MEMUP M40 Troubleshooting guide

& Installation Guide
User
Feel Design

USER & INSTALLATION GUIDE
1.Warning ........................................................................................................ 1
2.Product Informations .................................................................................. 3
3.Power On / Power Off .................................................................................. 5
4.Player function operation instruction........................................................ 6
5.Setup........................................................................................................... 11
6.Transcoding tool........................................................................................ 11
7.Technical Specifications ........................................................................... 14

- 1 -
Do not touch power supply adapter with wet hands.
It may cause an electric shock
Use standard power supply adapter.
It may cause damage to this player by using a non-
Standard power supply adapter
Make sure power supply faucet connected to correct
underground cable.
It may cause an electric shock
Make sure power supply adapter plugged in socket tightly.
It may cause fire.
Do not play too long with max volume.
It may cause harm to your hearing.
Do not strike the player.
It may damage the player
Do not wear earphones when driving.
It may cause accident.
If this player gives off smoke or heat, please stop using it
immediately and contact customer service centre.
Keep on using this player will be dangerous.

- 2 -
Keep this player between 0°c and 40°c.
Do not put player in dust or damp condition.
It may damage the player.
Do not expose player in sun shine directly.
It may damage the player
Do not put the player close to a credit card, etc…
It may damage magnetic parts of credit card, etc …
Please clean player by cleaning and soft cloth, do not use
any detergent.
It may damage the player.
Do not let dust or liquid matter into the player.
It may damage the player.
If it happens, please contact customer service centre.
Do not take apart or fix player by yourself.
It may damage the player.
Do not make player fall.
It may damage to the player.

- 3 -
PRODUCT INFORMATIONS
Product functions
Compatible with audio format
MP3/WMA/WAV format.
Compatible with video format
AVI/ASF format.
Support function of picture browsing
JPEG/BMP/GIF/PNG format.
Support function of E-book
E-book files in TXT format (in ANSI Unicode)
Support function of FM radio
Frequency ranging from 87.5 to 108 MHZ
Support FLASH playing
With Macromedia Flash Lite 2.1.
Embedded with 4 inch TFT LCD screen
High definition pictures and videos with 16M colors.
Built-in rechargeable battery
Extra batteries are not necessary.
Video Format Conversion Software
Convert video file which is unable to be played into playable format with conversion software.
Package Content
1. PMP
2. Manual
3. AC adapter
4. AV in/out cable
5. USB line
6. Earphone
7. Carry case

- 4 -
Function display
1. Power 10. Power Indicator
2. Esc: Escape 11. CHG Indicator
3. Mic: Microphone 12. USB Port
4. Up: Previous 13. AV Out / Earphones Jack
5. Play: Play / Pause / Confirm 14. AV In
6. Down: Next 15. SD Card reader
7. Vol+: Volume Up 16. DC In
8. Menu 17. Reset
9. Vol-: Volume Down

- 5 -
Connection
External audio connection: with double jack line connection
Stereo earphone connection: plugged needed for radio reception
Connect with TV: with supplied audio/video cable, for input and output
Computer connection thanks to USB cable
Caution: Unexpected interruption may cause damage to this product!
Charge
Tips: During recharge, please don’t pull out plug, the product will be damaged.
Recharge mode
Connect AC adapter to charge. In recharging mode, indicator is red and go out when battery is full
Charge indication
POWER ON / POWER OFF
Power on
Long press “POWER” 3-5 seconds, indicator will turn green.
Power off
Long press “POWER” 3-5 seconds, indicator will go out.

- 6 -
PLAYER FUNCTION OPERATION INSTRUCTION
Main menu interface
9 icons on main menu interface.
On the bottom bar : volume, power, time (as picture)
Tips: This product is compatible with Windows 98Se, Me, Windows 2000, Windows XP,
Windows Vista, MAC OS 10 etc.
Video Player
Select “Video Player” and press “Play” to confirm, it enters into video browser to display video files.
Press “Menu” to display operation:
1. Display Mode: “List” or “Thumbnail”.
2. Loop Mode: “Current”, “All” or “Random”.
3. File Protect: “Lock” or “Unlock”.
4. Del File: “Current” or “All”.
5. Resume: Play last file played (previously saved as bookmark)
6. Exit: Select “Exit” and press “Play” to return to main interface
a. Press “Vol+” or “Vol-” to select video file or to adjust volume
b. Press “Play” to play, pause, resume or confirm
c. Press “ESC” to stop playing, then choose “OK” or “Cancel” to bookmark.
Through “Vol+” or “Vol-“ to choose whether to save
d. Press “Up” or “Down” to play previous or next file

- 7 -
e. During video play, press “Menu”, then icons of video function will display: “Mode” Icon of video
function will change from grey to light green.
Press “Up” or “Down” to switch forward or backward. you can press “Up” or “Down” to change
speed (x2x4x8x16), and press “Play” to resume normal play.
Tips: Forward or Backward function is under condition of “menu” button activated.
Audio Player
Select “Audio Player” and press “Play” to confirm, it enters into audio browser to display audio files.
Press “menu” to display operation:
1. Loop Mode: “Current”, “All” or “Random”.
2. File Protect: “Lock” or “Unlock”.
3. Del File: “Current” or “All”.
4. EQ Mode: “Normal”, “Classic”, “Popular” , ”Bass” or “Rock”.
5. Exit: Select “Exit” and press “Play” to return to main interface
Press “Vol+” or “Vol-” to select audio file or to adjust volume
Press “Play” to play, pause or resume
Press “ESC” to stop playing or return to file list, press it again to go to main menu
Press “Up” or “Down” to play previous or next file

- 8 -
During audio play, press “Menu”, icon “Mode” will change from grey to green.
Press “Up” or “Down” to switch forward or backward.
Press “Vol+” or “Vol-” to switch to EQ mode.
During forward or backward, you can press “Up” or “Down” to change speed (x2x4x8x16), and
press “Play” to resume normal play.
Lyrics synchronous display
To make lyrics and music display synchronously, make sure music and lyrics files are both copied in
same MP3 folder with same file name, lyrics file name should be: *.LRC, otherwise lyrics can not be
displayed synchronously when playing music files.
Picture View
Select “Picture View” in main interface, press “play” to enter.
Press ”Menu” to show operation:
1. Display Mode: “Thumbnail”, “List” or “Slide”.
2. File Protect: “Lock” or “Unlock”.
3. Del File: “Current” or “All”.
4. Wall Paper: Make current photo as desktop background
5. On Menu: Make current photo as start-up image
6. Off Menu: Make current photo as power-off image
7. Exit: Select “Exit”, and press “play” to confirm
Press “play”, photos are displayed on screen
Press ”Esc”, stop pictures browsing and return to ”file list”
Press “up” or “down” to display previous or next file; you can press “menu” in photo file list, and then
select “Display Mode / Slide”, “Slide” function starts by pressing “Play”.
Desktop Background:
Select pictures through “Vol+” and “Vol-” in picture list, and then press “menu” to select “Wall
Paper”, and current picture can be set as desktop background by pressing “play” to confirm.
All pictures stored in player can be set as desktop background and startup / power-off image.
Radio
For FM radio, earphones must be plugged as they are radio antenna.
In main interface, select “Radio” and press “Play” to start.
Default state is preset with 20 stations for your selection (press “Up” or “Down” to select)
Press ”Vol+” and “Vol-” to adjust volume
During FM play, Press “Menu” to select “Manual Search”, “Select Channel” and “Auto Search”:
Manual Search
Select “Manual Search”, press “Up” or “Down” to switch frequency; press “Play”, it will ask to save,
press “Play” to save, and press “Esc” to exit.

- 9 -
Select Channel
Choose “Select Channel”, press “Up” and “Down” to change saved frequency; press “Up” and
“Down” to switch previous or next saved channel; press “Esc” to exit station.
Auto Search
Select “Auto Search”, FM will search automatically (87.5 MHz-108 MHz) and save each station
searched to preset spot (former preset station will be covered), if 20 preset stations are saved, auto
search function will stop, and automatically switch to effective radio; press “Esc” to exit.
AudioRecord
Recording modes: one is built-in MIC, the other is audio recording through external Line In.
In record function, you can switch MIC recording or audio recording through “Up” and “Down”.
MIC recording
Press “Play” to start or to pause recording; press “Esc” to stop recording.
After record paused or stopped, player can save recorded file and exit recording by pressing “Esc”.
MIC recording file: Bit ratio 32kbps; Sampling ratio 8 KHz; File extension name WAV
Line in
Please connect one end of Line-in to output port of audio device (such as earphone jack etc), the
other end will be connected with AV-In jack of the player.
Switch to “AV-In”, press “Play” to start recording, press again “play” to pause; press “Esc” to stop.
When paused or stopped record, player can save recorded file and exit recording by pressing “Esc”.
Line In recording file: Bit ratio 64kbps; Sampling ratio 32 KHz; File extension: MP3
Flash Player
Select “Flash Player” in main interface, press “Play” to confirm enter into Flash player.
Press “menu” to pop up operation:
1. Play Flash: press “Play” to play Flash file
2. File protect: “Lock” and “Unlock”
3. Del File: “Current” and “All”.
4. Exit: Select “Exit”, press “Play” to confirm
Select video by pressing “Vol+” and “Vol-”, press “Play”; during playing, press “Vol+” or “Vol-” to
adjust volume; press “Esc” to exit.

- 10 -
E_books
Select "E-book", press "Play" to enter
The format of e-book is TXT file format (ANSI Unicode);
1. Select "E-book", press "Play" to enter.
2. Press "Vol +", "Vol -" to select files and press "Play" to read, and press "Up", "Down" to move to
previous page and next page
3. Under E-book menu, press "menu", pop-up menu will appear:
Browse Mode: "Manual", "0.5 seconds", "1 second" or "two seconds"
File protect: “Lock” and “Unlock”
Del File: “Current” and “All”
Exit: Select “Exit”, press “Play” to confirm, and “Esc” to return to main interface
4. When setup finished, press "Esc” to exit
5. Setting bookmarks: system will automatically mark e-books and open last page.
Tools
Select "Tool" on main interface, press "Play" to enter.
Calculator
Press "Vol +", "Vol -" and "Up", "Down" to select and press "Play" to confirm.
Notepad
To read text.
Memory
Display SD card or memory situation, to format, press "Play" to confirm.
Caution: Please backup data before formatting memory or SD Card.
Files must be copied under corresponding folder; otherwise you can’t read your file.
Upgrade
Press "Vol +" or "Vol -" to select media to upgrade, press "Play" to confirm.
VideoRecord
1. In “Tool” menu, please connect one end of video recording cable with player AV-IN Port, another
end connect with other equipment input port (such as TV and other devices)
2. Select "VideoRecord" by pressing "Up", "Down", press "Play" to confirm; press "MENU" to display
Setup: “Video Size” and “Video Format”.
Size: “320*240” or “640*480”
Format: "ASF" or "AVI"
3. Press "Play" to start recording, press "Esc" to stop, press longer "Esc" to return to main interface.

- 11 -
Setup
Select "Setup" in main interface and press "Play" to enter system settings.
Language
6 available languages.
TV Out
“LCD Output”, "NTSC Output", and "PAL Output".
Default
You can select “Yes” or "No" to recover, setup includes starting image. Data will not be changed.
Sound
Control speaker and sound. Press "Vol +" and "Vol -" to move up and down.
Auto off
The player can turn off as your setting. You can select time what you want.
Time
Press “Up” and “Down” to move left to right, press "Vol +" and "Vol -" to change numbers.
Volume
Press “Up” and “Down” to adjust volume.
SPCA5050 TRANSCODING TOOL
Installation of SPCA5050 Transcoding Tool
1. Running installation program (setup.exe), select installation language.
2. Key in your name and company.
3. Choose to install Direct X 9.0c or you can directly go to next step;
4. Choose to install Windows Media Player 9.0 or you can directly go to next step;
5. Choose to install K-Lite Mega Codec or you can directly go to next step;
6. Click "install" to begin installation, if you want to change installation then click "skip step"
7.. Restart your computer; you can now use conversion tools freely.
Start:
Supported formats of common conversion:
Video:MPG, DAT, VOB, AVI, ASF, MOV, MP4, 3GP, WMV, RM, RMVB
Audio:MP3, AC3, APE, OGG, WAV, WMA, AAC, AIFF, AU, FLAC
Picture:JPG, TIFF, GIF, PNG, PCX, TGA, PBM, PPM, PGM, XPM

- 12 -
Steps:
1. Running SPCA5050 Transcoding application Tool.
Functions of above picture:
Add file:Select input file
Clear list:Clear file list
Browse:Select destination
Option:Setup parameters
Start:Start conversion
Stop:Stop conversion
Exit:Exit current mode of conversion
Help:Click to look help information
Progress bar: Display conversion progress
2. Click ”Add File”, then select input files (This software supports multi-selection).
3. If you want to set parameters for output file, please click ”Setting”.
Functions of picture:
Movie Encoder: XVID, MPEG4;
Frame Rate:15-30 (Frame rate:Number of displayed frame per second)

- 13 -
Quality:50-100(better the quality is, larger output file size will be)
Frame size: Frame size settings available are: 320x240, 352x288, 640x480, and
720x480
Encoder: MP3
Format:48kbps, 16000Hz, stereo
Caution:Output file will cover existing file which has same name in folder.
4. Click “Start”for file conversion.
General Malfunctions and solutions
1. Cannot Start up.
Player may be out of battery. Connect it to AC adapter, recharge for around 10 mn and try again.
2. Shut down automatically after start up.
a. Not enough power leads to auto-off.
b. “Auto-Off” function has been activated.
3. Cannot recharge.
Make sure AC adaptor is connected or plugged with jack. Be sure right adaptor is used.
4. Buttons do not work.
Press “RESET” to restart. If it still does not work, please take it to after sales department.
5. Data only read from SD card.
Set “Memory” in “Tool” as working area after SD card inserted.
6. Green light is on, but screen is off.
If light indicates green as working and screen doesn’t work, please use pinhole to reset.

- 14 -
TECHNICAL SPECIFICATIONS
Dimension 108mm*72mm*16.6mm
Weight 160g
Screen 4" TFT -LCD/480*272 RGB
Battery Built-In 1800mAH Lithium Battery
Adaptor 100~240V 50/60Hz AC input; 5V/2A DC output
Memory 512MB~8GB
SD Card 32MB~4GB
Format MP3,WMA,WAV
Bit Rate 32KB/S
Audio
Sampling Rate 16 / 24 / 32 / 44.1 / 48KHZ
Format ASF(MPEG-4), AVI(XVID)
Bit Rate 4 M bps Frame
Rate 30 frames/s
Video
Output NTSC/PAL dual
format Resolution 720*480
Flash Support Macromedia Flash Lite 2.1
S/N:30dB; 20 preset channels
Radio
87.5-108MHZ
JPEG/BMP/GIF/PNG , with functions of slide, background music and
image preview.
Picture
Pixel 8 Million Max File 3MB
E-book TXT(ANSI Unicode)File Size<4.0M, Support Bookmark
Video Recording Format ASF,
AVI
Format WAV(PCM, ADPCM) MP3
Sampling Rate 8KHz. 32Kbps/32KHz. 64K bps
Output 2.5mm stereo/video joint
Audio Recording
Input 2.5mm stereo/video joint
USB USB 2.0
Languages English, German, French, Italian, Spanish, Portuguese
Systems Windows 98/98SE/ME/2000/XP/VISTA – MAC OS
Other Features Calculator, Calendar
Table of contents
Other MEMUP Media Player manuals

MEMUP
MEMUP MEDIA DISK User manual

MEMUP
MEMUP Mediadisk TWX Series User manual

MEMUP
MEMUP MEDIAGATE HD User manual

MEMUP
MEMUP K-PEARL User manual

MEMUP
MEMUP MEDIADISK User manual

MEMUP
MEMUP MEDIADISK User manual

MEMUP
MEMUP V-SLIM User manual

MEMUP
MEMUP M26THD User manual

MEMUP
MEMUP M430TR Troubleshooting guide

MEMUP
MEMUP MEDIADISK User manual