Meowingtons PERCH TREE User manual

PERCH TREE CAT TOWER INSTRUCTIONS
NOTE: 2-person assembly required. It is suggested that you have a Building Buddy to help you assemble this tree (and maybe a glass of wine).
And no matter what your Building Buddy says, yes, you do need the instructions. If you’re more of a visual person, check out our instructional
video at https://www.meowingtons.com/pages/help
STEP 1
PARTS LIST
STEP 2 STEP 3 STEP 4
A –2PCS
2 –1PCS 3 –1PCS 4 –3PCS 5 –1PCS 6 –4PCS1 –2PCS
B –24PCS D –1PC E –1PC F –1PC G –1PCC –1PC
8mmX40mm 6mmX35mm 4.8mmX30mm 5mmX30mm 4mm
Insert Wooden Dowels (A) into
bottom of both Side Panels (1).
Holding Side Panels (1), Insert
Bolts (B) into bottom of Base
Platform (2) and into bottom-most
holes of Side Panels (1). Lightly
Tighten with Allen Wrench. Do not
overtighten bolts.
Insert Bolts (B) into the 2 bottom-
most holes on both Side Panels
(1) and attach to Support Bar (3).
Lightly tighten Bolts (B) with
Allen Wrench.
Starting at the bottom of tree
and working up, attach 3 Middle
Platforms (4) to both Side Panels
(1) using Bolts (B). Lightly tighten
Bolts (B) with Allen Wrench.

STEP 5 STEP 6 STEP 7
Attach Top Platform (5) to both Side Panels (1)
using Bolts (B).
Attach Sisal Mats (6) to three Middle Platforms
(4) and Top Platform (5) by aligning onto the
pre-attached Velcro strips.
Starting at the top of the Tree, COMPLETELY
TIGHTEN all Bolts (B). For your safety, also
install Wall Anchor Strap (H) by wrapping
Strap around the top branch of the tree.
Insert Screw Anchor (E) into wall. Then, insert
Anchor Bolt (D) and Washer (C) through Wall
Anchor Strap (H) and into Screw Anchor (E).
Ensure all parts are connected, securely locked into position, and the Sisal Mats (6) are smoothed down. Be sure to read below warnings and labels.
Need assistance? We’re here to help!
Call us TOLL FREE at 1-844-CAT-MEOW (228-6369)
or email us at [email protected].
View instructional video at
https://www.meowingtons.com/pages/help
WARNINGS & CAUTIONS
Keep all tools and instructions in a safe place for future reference.
Follow the instructions carefully and make sure to complete each step.
This cat tree is intended for cat use only, please keep children away.
Keep all small parts away from children/pets to avoid choking hazards.
Use Wall Anchor Strap to secure the cat tree to the wall.
Never climb, rock, shake, step, or hang on the cat tree.
Place your cat tree indoors, away from direct sunlight or damp areas.
Cat trees should be placed on a at, level surface for stability.
Check your cat tree often for loose screws or parts that might
need re-tightening.
If your cat tree gets torn or damaged, please discard it.
The product photo may vary slightly from your fully assembled cat tree as
this product is continually being enhanced.
●
●
●
●
●
●
●
●
●
●
●
PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS TO AVOID PET INJURY OR PROPERTY DAMAGES.
We’d love to see your cats enjoying the tree!
Please tag us in any photos on Instagram
@meowingtonsco and/or Facebook @MeowingtonsInc