Memorex MAHN40 User manual

MAHN40 v2751-01
Noise Canceling Bluetooth Headphones
Warning: To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualied service personnel.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
This symbol indicates that this product incorporates
double insulation between hazardous mains voltage
and user accessible parts.
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufcient magnitude
to constitute a risk of electric shock to persons.
This product utilizes a Class 1 laser to read Compact
Discs. This laser Compact Disc Player is equipped with
safety switches to avoid exposure when the CD door
is open and the safety interlocks are defeated. Invisible
laser radiation is present when the CD Player’s lid is
open and the system’s interlock has failed or been
defeated. It is very important that you avoid direct
exposure to the laser beam at all times. Please do not
attempt to defeat or bypass the safety switches.
Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
• Do not defeat the safety purpose of the polarized or grounding -
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. When the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for
long periods of time.
• Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
FCC Statement
Warning: Changes or modications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.
• Mains plug is used as disconnect device and it should remain readily
operable during intended use. In order to disconnect the apparatus
from the mains completely, the mains plug should be disconnected
form the mains socket outlet completely.
• WARNING: To reduce the risk of re or electric shock, do not expose
this apparatus to rain, moisture, dripping, or splashing.
• CAUTION: Use of controls or adjustments or performance of
procedures other than those specied may result in hazardous
radiation exposure.
• WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
• WARNING: Do not place this unit directly onto furniture surfaces
with any type of soft, porous, or sensitive nish. As with any rubber
compound made with oils, the feet could cause marks or staining
where the feet reside. We recommend using a protective barrier
such as a cloth or a piece of glass between the unit and the surface
to reduce the risk of damage and/or staining.
• WARNING: Shock hazard - Do Not Open.
• Caution and marking information is located at the rear or bottom of
the apparatus.
• Objects lled with liquids, such as vases, shall not be placed on
the apparatus.
• Keep new and used batteries away from children. If the battery
compartment does not close securely, stop using the product and
keep it away from children.
• If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
• CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• WARNING: There is a danger of explosion if you attempt to charge
standard Alkaline batteries in the unit. Only use rechargeable NiMH
batteries.
• Battery shall not be exposed to excessive heat such as sunshine,
re, or the like.
• Do not mix old and new batteries.
• Completely replace all old batteries with new ones.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad,
ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and local
guidelines.
Warning: Do not ingest battery, chemical burn
hazard.
WARNING : This product can expose you to
chemicals including lead, which is known to the State
of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65Warnings.ca.gov. This product meets and
complies with required Federal product guidelines.
Includes
• 3.5mm audio cable
• Micro-USB to USB charging cable
Features
• Bluetooth 5.0
• Bluetooth Wireless: range -33ft.
• Built-in microphone
• Aux in (3.5mm audio input)
• Folding adjustable headband
• On-ear controls
• Voice prompts announce headphone
operations
• Built-in rechargeable lithium ion
battery: life - approx. 8 hrs at 50%
volume + ANC on
• Micro-USB port for battery recharge
DC IN
AUX IN
LED
MIC
ANC ON / OFF
Volume/Skip
Press to adjust volume.
Press and hold to skip tracks.
Power/Play / Pause / Speakerphone
Press and hold to power ON or OFF
Press to play or pause audio.
Press to answer incoming phone call.
Active Noise Canceling
Press and hold to turn active noise canceling ON/OFF
DC Power Input
Microphone
Indicator LED
Aux In
STATUS INDICATOR
Power On Flashing blue light
Charging Solid red light
Charging Complete Light OFF
Pairing Flashing red / blue light
Pairing Complete Flashing blue light

Pairing Bluetooth & Playing Audio
After initial pairing to a Bluetooth device, the headphones will stay paired
unless unpaired manually by the user, or erased due to a reset of the device. If
your device should become unpaired or you nd it is unable to connect, repeat
these steps.
1. Power ON the headphones.. The headphones defaults to Bluetooth
Mode and is ready to pair automatically. When pairing, remain within 3
feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select MAHN40 in the
Bluetooth Settings to pair. If need be, refer to the user’s manual for
your specic device for more information.
3. When successfully paired, a voice will announce, “Bluetooth is
connected.” Your Bluetooth device will now be heard through the
headphones.
4. Use the controls on the connected Bluetooth device to select and
play audio. Use the headphone controls or the connected Bluetooth
device to play, pause, skip and adjust the volume level. Note: To pair
to a different Bluetooth device, turn off Bluetooth on the currently
connected device rst.
Aux In
Aux In mode will function even if the headphones are not powered on. To
conserve battery power, keep them powered off when using Aux In.
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Aux In on the headphones and
the audio output on an audio device.
2. Use the controls on the connected device to select and play audio.
Active Noise Canceling
The Active Noise Canceling feature will electronically mute background noise.
It can be used with the Bluetooth or Aux In modes to enhance the quality of
any music or audio that is playing through the headphones.
Active Noise Canceling mode will function even if the headphones are not
powered ON.
1. To activate noise cancelling, press and hold the Mbutton. The
Indicator LED will turn green.
2. To deactivate noise cancelling, press and hold the Mbutton again. The
green LED will turn off.
DC IN
AUX IN
LED
MIC
ANC ON / OFF
Previously Connected Devices
• The headphones can remember multiple Bluetooth devices and will
always try to re-connect to the last device used.
• To re-connect to a different device, turn off Bluetooth on unwanted
devices, then access the Bluetooth settings menu on the device you
wish to use and select MAHN40.
Battery Charging
Initial charge time is approximately 3 hours. Charge fully before use. The low
battery indicator will ash, a voice prompt will announce “low battery,” then
the unit will automatically power OFF.
1. Using a Micro-USB to USB cable (included), connect to the USB port
of a powered on computer or USB power adaptor (not included) to
charge the unit.
DC IN
AUX IN
LED
MIC
ANC ON / OFF
Protect for Today
Sustain for Tomorrow
Made
Green
Contact Information
Website: www.memorex.com
Email Support: [email protected]
Email Parts: [email protected]
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the most up-to-
date version of this User’s Guide, go to:
www.memorex.com
Copyright © 2020 Digital Products International (DPI, Inc.) All other trademarks appearing herein are
the property of their respective owners. Specications are subject to change without notice.
Customer Support