information, pleasecontact the

local authority or the dealer where you

purchased the product.

Disconnecting the Device

The mains plug is used to disconnect TV set from

the mains and therefore it must remain readily

operable..

Headphone Volume

Excessivesound pressure fromearphones

and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely

attachedto thewall inaccordance withthe installation

instructions when mounted to the wall (if the option

is available).

LCD Screen

TheLCD panel isa very hightechnology product with

about a million thin ﬁlm transistors, giving you ﬁne

picture details. Occasionally, a few non-active pixels

may appear on the screen as a ﬁxed blue, green or

red point. Please note that this does not affect the

performance of your product.

Warning!Donot leaveyourTVin standbyor operating

mode when you leave your house.

Connection to a Television Distribution

System (Cable TV etc.) from Tuner

Devices connected to the protective earthing of the

building installation through the mains connection or

throughotherapparatuswithaconnectiontoprotective

earthing-and to a television distribution system using

coaxial cable, may in some circumstances create a

ﬁre hazard.

Connection to a cable distribution system has

therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11).

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 301_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 3 10.11.2010 11:40:4110.11.2010 11:40:41

English - 4 -

The Standby Off/On button doesn´t separate this

device completely from mains. Moreover the device

consumespower in thestandby operation. Inorder to

separatethe devicecompletelyfrom mains,the mains

plughas to bepulled fromthe mains socket.Because

of that the device should be set up in a way, that an

unobstructed access to mains socket is guaranteed,

so that in case of emergency the mains plug can be

pulled immediately. To exclude the danger of ﬁre, the

power cord should principally be separated from the

mains socket prior to a longer period of non-usage,

i.e. during vacations.

Electrical device not in the hands of children

Neverlet children use electrical deviceunsupervised.

Children can´t always recognize properly the

possible dangers. Batteries / accumulators can be

life threatening when swallowed. Store batteries

unreachable for small children. In case of swallowing

a battery medical aid has to be sought immediately.

Also keep the packaging foils away from children.

There is danger of suffocation.

Licence Notiﬁcation (optional)

Manufactured under license from Dolby

Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

Package Contents

INFO

EPG

FAV

PRESETS

SUBTITLE

RETURN

SOURCE

SLEEP SCREEN

LANG.

Remote Control

LCD TV

Batteries: 2 X AAA

Instruction Book

1 X Video &Audio Connection Cable

Note: You should check the accessories after purchasing.

Make sure that each accessory is included.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 401_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 4 10.11.2010 11:40:4110.11.2010 11:40:41

English - 5 -

Remote Control Buttons

Standby1. Image size/ Expand (in TXT mode)2. Sleep timer3. Numeric buttons4. Return / Exit (in DTV mode) / Index page (in5. TXT mode)

Cursor up / Page up (in TXT mode)6. Cursor left7. Programme up (Page down in DTV mode)8. Programme down (Page up in DTV mode)9. Mono-Stereo / Dual I-II / Current language10. Previous Programme / Swap11. Electronic programme guide12. Info / Reveal (in TXT mode)13. Picture mode selection14. Source selection15. Red button / Zooms videos (in Media Browser16. video mode)

Green button17. Yellow button18. Menu on-off19. Blue button20. OK / Edit Channel list / Hold (in TXT mode)21. Cursor right / Subpage (in TXT mode)22. Cursor down / Page down (in TXT mode)23. Volume up24. Volume down25. Mute26. Teletext / Mix27. Subtitle on-off (in DTV mode) / TXT Subtitle28. FAV (*) (Favourite Selection) (in DTV mode)29. No Function30. Media Browser playback buttons. (in DTV31. mode)

(*) Only for EU country options.

Note: Buttons that are not indicated with a

number on the remote control illustration are

not functional in TV mode.

INFO

EPG

FAV

PRESETS

SUBTITLE

RETURN

SOURCE

SLEEP SCREEN

LANG.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 501_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 5 10.11.2010 11:40:4310.11.2010 11:40:43

English - 6 -

LCD TV and Operating Buttons

FRONT and REAR VIEW Control buttons VIEW Control Buttons

1. Standby Off/On button

2. TV/AV button

3. Programme Up/Down buttons-

Volume Up/Down buttons

Note:You can use +/- buttons

to change volume. If you want

to change channels, press P/V/

AV button once and then use

+/- buttons. If you hold the P/V/

AV button about a few seconds,

source OSD will be displayed.

Main menu OSD cannot be

displayed via control buttons.

Viewing the Connections – Back Connectors

HDMI 1

SPDIF

Coax.OUT

HDMI 1: HDMI Input1. HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of

displaying High Deﬁnition pictures from devices such as a High Deﬁnition Satellite Receiver or DVD

Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets

can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI

connection.

RF Input2. connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device

to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

SCART3. input or output for external devices. Connect the SCART cable between SCART socket on TV and

SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch toAV mode.

Note: S-VHS signal is supported via the scart socket.

PC Input4. is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

Note: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input.

SPDIF Coaxial Out5. outputs digital audio signals of the currently watched source.

Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 601_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 6 10.11.2010 11:40:4410.11.2010 11:40:44

English - 7 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels1. that you subscribe to. For more information, see “Conditional Access” section.

Side USB input.2. TV control buttons.3. Side audio-video connection4. input is used for connecting video and audio signals

of external devices. To make a video connection, you must use the suppliedAV

connection cable for enabling connection. First, plug singular jack of the cable to the

TV’s SideAV socket. Afterwards, insert your video cable’s (not supplied) connector

into the YELLOW input (located on the plural side) of the suppliedAV connection

cable. Colours of the connected jacks should match.

To enable audio connection, you must use RED and WHITE inputs of the side AV

connection cable. Afterwards, insert your device’s audio cable’s connectors into

the RED and WHITE jack of the supplied side AV connection cable. Colours of the

connected jacks should match.

Note: You should use audio inputs of side AV connection cable (RED & WHITE)

to enable sound connection when connecting a device to your TV by using PC or

COMPONENT VIDEO input.

Headphone jack is used for connecting an external headphone to the system.5. Connect to the HEADPHONE jack to listen to the TV from headphones (optional).

Hardpower switch6. is used for turning the TV on or off.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 701_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 7 10.11.2010 11:40:4510.11.2010 11:40:45

English - 8 -

Aerial Connection

Connect the aerial ,cable TV plug to the AERIAL• INPUT socket located at the rear of the TV.

HDMI 1

SPDIF

Coax.OUT

Using Digital Multimedia

Connectors

You can connect USB devices to your TV by using• the USB input of the TV. This feature allows you to

display/play JPG, MP3 and video ﬁles stored in a

USB stick.

It is possible that certain types of USB devices (e.g.• MP3 Players) may not be compatible with this TV.

You may back up your ﬁles before making any• connections to the TV set in order to avoid any

possible data loss. Note that manufacturer will not

be responsible for any ﬁle damage or data loss.

Do not pull out USB module while playing a ﬁle.•

CAUTION: Quickly plugging and unplugging USB

devices, is avery hazardous operation. Especially,

do not repeatedly quickly plug and unplug the

drive. This maycause physical damage tothe USB

player and especially the USB device itself.

SIDE VIEW USB MEMORY

5Vdc

Max:500mA

USB

USB Memory Connection

IMPORTANT: The TV should be switched off while

plugging or unplugging a USB device. Plug your

USB devices to the USB input of the TV. You can

connect a usb device to your TV by using the USB

input of the TV.

Note: It is possible certain types of hard disk drives

are not supported.

Connecting the LCD TV to a

Fordisplaying your computer’sscreen imageon your

LCDTV,youcan connectyourcomputer totheTVset.

Power off both computer and display before making

any connections. Use 15-pin D-sub display cable to

connect a PC to the LCD TV. When the connection

is made, switch to PC source. See “Input selection”

section. Set the resolution that suits your viewing

requirements. Resolution information can be found

in the appendix parts

PC Input

(back)

Side AV Input

PC VGA Cable

(Not supplied)

PC Audio Cable

(Not supplied)

Side Audio/Video

Connection Cable

(Supplied)

SIDE AV

Using Side AV Connectors

You can connect a range of optional equipment to your

LCD TV using side connectors of the TV.

For connecting a camcorder or camera , you should• use AV socket (side). To do this, you must use the

suppliedvideo/audio connection cable. First,plug

single jack of the cable to the TV’s AV IN socket

(side). Afterwards, insert your camera cable’s (not

supplied)connectorsinto thepluralpart ofthevideo/

audio connection cable.Colours of theconnected

jacks should match. See illustration below.

Afterwards,youshouldswitchto• SideAVsource.See

the section Input selection in the following sections

for more information.

Camera

AV Connection

Cable (supplied)

AV Cable

(not supplied)

Headphone

SIDE AV

To listen the TV sound from headphones, you• should connect headphones to your TV by using the

HEADPHONE jack as illustrated above.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 801_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 8 10.11.2010 11:40:4710.11.2010 11:40:47

English - 9 -

HDMI 1

SPDIF

Coax.OUT

Scart Cable

(not supplied)

External device

Note• :Thesethreemethodsofconnectionperformthe

same function but in different levels of quality. It is not

necessary to connect by all three methods.

Remote Control Handset

Inserting Batteries

Remove the battery cover located on the back of• the handset by gently pulling backwards from the

indicated part.

Insert two• AAA/R3 or equivalent type batteries

inside. Observe the correct polarity (+/-) when

inserting batteries and replace the battery cover.

Note: Remove the battery from remote control

handset when it is not to be used for a long period.

Otherwise it can be damaged due to any leakage of

batteries. Remote range is approximately 7m/23ft.

Connecting to a DVD Player via

HDMI

Please refer to your DVD player’s instruction book

foradditional information.Power offboth theTVand

the device before making any connections.

Note: Not all cables shown in the illustration are

supplied.

If your DVD player has an• HDMI socket, you can

connect via HDMI for better video and audio quality.

HDMI 1

SPDIF

Coax.OUT

External device

(not supplied)

HDMI Cable

WhenyouconnecttoDVDplayerasillustratedabove,• switch to the connected HDMI source. See, Input

Selection section for more information on changing

sources.

Connecting to a DVD Player via

Component Sockets (YPbPr) or

Scart Cable

Some DVD players are connected through• COMPONENT SOCKETS (YPbPr). YPbPr can be

used only when you connect a device that has a

YPbPr output through the PC input with YPbPr to

PC cable (YPbPr cable is not supplied).

When the connection is made, switch to YPbPr• source. See, “Input selection” section.

To enable audio connection, use the• VGA/

Component Audio cable. First, plug single jack

of the cable to the TV. Afterwards, insert your DVD

player’saudiocable’sconnectors intothe plural part

of the VGA/Component audio connection cable

(see illustration below). Colours of the connected

jacks should match ( RED & WHITE).

AV Connection

Cable (supplied)

Audio Cable

(not supplied)

To DVD Player's

Audio Outputs.

SIDE AV

Whentheconnectionismade,switchto• YPbPrsource.

See, Input selection section.

You may also connect through the• SCART input.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 901_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 9 10.11.2010 11:40:4710.11.2010 11:40:47

English - 10 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240VAC 50 Hz.•

Switch the “• ” button to position “|” so the TV

will switch to standby mode. Then the standby LED

lights up.

To switch on the TV from standby mode either:•

Press the “• ” button, P+ / P- or a numeric button on

the remote control.

Pressthe• -P/CHorP/CH+ touchbuttonontheTV.The

TV will then switch on.

Note: If you switch on your TV via PROGRAMME UP/

DOWN buttons on the remote control or on the TV

set, the programme that you were watching last will be

reselected.

By either method the TV will switch on.

To Switch the TV Off

Switch the “• ” button to position 2 as illustrated,(

) so the TV will switch off.

To power down the TV completely, unplug the• power cord from the mains socket.

Note: When the TV is switched to standby mode,

standby LED can blink to indicate that features such

as Standby Search, Over Air Download or Timer is

active

Input Selection

Once you have connected external systems to

your TV, you can switch to different input sources.

Press “SOURCE” button on your remote control

consecutively for directly changing sources.

Note: YPbPr mode can be used only when you

connecta device thathas aYPbPr output through the

PC input with YPbPr to PC cable (not supplied).

Basic Operations

You can operate your TV using both the remote

control and onset buttons.

Operation with the Buttons of the TV

Main menu OSD cannot be displayed via control

buttons.“+/-”buttons will functionas volume up/down

as default. Even if you set other functions for these

buttons, “+/-” buttons will perform as default after a

short while.

Volume Setting

Press “• +/-” buttons to increase or decrease volume,

so a volume level scale (slider) will be displayed on

the screen.

Programme Selection

Press• P/V/AV buttononceand thenuse “+/-”buttons

to select the next or previous programme.

AV Mode

Hold the “• P/V/AV” button, source OSD will be

displayed.

Use “• +/-” buttons to select the desired source.

Operation with the Remote Control

Theremote control ofyourTV is designedto control• all the functions of the model you selected. The

functions will be described in accordance with the

menu system of your TV.

Volume Setting

Press“• V+”button toincrease thevolume. Press“V-”

buttonto decreasethe volume.Avolume levelscale

(slider) will be displayed on the screen.

Programme Selection (Previous or Next

Programme)

Press “• P -” button to select the previous

programme.

Press “• P +” button to select the next programme.

Programme Selection (Direct Access)

Pressnumericbuttonsontheremotecontroltoselect• programmes between 0 and 9. The TV will switch

to the selected programme. To select programmes

between, press the numeric buttons consecutively.

When the pressing time is due for the second

numeric button, only the ﬁrst digit programme will

bedisplayed. Press directlytheprogramme number

to reselect single digit programmes.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1001_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 10 10.11.2010 11:40:4810.11.2010 11:40:48

English - 11 -

Viewing Electronic Programme

Guide (EPG)

You can view the electronic programme guide (EPG)

to view information about available programmes.To

view the EPG menu please press EPG button on the

remote control.

Press “• ”/“ ” buttons to navigate through channels.

Press “• ”/“ ” buttons to navigate through the

programme list.

EPG menu displays available information on all• channels.

Please note that event information is updated• automatically. If there are no event information

data available for channels, EPG will be displayed

with blanks.

OK (Options): Displaysprogramme optionsincluding

“Select Channel” option.

INFO (Event Details): Displays the programmes in

detail.

Green button: Programme schedule will be listed

Yellow button: Display EPG data in accordane with

timeline schedule

Blue button (Filter): Views ﬁltering options.

Red button (Prev Time Slice): Displays the

programmes of previous time slice.

Green button (Next Time Slice): Displays the

programmes of the next time slice.

Yellow button (Prev Day): Displays the programmes

of previous day.

Blue button (Next day): Displays the programmes

of the next day.

Numeric buttons (Jump): Jumps to the preferred

channel directly via numeric buttons.

OK (Options): Displaysprogramme optionsincluding

“Select Channel” option.

Text button (Filter): Views ﬁltering options.

INFO (Details): Displays the programmes in detail.

Red button (Prev Day): Displays the programmes

of previous day.

Green button (Next day): Displays the programmes

of the next day.

Yellow button (Zoom): Expands programme

information.

Blue button (Filter): Views ﬁltering options.

INFO (Details): Displays the programmes in detail.

Numeric buttons (Jump): Jumps to the preferred

channel directly via numeric buttons.

OK (Options): Displaysprogramme optionsincluding

“Select Channel” option.

Text (Search): Displays “Guide Search” menu.

SUBTTL: Press SUBTITLE button to view Select

Genre menu. Using this feature, you can search the

programme guide database in accordance with the

genre. Info available in the programme guide will

be searched and results matching your criteria will

be listed.

(Now) : Shows the current programme.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1101_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 11 10.11.2010 11:40:4810.11.2010 11:40:48

English - 12 -

First Time Installation

IMPORTANT: Ensure that the aerial is connected

before switching on the TV for the first time

installation.

WhentheTVisoperated fortheﬁrsttime, installation• wizard will guide you through the process. First,

language selection screen will be displayed:

Use “• ” or “ ” buttons to select your language

and press OK button to set selected language and

continue.

Afterselectingthe language,“• Welcome!”screen will

be displayed, requiring you to set Country,Teletext

Language and Scan Encrypted options.

By pressing “• ” or “ ” button, select the country

you want to set and press “ ” button to highlight

Teletext Language option. Use “ ” or “ ” button

to select desired Teletext Language.

Press “• ” button after setting Teletext Language

option. Scan Encrypted will be then highlighted.

You can set Scan Encrypted as Yes if you want to

scan coded stations.Afterwards select the desired

Teletext Language.

Press• OK button on the remote control to continue

and the following message will be displayed on the

screen:

Toselect the“Yes”or“No” option,highlight theitem by

using “ ” or “ ” buttons and press OK button.

Afterwards,the followingOSDwill bedisplayed onthe

screen and the digital television will search for digital

terrestrial TV broadcasts

Note: You can press “MENU” button to cancel.

After all the available stations are stored, Channel• List will be displayed on the screen. If you like the

sort channels, according to the LCN,please select

“Yes” and than press “OK”.

Press• OK button to quit channel list and watch TV.

Installation

Press “MENU” button on the remote control and

select Installation by using “ ” or “ ” button. Press

OK button and the following menu screen will be

displayed.

Select Automatic Channel Scan (Retune) by using

“”/“ ”button and press OK button. Automatic

ChannelScan (Retune)options willbe displayed.You

can select Digital Aerial, Analogue or Digital Aerial-

Analogue tuning using “ ”/“ ” and OK buttons.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1201_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 12 10.11.2010 11:40:4810.11.2010 11:40:48

English - 13 -

Automatic Channel Scan (Retune) Menu

Operation

Digital: Searches and stores aerial DVB stations.

Analogue: Searches and stores analogue stations.

Full: Searches and stores both analogue and aerial

DVB stations.

Whenever you select an automatic search type and• press OK button, a conﬁrmation screen will appear

on the screen. To start installation process, select

Yes, to cancel select No by using .“ ” or “ ” and

OK button.

After auto channel scan type is set and selected• and conﬁrmed, installation process will start and

progressbar willmove along. Press“MENU” button

to cancel process. In such a case, located channels

are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast

entry.

Select• Manual Channel Scan from the Installation

menu by using “ ”/“ ” and OK buttons. Manual

Scan options screen will be displayed.

Select the desired• Search Type using “ ” or “

” button. Manual search options will change

accordingly.Use “ ”/“ ” buttonto highlight anitem

and then press “ ” or “ ” button to set an option.

You can press “M” button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex

or frequency are entered manually and only that

multiplexor frequency aresearched for thechannels.

After selecting search type as Digital, you can enter

the multiplex or frequency number using the numeric

buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use

“”/“ ” button to highlight an item and then press “

” or “ ” button to set an option.

Enter the channel number or frequency using the

numeric buttons. You can then press OK button

to search. When the channel is located, any new

channels that are not on the list will be stored.

Analogue Fine Tune

Select• Analogue Fine Tune from the Installation

menuby using“ ” or“ ” andOK buttons.Analogue

ﬁne tune screen will be displayed. Analogue Fine

Tune feature will not be available if there are no

analogue channels, digital channels and external

sources stored.

Press• OK button to proceed. Use “ ” or “ ” button

to set Fine Tune. When ﬁnished, press OK button

again.

Clear Service List (*)

(*)This setting isvisible onlywhen the Countryoption

is set to Denmark, Sweden, Norway or Finland.

Usethis settingto clearchannels stored.Press “ ”or

“”button to selectClear Service Listand then press

OK. The following OSD message will be displayed

on the screen:

PressOK tocancel. SelectYesbypressing “ ” or“ ”

button and press OK to delete all of the channels.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel List

options.

Press• “MENU” button to view main menu. Select

Channel List item by using “ ” or “ ” button. Press

OK to view menu contents.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1301_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 13 10.11.2010 11:40:4910.11.2010 11:40:49

English - 14 -

Select Edit Channel List to manage all stored

channels. Use “ ” or “ ” and OK buttons to select

Edit Channel List.

Operating the Channel List

Press “• ” or “ ” button to select the channel that

will be processed. Press “ ” or “ ” button to select

a function on Channel List menu.

Use• P+/P- buttons to move page up or down.

Press• BLUE button to view ﬁltering options.

Press• “MENU” button to exit.

Moving a Channel

Firstselect the desiredchannel. SelectMove option• in the channel list and press OK button.

Edit Number screen will be displayed. Enter the• desired channel number by using the numeric

buttonson theremote control.Ifthere isa previously

stored channel on that number, a warning screen

willbe displayed. SelectYes if youwant to move the

channel and press OK.

Press• OK button to process. Selected channel is

now moved.

Deleting a Channel

You can press GREEN button to tag/untag all

channels; YELLOW button to tag/untag channel.

Selectthechannel thatyou wanttodelete andselect• Delete option. Press OK button to continue.

Awarning screen will appear. Select• YES to delete,

select No to cancel. Press OK button to continue.

Renaming a Channel

Select the channel that you want to rename and• select Edit Name option. Press OK button to

continue.

Pressing “• ” or “ ” button moves to the previous/

next character. Pressing “ ” or “ ” button toggles

the current character, i.e., ‘b’ character becomes ‘a’

by “ ” and ‘c’ by “ ”. Pressing the numeric buttons

‘0...9’ replaces the highlighted character with the

characters printed above the button one by one as

the button is pressed.

When ﬁnished, press• OK button to save. Press

“MENU” to cancel.

Locking a Channel

You can press GREEN button to tag/untag all

channels; YELLOW button to tag/untag a single

channel.

Select the channel that you want to lock and select• Lock option. Press OK button to continue.

You will be asked to enter parental control PIN.• Default PIN is set as 0000. Enter the PIN number.

Press• OK button when the desired channel is

highlightedto lock/unlock thechannel. Lock symbol

will be displayed next to the selected channel.

Managing Stations: Favourites

You can create a list of favourite programmes.

Press• “MENU” button to view main menu. Select

Channel List item by using “ ” or “ ” button. Press

OK to view menu contents.

Select• Favourites to manage favourite list. Use “

”/“ ” and OK buttons to select Favourites.

You can set various channels as favourites so that• only the favourite channels are navigated.

Select a channel by using “• ” or “ ” button. Press

OK buttonto add selectedchannel to favouriteslist.

Press OK button again to remove.

Button Functions

OK• : Add/remove a station.

YELLOW• : Tag/untag a channel.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1401_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 14 10.11.2010 11:40:4910.11.2010 11:40:49

English - 15 -

GREEN• : Tag/untag all channels.

BLUE• : Displays ﬁltering options.

Managing Stations: Sorting

Channel List

You can select broadcasts to be listed in the channel

list.Todisplay speciﬁctypes of broadcast,you should

use Active channel list setting.

Select Active channel list from the Channel list

menu by using “ ” or “ ” button. Press OK button

to continue.

You can select a broadcast type option from the list

by using “ ” /“ ” and OK buttons.

On-Screen Information

You can press “INFO” button to display on-screen

information. Details of the station and current

programme will be displayed on the information

banner.

The information banner gives information on the

channel selected and the programmes on it. The

name of the channel is displayed, along with its

channel list number. Hint: Not all channels broadcast

the programme data. If the name and time of the

programmeare not available,then informationbanner

will be displayed with blanks.

If the selected channel is locked, you must enter the

correct four-digit numeric code to view the channel

If the selected channel is locked, you must enter the

correct four-digit numeric code to view the channel

(default code is 0000). “Enter PIN” will be displayed

on the screen in such a case:

Media Playback Using Media

Browser

If the USB stick is not recognized after power off/on

or First Time Installation, ﬁrst, plug the USB device

out and power off/on the TV set. Plug the USB device

in again.

To display Media Browser window, press either

“MENU” buttonon theremote controland thenselect

Media Browser by pressing “ ” or “ ” button. Press

OK button to continue. Media Browser menu options

will be displayed.

Also, when you plug USB devices, media browser

screen will be displayed automatically:

You can play music, picture and video ﬁles from the

connected USB memory stick. Use “ ” or “ ” button

to select Videos, Photos, Music or Settings.

Viewing Videos via USB

When you select Videos from the main options,

available video ﬁles will be ﬁltered and listed on this

screen.Youcanuse“ ”or “ ”buttontoselecta video

ﬁle and press OK button to play a video. If you select

a subtitle ﬁle and press OK button, you can select or

deselect that subtitle ﬁle. The following menu will be

displayed while playing a video ﬁle:

Play ( button): Starts the video playback.

Stop ( button): Stops the video playback.

Pause ( button): Pause the video playback.

Rewind ( button): Goes backward.

Forward ( button): Goes forward.

Subtitle/Audio (LANG. button): Sets subtitle/Audio.

Yellow: Opens subtitle time correction menu

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1501_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 15 10.11.2010 11:40:5010.11.2010 11:40:50

English - 16 -

Press RETURN button to switch back to previous

menu.

Viewing Photos via USB

When you select Photos from the main options,

available image ﬁles will be ﬁltered and listed on this

screen.

0...9 (Jump) (Numeric buttons):Jump to selected

ﬁle using the numeric buttons.

OK: Views the selected picture in full screen.

Slideshow ( button): Starts the slideshow using

all images.

RED button: Sorts ﬁles by date.

YELLOW button: Toggles viewing style.

BLUE button: Changes media type.

GREEN button: Views images in thumbnails.

Slideshow Options

Pause ( button) : Pauses the slideshow.

Continue ( button) : Continues the slideshow.

Previous/Next (Left/Right buttons): Jumps to

previous or next ﬁle on slideshow.

Rotate (Up/Down buttons):Rotates theimage using

up/down buttons.

Loop/Shufﬂe(GREEN button): Pressoncetodisable

Loop. Press again to disable both Loop and Shufﬂe.

Press once more to enable only Shufﬂe. Press again

to enable all. You can follow the disabled functions

with the change of the icons.

RET./BACK: Back to ﬁle list.

INFO: Displays help screen.

Listening to Music via USB

When you select Music from the main options,

available audio ﬁles will be ﬁltered and listed on this

screen.

0..9 (Numeric buttons): Jumps to the selected ﬁle.

Play This (OK button) : Plays the selected ﬁle.

Play ( button) : Plays all media ﬁles starting with

the selected one.

Stop ( button) : Stops playback.

Pause ( button) : Pauses the selected playback.

Previous/Next (Left/Right buttons) : Jumps to

previous or next ﬁle to play.

RED : Sorts ﬁles by Title,Artist or Album.

YELLOW : Change view style

BLUE: Switch between music, photo, video and all.

Loop/Shufﬂe (Grün button): Press once to disable

Loop. Press again to disable both Loop and Shufﬂe.

Press once more to enable only Shufﬂe. Press again

to enable all. You can follow the disabled functions

with the change of the icons.

Media Browser Settings

You can set your Media Browser preferences by

using the Settings dialog. Press “ ” or “ ” button to

highlight an item and use “ ” or “ ” button to set.

View Style: Sets default browsing mode.

Slide Show Interval: Sets slide show interval time.

Show Subtitle: Sets subtitle enabling preference.

Subtitle Language: Sets supported subtitle

language.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1601_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 16 10.11.2010 11:40:5010.11.2010 11:40:50

English - 17 -

Subtitle Position: Sets subtitle position as up or

down.

Subtitle Font Size: Sets subtitle font size (max. 54pt).

Changing Image Size: Picture

Formats

Programmes can be watched in different picture• formats, depending on the transmission received.

Youcanchangetheaspectratio(imagesize)oftheTV• for viewing the picture in different zoom modes.

Press• “SCREEN” button repeatedly to change the

image size.Available zoom modes are listed below.

Auto

WhenaWSS (WideScreen Signalling) signal, which

shows the aspect ratio of the picture, is included in

the broadcast signal or the signal from an external

device, the TV automatically changes the ZOOM

mode according to the WSS signal.

When the• AUTO mode does not function correctly

due to poor WSS signal quality or when you want to

changethe ZOOM mode, changeto anotherZOOM

mode manually.

16:9

Thisuniformlystretchestheleftandrightsidesofanormal

picture (4:3 aspect ratio) to ﬁll the wide TV screen.

For 16:9 aspect ratio pictures that have been• squeezed into a normal picture (4:3 aspect ratio),

use the 16:9 mode to restore the picture to its

original shape.

Subtitle

This zooms up the wide picture (16:9 aspect ratio)

with subtitles to the full screen.

Note: You can shift to screen up or down by pressing

“” / “ ” buttons while picture zoom is selected as

panaromic, 14:9 Zoom, Cinema or Subtitle.

14:9

This zooms up the wide picture (14:9 aspect ratio) to

the upper and lower limits of the screen.

14:9 Zoom

This option zooms to the 14:9 picture.

4:3

Use to view a normal picture (4:3 aspect ratio) as this

is its original size.

Panoramic

This stretches the left and right sides of a normal

picture (4:3 aspect ratio) to ﬁll the screen, without

making the picture appear unnatural.

The top and bottom of the picture are slightly cut off.

Cinema

This zooms up the wide picture (16:9 aspect ratio) to

the full screen.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1701_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 17 10.11.2010 11:40:5010.11.2010 11:40:50

English - 18 -

Conﬁguring Picture Settings

You can use different picture settings in detail.

Press “MENU” button and select the Picture icon

by using “ ” or “ ” button. Press OK button to view

Picture Settings menu.

Operating Picture Settings Menu Items

Press “• ” or “ ” button to highlight a menu item.

Use “• ” or “ ” button to set an item.

Press• “MENU” button to exit.

Picture Settings Menu Items

Mode: For your viewing requirements, you can set

the related mode option. Picture mode can be set

to one of these options: Cinema,Game,Dynamic

and Natural.

Contrast: Sets the lightness and darkness values

of the screen.

Brightness: Sets the brightness value for the

screen.

Sharpness: Sets the sharpness value for the objects

displayed on the screen.

Colour: Sets the colour value, adjusting the colors.

Colour Shift: Adjust the desired colour tone.

Colour Temp: Sets the desired colour tone.

Setting Cool option gives white colours a slight blue

stress.

For normal colours, select Normal option.

Setting Warm option gives white colours a slight red

stress.

Noise Reduction:If thebroadcast signalis weak and

the picture is noisy, use Noise Reduction setting to

reducethe noiseamount. NoiseReduction canbe set

to one of these options: Low, Medium, High or Off.

Game Mode: WhenGame Modeis setto On,speciﬁc

game mode settings, which are optimized for better

video quality, will be loaded.

Note: When Game Mode is on, some items in the

Picture Settings menu will be unavailable to be set.

Picture Zoom:Sets the picture size to Auto,16:9,

Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema.

Reset: Resets the picture settings to factory default

settings.

Whilein VGA(PC)mode, someitems inPicture menu

willbeunavailable. Instead,VGAmodesettings willbe

added to the Picture Settings while in PC mode.

PC Picture Settings

For adjusting PC picture items, do the following:

Press “ ” or “ ” button to select Picture icon. Picture

menu appears on the screen.

Contrast, Brightness, Colour, Colour Temp and

Picture Zoom settings in this menu are identical

to settings deﬁned in TV picture menu under “Main

Menu System”.

Sound,Settings and Source settings are identical to

the settings explained in main menu system.

PC Position: Select this to display PC position menu

items.

Autoposition: Automatically optimizes the display.

Press OK to optimize.

H Position: This item shifts the image horizontally to

right hand side or left hand side of the screen.

V Position: This item shifts the image vertically

towards the top or bottom of the screen.

Dot Clock: Dot Clock adjustments correct the

interference that appear as vertical banding in

dot intensive presentations like spreadsheets or

paragraphs or text in smaller fonts.

Phase: Depending on the resolution and scan

frequency that you input to the TV set, you may see

a hazy or noisy picture on the screen. In such a case

you can use this item to get a clear picture by trial

and error method.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1801_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 18 10.11.2010 11:40:5110.11.2010 11:40:51

English - 19 -

Conﬁguring Sound Settings

Sound settings can be conﬁgured according to your

personal preferences.

Press “MENU” button and select the ﬁrst icon by

using “ ” or “ ” button. Press OK button to view

Sound Settings menu.

Operating Sound Settings Menu Items

Press “• ” or “ ” button to highlight a menu item.

Use “• ” or “ ” button to set an item.

Press• “MENU” button to exit.

Sound Settings Menu Items

Volume: Adjusts volume level.

Equalizer: Press OK button to view equalizer sub-

menu.

In equalizer menu, the preset can be changed to

Music, Movie, Speech, Flat, Classic and User.

Press the “MENU” button to return to the previous

menu.

Note: Equalizer menu settings can be changed

manually only when the Equalizer Mode is in User.

Balance: This setting is used for emphasizing left or

right speaker balance.

Headphone: Sets headphone volume.

AVL:AutomaticVolumeLimiting(AVL)functionsetsthe

soundtoobtainﬁxedoutputlevelbetweenprogrammes

(For instance, volume level of advertisements tend to

be louder than programmes).

Dynamic Bass: Dynamic Bass is used to increase

bass effect of the TV set.

Digital Out: Sets digital out audio type.

Conﬁguring Your TV’s Settings

Detailed settings can be configured to suit your

personal preferences.

Press “MENU” button and select Settings ikon by

using “ ” or “ ” button. Press OK button to view

Settings menu.

Operating Settings Menu Items

Press “• ” or “ ” button to highlight a menu item.

Press• OK button to select an item.

Press• “MENU” button to exit.

Settings Menu Items

Conditional Access: Controls conditional access

modules when available.

Language: Conﬁgures language settings.

Parental: Conﬁgures parental settings.

Timers: Sets timers for selected programmes.

Date/Time: Sets date and time.

Sources: Enables or disables selected source

options.

Other Settings: Displays other setting options of

the TV set.

01_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 1901_MB60_[GB]_(01-TV)_1900UK_IDTV_BRONZE17_19841W_10070519_5017797.indd 19 10.11.2010 11:40:5110.11.2010 11:40:51