Racelogic MFD Touch User manual
Hardware Overview
SD Card
MFD Touch uses an SD card inserted in to the Left Side of the Unit to save and load settings, save tests results and
update the firmware. The unit is supplied with an 8 GB SDHC card in a FAT32 file format, which is the only file format
supported. If you are looking to purchase a new SD card, it is recommended that any card used has a write speed of
above 7 MB/s (4 MB/s absolute minimum) and a speed class of 10 (4 absolute minimum). Racelogic recommend SD
cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure best results.
IMPORTANT – If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into
a FAT32 file system before it will work with a VBOX Touch unit. More information on this can be found here.
Screen Overview
Setup
2. Connect the Swivel Neck Richter Suction Mount (RLACS277) to the rear of the unit and attach to the vehicle
windscreen.
https://en.racelogic.support//Product_Info/Displays/MFD_Touch/Quick_Start_Guide/MFD_Touch_Quick_Start_Guide
2
3. Connect the power via the Power socket.
4. Insert the SD card into the Side of the Unit.
https://en.racelogic.support//Product_Info/Displays/MFD_Touch/Quick_Start_Guide/MFD_Touch_Quick_Start_Guide
3
Other manuals for MFD Touch
3
Table of contents
