Meridian DSW.2 User manual

4. CONNECTIONS
The following diagram shows the connections on the
underside of the subwoofer.
Digital Channel
Selector
Power Inlet
2
1+2
1
Input
Output
SpeakerLink
Channel
selector switch
SpeakerLink
output
Power Fuse
Use this connection To connect to this
SpeakerLink input The SpeakerLink output of a
Meridian Surround Controller,
Digital Pre-Amp, Digital Theatre
Controller, or the SpeakerLink
output of another DSP loudspeaker.
SpeakerLink output The SpeakerLink input of another
DSP loudspeaker in the same
daisy-chain as the DSW.2, or the
SpeakerLink input of another
DSW.2.
5. POWER UP THE DSW.2
Power Inlet
Power up the DSW.2 with the
supplied power cable.
This guide explains how to install the DSW.2 subwoofer. For
further information please visit:
meridian-audio.com/DSW2
1. UNPACKING
The DSW.2 weighs 22kg (48.4 lbs), so appropriate manual-
handling precautions should be taken when removing the
product from its carton.
Take care not to damage the outer finish of the DSW.2 while
handling the product.
The DSW.2 is supplied with the following accessories:
Power cord.
Three rubber foot inserts.
If any of these items is missing, please contact your dealer.
NOTE: You should retain the packaging in case you need to
transport the unit.
2. FIT THE RUBBER INSERTS
As supplied, the feet of the DSW.2
are suitable for soft carpeted
surfaces. To use the DSW.2 on a hard
surface, insert one of the supplied
self-adhesive rubber inserts into the
recess on each foot.
3. CONFIGURATION
The DSW.2 can be used in a variety of roles in a Meridian
system. This flexibility makes it necessary to configure one or
more of the Meridian products within the system in order for
the DSW.2 to perform as intended.
For further details of the configuration required see the
support pages for the DSW.2 and the other products in the
system on the Meridian website.
•
•
6. CHANNEL SELECTOR SWITCH
If the DSW.2 is installed in a two-channel system:
Set the channel selector switch as follows:
1left channel
2right channel
1+2 a balanced mix of left and right channels
If the DSW.2 is used to play the dedicated Mono or LFE
subwoofer channel from a Meridian Surround Controller:
Set the switch to 2.
If the DSW.2 is used to extend the bass of a single
loudspeaker or a pair of loudspeakers in a surround system:
Set the switch as follows:
1to extend a left-sided channel or the centre-channel
2to extend a right-sided channel
1+2 to extend a left and right pair of channels
If the DSW.2 is used with the Meridian 271 Digital Theatre
Controller
Refer to the documentation on the 271 support page on the
Meridian website.
7. FURTHER INFORMATION
To access the DSW.2 user guide,
datasheet, FAQs, and for further
product support, please visit:
meridian-audio.com/support/DSW2
Or, scan the QR code here.
input

SAFETY WARNINGS
Do not expose the unit to dripping or splashing.
Do not place any object filled with liquid, such as a vase, on the unit.
Do not place naked flame sources, such as lighted candles, on the unit.
TO AVOID OVERHEATING
Do not position the product in direct sunlight.
Do not position the product near heat sources, such as a radiator.
Leave at least 10cm around the product to ensure sufficient ventilation.
RADIO INTERFERENCE
FCC Warning: This equipment generates and can radiate radio
frequency energy and if not installed and used correctly in accordance
with our instructions may cause interference to radio communications
or radio and television reception. It has been type-tested and complies
with the limits set out in Subpart J, Part 15 of FCC rules for a Class B
computing device. These limits are intended to provide reasonable
protection against such interference in home installations.
EEC: This product has been designed and type-tested to comply with
the limits set out in EN55032:2015 and EN55024:2010 + A1:2015.
SPECIFICATIONS
PHYSICAL
Dimensions: Height = 445mm (450mm with rubber inserts fitted),
Width at base = 380mm, Depth at base = 430mm
Weight: 22kg
POWER
550W max
This product is available factory pre-set in the following voltage options:
100V AC 50-60Hz
110-120V AC 50-60Hz
220-240V AC 50-60Hz
Meridian Audio reserves the right to amend product specifications at
any time.
Copyright © 2019 Meridian Audio Ltd.
Part no: P88475/2
Designed and manufactured in the UK by Meridian Audio Ltd. Meridian
Audio reserves the right to make changes and improvements to any of the
products described in this document without prior notice.
VISIT US ON THE WEB
www.meridian-audio.com
•
•
•
•
•
•
•
•
•
IMPORTANT SAFETY INSTRUCTIONS
Read the instructions.
Keep these instructions.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Install only in accordance with the manufacturer’s instructions.
Refer all servicing to approved service personnel.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
This apparatus has been designed with Class 1 construction and
must be connected to a mains socket outlet with a protective earthing
connection (the third grounding pin).
This apparatus does not include a power switch. The apparatus may be
isolated from mains power either by unplugging the power connector from
the underside of the unit, or by unplugging the connector at the opposing
end of the power cord or cable from its supply outlet. As a result, either or
both of these connectors should remain accessible.
SAFETY WARNINGS
WARNING!
RISK OF ELECTRIC SHOCK – DO NOT OPEN
ATTENTION!
NE PAS OUVRIR – RISQUE DE DÉCHARGE ÉLECTRIQUE
Caution: to reduce the risk of electric shock, do not remove cover.
No user serviceable parts inside. Refer servicing to qualified service
personnel.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
IP20 EQUIPMENT
CLIMATE
The equipment has been designed for use in moderate climates and
in domestic situations.
Only use at an altitude not exceeding 2000m.
•
•
•
•
•
•
•
 
≤2000m
QUICK START
GUIDE
SUBWOOFER
DSW.2 DIGITAL ACTIVE