Mellerware Helios 27200 User manual

R
e
g
i
s
t
e
r
o
n
l
i
n
e
N
e
v
e
r
l
o
s
e
y
o
u
r
r
e
c
e
i
p
t
e
N
e
Stainless steel double
spiral elements
Thermostat control for
each hotplate
On/Off lights for each
hotplate
27200_IM.indd 1 2012/09/11 02:19:37 PM

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed includ-
ing the following:
1. Read all instructions before operating.
2. Do not touch hot surfaces. Use handles or
knobs.
3. To protect against electrical shock do not
immerse cord, plug, base of the unit, or the
complete appliance in water or other liquid.
4. Close supervision is necessary when any
appliance is used by or near children.
5. Unplug from the outlet when not in use
and before cleaning. Allow the appliance to
cool before putting on or taking off parts,
and before cleaning the appliance.
6. Do not operate any appliance with a dam-
aged cord or plug, or after the appliance
malfunctions or has been damaged in any
manner.
7. If a problem arises return the appliance to
an authorized service agent for examina-
tion, repair or adjustment.
8. Do not use accessories or attachments that
are not recommended by the appliance
manufacturer.
9. Do not use outdoors.
10. Do not let the cord hang over the edge of a
table or counter, and do not touch the hot
surfaces.
11. Do not place on or near a hot gas or elec-
tric burner, or in a heated oven.
12. Ensure that the control knob is turned to
the off setting before inserting or removing
the plug from the wall outlet.
13. Do not use the appliance for anything other
than it’s intended use.
14. Extreme caution must be used when mov-
ing an appliance containing hot oil or other
liquids.
15. Place a heat resistant pad or mat under the
unit before using it to prevent possible heat
damage to the counter or table top.
16. Any appliance when plugged into an elec-
trical outlet should not be left unattended.
17. Do not clean with metal scouring pads,
which can break off the pad and touch the
electrical parts, creating a risk of electrical
shock.
18. Any maintenance other than cleaning
should be performed only by an authorized
service/repair agent. Alternatively the appli-
ance can be returned to the store where it
was purchased, along with the purchase
slip.
19. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge, un-
less they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
20. Children should be supervised to ensure
that they do not play with the appliance.
21. The temperature of accessible surfaces
may be high when the appliance is operat-
ing.
22. This appliance is not intended to be oper-
ated by means of an external timer or sepa-
rate remote-control system.
23. This appliance is for household use only.
27200_IM.indd 2 2012/09/11 02:19:37 PM

Tips about the electrical cord
• A short power-supply cord is provided to
reduce the risk of entanglement.
• Longer detachable power-supply cords or
extension cords are available and may be
used if care is taken.
• If a long detachable power-supply cord or
extension cord is used:
•The marked electrical rating of the cord
set or extension cord should be greater
than the electrical rating of the appli-
ance.
•The longer cord should be arranged so
that it will not drop over the counter top
or table top where it can be pulled on by
chidren or tripped over unintentionally.
Operating Instructions
1. Place your stove on a solid, safe surface.
Do not place it on a glass surface or a fine-
ly finished wood surface.
2. Place a heat resistant pad or mat under the
unit before using it to prevent possible heat
damage to counter or table top.
3. Plug the cord into the electrical wall outlet
and turn the thermostat to the desired heat
setting (heat selection from 1 to 6).
4. Turn the thermostat to lowest setting (0 po-
sition) when finished. Then unplug the cord
from the electrical outlet.
Cleaning Instructions
1. Unplug the cord.
2. Wipe the surface with a damp cloth or
sponge. Do not use steel wool or abra-
sives.
3. No maintenance other than cleaning is
required on this appliance.
NOTE!
IF THE SUPPLY CORD IS DAMAGED IT
MUST BE REPLACED BY THE MANUFAC-
TURER OR IT ‘S SERVICE AGENT TO AVOID
A HAZARD.
27200_IM.indd 3 2012/09/11 02:19:37 PM

27200_IM.indd 4 2012/09/11 02:19:37 PM