Mei-cha Lumi User manual
QUICK START
GUIDE
1
TOUCH PANEL
KIT CONTENTS
ASSEMBLY
OPERATION
CARE INSTRUCTION
WARRANTY
3-4
5-6
7-12
13-16
17
18
2
TOUCH PANEL: FRONT
PROGRAM:
BROW
PROGRAM:
MED
PEN A
PEN B
PROGRAM:
LINER
PROGRAM:
LIP
ON/OFF
BUTTON
SPEED
(PULSE PER
SECOND)
3
TOUCH PANEL: BACK
POWER
BUTTON
PEN A PORT
POWER
OUTPUT
PEN B PORT
FOOT PEDAL
OUTPUT
4
DEVICE POWER CORD
5
POWER SUPPLY
LUMI PAD
KIT CONTENTS
STAND
LUMI PEN POWER CORD
6
LUMI PEN
FOOT PEDAL
1. CONNECT LUMI PEN POWER CORD TO END OF LUMI PEN.
LUMI SYSTEM CAN ACCOMONDATE UP TO TWO PENS FOR DIFFERENT PROCEDURE USAGES.
2. FEED LUMI PEN POWER CORD, POWER CORD AND FOOT PEDAL (OPTIONAL) THROUGH THE STAND.
7
ASSEMBLY
8
3. ATTACH CORDS TO THE BACK OF DEVICE.
PEN A PORT
POWER OUTPUT
PEN B PORT
FOOT PEDAL OUTPUT
9
4. TWIST AND LOCK STAND INTO THE BACK OF LUMI PAD.
MATCH INDICATION MARK WITH THE LOCK SYMBOL
AND TURN STAND COUNTER CLOCKWISE.
10
5. CONNECT POWER SUPPLY UNIT TO THE DEVICE POWER CORD.
PLUG INTO WALL ADAPTOR.
1
11
2
6. PUSH 1:POWER BUTTON ON THE BACK OF DEVICE TO POWER ON.
LUMI PANEL IN 2:STANDBY MODE.
12
7. ATTACH ULTRA PRECISION NEEDLE TO LUMI PEN.
8. LUMI DIGITAL DEVICE IS NOW READY TO USE!
13
1. SELECT FROM EITHER
A OR B LUMI PEN.
2. SELECT PROGRAM
FROM DISPLAY PANEL.
3. TOUCH + TO INCREASE SPEED
AND — TO DECREASE SPEED.
OPPERATION: TOUCH PANEL
14
4. TOUCH THE ON/OFF
BUTTON TO START.
5. SELECT BETWEEN
A AND B TO SWITCH PEN.
6. REPEAT STEP 3 TO 5
TO OPERATE.
15
1. SELECT EITHER LUMI
PEN A OR B.
2. SELECT PROGRAM
FROM MENU.
3. ADJUST SPEED.
OPPERATION: PROGRAM PERSONALIZED SETTINGS
16
4. PRESS AND HOLD THE
PROGRAM BUTTON FOR 3
SECTIONS UNTIL BEEP TO
LOCK SETTING.
5. CONFIRM SPEED AND PRESS
ON/OFF BUTTON TO START.
17
MACHINE GETS TOO HOT:
Check speed control and allow 20
minute intervals between each procedure.
TROUBLESHOOT
INCONSISTENT OR NO POWER:
Verify that machine is turned on.
Make sure all cords are attached properly.
Try with dierent speed control or adapter.
Make sure the right Lumi Pen A/B is selected.
NEEDLE DOES NOT MOVE OR NEEDLE HESITATES
Check all components are assembled correctly.
Replace dull needle with a new one.
MAINTENANCE
Remove the power adaptor by holding the plug.
Please do not pull the cords.
Handle the device with care.
Do not use abrasive material to clean the device.
If your device does not operate after the above steps have been
taken, please contact your distributor for warranty options.
Lumi Digital Device is designed for micropigmentation purpose and
for trained professional use only. Neither MEI-CHA or its aliates
assume responsibility or liability for any injuries or damages,
resulting, directly or indirectly, from the use of this product.
18
WARRANTY
MEI-CHA warrants the LUMI DEVICE for a period of ONE (1) YEAR and after the
original date of purchase, against defects due to faulty manufacturing or material.
If you discover a defect and notify MEI-CHA during the warranty period, MEI-CHA
will repair or replace the machine free of charge. This warranty will be void if the
machine has undergone repeated dropping, exposure to moisture, or shows
signs of misuse that will comprise its functionality.
For warranty claims, please contact your MEI-CHA distributor
@MEICHA_OFFICIAL #MADEWITHMEICHA
MEI-CHA.COM
Table of contents
