Panduit TX6 PLUS User manual

TX6 PLUS and TX5e
Shielded Jack Modules
Part Numbers: CJS688TGY, CJSK688TG**, CJS5E88TGY, CJSK5E88TG**, CJSQ688TG**
Page 1 of 2
INSTALLATION INSTRUCTIONS
©Panduit Corp. 2010
For Technical Support: www.panduit.com/resources/install_maintain.asp
2.0 in
(50.8mm)
.5 in
(12.7mm)
Drain Wire
Drain wire
Conductors
Overall Foil
Screen
FTP / ScTP
Cable
End 1
Cable
End 2 3
1
2
2
4
Cable End 1 Cable End 2
Pr1
Pr2
Pr3
Pr4
Pr4
Pr1
Pr2
Pr3
TERMINATION STEPS
5
1
S-FTP
2.0 in
(50.8 mm)
.5 in
(12.7 mm)
CWST
Braid
Conductors
Overall Foil
Screen
Jack
Wire Cap
Strain Relief
Collar
White - TX6 PLUS
Red - TX5e
STP / PIMF
Braid
Conductors
Individual Foil
Pair Screen
.5 in
(12.7 mm)
2.0 in
(50.8 mm)
CWST
Trim pair separator and/or rip cord if
present.
Note: For bulk packaged TG Style Jack Modules add -24 to end of part number.
6EGJT
** Denotes color.
PN399F

Page 2 of 2
INSTALLATION INSTRUCTIONS
For Instructions in Local Languages
and Technical Support:
http://www.panduit.com/resources/install_maintain.asp
E-mail:
[email protected]
Fax:
[phone]
www.panduit.com
Cable End 1
Cable End 2
Cable End 1
Cable End 2
7
T568B T568A
12
1
3
1
2
3
1
2
3
See note 4.
CWST
8
9
10
11
CJSGK-X
KIT
12
REMOVAL STEPS
3
Notes:
1. For specified performance, follow TIA/EIA 568-C installation guidelines.
2. Jack Modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062 inch (1.57 mm) maximum insulated conductor outside diameter.
3. Jack Modules may be re-terminated a minimum of 20 times.
4. On cable end 2 for A & B wiring and cable end 1 of A wiring, wrap the designated pairs around the proper center dividing post (A or B) and terminate in the proper location.
5. CJSGK-X Grounding Kit is REQUIRED for all Mini-Com Modular Patch Panels, but is optional for Mini-Com All Metal Shielded Modular Patch Panels.
6. For technical and performance information, consult Panduit Technical Support.
As with all Wiring Accessories, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
4. Use caution when installing or modifying communication wiring.
See note 5
12
2
EGJT
Drain Wire
FTP/ScTP
©Panduit Corp. 2010 PN399F