Melaco HOME OFFICE SELECT User manual

home oce-module ASSEMBLY INSTRUCTIONS
more info:
www.melaco.com.pl www.flickandclick.eu
MELACO sp. z o.o.
ul. Ciepielowska 9,
67-100 Nowa Sól
oce [phone]
sales [phone]
[e-mail]
assembly
instructions
HOME OFFICE SELECT MODULE
HOME OFFICE 4YOU MODULE

included
MODULE ELEMENTS
instruction
HOW TO ASSEMBLE A MODULE
Before starting the assembly, scan the code
or go to the website www.flickandclick.eu
and watch the instructional video.
The assembly does not require the use of tools.
1 Unpack the elements and sort them by dimensions (fig. 1).
2 Take any side of the cabinet. If there are elements
of dierent length, we recommend that you start
with the longer one.
3 Place the side on an even horizontal surface, with
anti-scratch material first.
4 The element has a cut for the rear wall. Arrange it
so that it is closer to you.
5 Take the next side of the cabinet, check where the cut is.
6 Make sure that the cut is on the same side as in the first
element! Press the element gently to match the male click
to the female click or vice versa (depending on the
element in your hand).
7 You will hear a click when you fold it properly.
This means that the elements have been connected.
8 If necessary, align the parts so that the leading
edges meet evenly.
9 Take the other side and repeat the operation for the
other side. You have received a U-shaped piece with
a cut on one side (fig. 2).
10 Take the rear wall (B) and slide it into the cut so that
the element surface is flush with the edge
of the cabinet (fig. 3).
11 Time for the last side of the cabinet. First connect it
on the male click side, making sure that the back wall
fits into the cut (fig. 3).
12 The module is ready!
Four side walls
One rear wall
A
B
▶
▶
A
A
AA B
feminine Click male Click
click click
click click
g. 1
g. 2
g. 3 AB
home oce-module ASSEMBLY INSTRUCTIONS