MEDITRONIK 3NNet KVM CP-102 User manual

3NNet
USERS MANUAL
KVM CP-102
KVM CP-104
KVM CP-104S / OSD / 19”
Introduction
Thank you for purchasing 3NNet KVM switch. 3NNet KVM switch can save your MONEY, TIME,
SPACE, EQUIPMENT and POWER.
Controlling multiple PCs from One Keyboard, Mouse and VGA Monitor. 3NNet KVM switch is
loaded with features such as hot-key, front panel push button and auto scan control. It has complete
keyboard and mouse emulation for simultaneous PCs boot-up process.
Features
z 2/4 port KVM switch is compact size design, easy portable.
z Support Microsoft Intellimouse, Logitech Net Mouse, etc...
z Support DOS,Win3.X,Win95/98/98SE/2000/ME/XP,WinNT,Netware,Unix,Linux
z Hot Plug - Add or Remove Connected PCs for Maintenance Without Powering Down the
KVM switch or PCs.
z Very High Video Quality - Up To 2048X1536, Bandwidth: 400MHz
z No Software Required - easy PC selection via Push Buttons, Hot Keys
z Auto Scan Mode for monitoring PCs
z Keyboard status restored when switching PCs
z LED Display for easy status monitoring
z Buzzer sound for switching port confirmation.
Package Contents
KVM CP-102 KVM CP-104 KVM CP-104S/OSD/19”
3NNet 2 port KVM Switch (Plastic)
User’s manual
3NNet 4 port KVM Switch (Plastic)
User’s manual
3NNet 4 port KVM Switch (Plastic)
User’s manual
Technical Specifications
Functions KVM CP-102 KVM CP-104 KVM CP-104S
OSD / 19”
PC Port 2 4 4
Console Port 1 1 1
MAX PC Connections 2 4 4
LED 2 8 4
PC Port Connector
(All Female Type)
PS/2 Keyboard mini-Din 6 pin
PS/2 Mouse Mini-Din 6 pin
VGA HDDB 15pin
Console port connector
(All Female Type)
PS/2 Keyboard mini Din 6 pin
PS/2 Mouse Mini Din 6 pin
VGA HDDB 15pin
PC selection Hot Key / Button
On Screen Display Control NO
Scan Intervals 8sec.
Keyboard Emulation PS2
Mouse Emulation (Console port to PC port) PS2
VGA Resolution 2048X1536
Bandwidth 400MHz
Daisy Chain and Levels NO
Housing Plastic Metal Plastic
Size Mini Desktop Desktop Desktop

Weight (g) 140g 720g 300g
Dimension (mm) 110(L) X 74(W) X 29(H) 200(L) X98 (W) X 44(H) 190(L) X 74(W) X 29(H)
System Requirements Specifications
Functions KVM CP-102 KVM CP-104
KVM 104S/OSD/19”
Console side One VGA Monitor
One PS/2 Keyboard
One PS/2 Mouse
One VGA Monitor
One PS/2 Keyboard
One PS/2 Mouse
Computer Side Two HDB 15 pin male to male VGA cables
Two PS/2 cable male to male for Keyboard
Two PS/2 cable male to male for Mouse
Four HDB 15 pin male to male VGA cables
Four PS/2 cable male to male for Keyboard
Four PS/2 cable male to male for Mouse
Product Details
KVM CP-102 KVM CP-104
<Diagram> <Diagram>
KVM CP104S/OSD/19” front and rear views :
<Diagram>
Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
1. Connect the Keyboard, VGA, Mouse cables to the computer ports of KVM switch
2. Connect the Keyboard, VGA monitor, and Mouse to console port of KVM switch
3. After Powering on computers and finishing the boot-up process, you can start to go KVM
switch.
Note:
Please don't switch the PC port (i.e. Don't press the push button of KVM switch or run hot key)
during the computers are under boot-up process.
Usage
The push Button:
Pressing the button cyclically through all the ports.
CP-102 (2 Ports)
1 2

Normally, there is one LED is always lit (i.e. the console is connected to this PC port) for one PC
port and the other PC port's LED is off, when you power on KVM switch.
When you select one of two PCs and it is shut down, the selected port LED flashed.
KVM CP-104
KVM CP-104S/OSD/19” (4 Ports)
1 2 3 4
KVM CP-104 has separate push button on the panel
You can press the buttons in order like mentioned-above diagram or also press the destination
button you want directly.
When you select one of four PCs and it is powered on, the selected port LED is lit.
When you select one of four PCs and it is shut down or disconnected a PC, the selected port LED
flashed.
Keyboard Hot Key Commands:
You can also conveniently command 3NNet KVM to switch ports through simple key sequences.
To send commands to 3NNet KVM, The SCROLL LOCK key must be pressed twice within 2
seconds. You will hear a beep for confirmation.
Below are the different commands:
SCROLL SCROLL
LOCK LOCK Previous Channel
SCROLL SCROLL
LOCK LOCK Next Channel
SCROLL SCROLL
LOCK LOCK Auto Scan
SCROLL SCROLL
LOCK LOCK select PC port directly
SCROLL SCROLL
LOCK LOCK Beeper On (Factory default Off)
To get out of Auto Scan Mode, Press any key or SPACE bar.
Troubleshooting
Ensure that all cables are well seated. Label all of cables with the number for each respective
computer to avoid confusion.
1. KVM switch draws the power from keyboard port of computers. If the computer like laptop
computer, notebook computer or the other computer cannot support enough power to KVM
switch, please add a DC 9V, 500mA to the power jack. The power jack polarity is center
S
1
(or 2 or 3 or 4)
B

positive.
2. Don't press any keys on the keyboard while the selected computer is booting up. Otherwise, it
might cause the keyboard error or keyboard is not detected at PC side.
3. The computer boot up fine, but keyboard doesn't work
z Make sure the keyboard works when directly plugged into the computer.
z Try a different keyboard, but use only 101, 102 or 104-key keyboard.
4. The Mouse is not detected during PC boot up.
z Make sure the mouse works when directly plugged into the computer.
z Make sure the mouse is a true PS/2 mouse. A combo mouse will work just as long as it is
set for PS/2 mode with the correct adapter.
z Try a different mouse.
5. Avoiding moving the mouse or pressing the mouse buttons when switching the port.