Merits P326A series User manual

P326D

LiNX Controller Operation
DK-REMD 11 Controller Operation(P326D)
Adjusting the Footrest Position(P326D)
39
14
12
10
8
15
16
17
18
18
18
18
18
19
20
25
26
34
47
49
50

When lift the seat, please pay attention to the
ForP326D
following:
1.Do notdrive off-road oron any uneven surfaced
roads.
2.Do not attempt to climb any curbs.
3.Do not attempt to cross any gap.
4.Do not attempt to climb any ramp.
5.Do not attempt to reclineover 105°.
Do not step on the footrest when mounting or
dismounting the unit. Failure to observe this may
tip the power chair forward and could result in
body injury.
ForP326D

driving outdoors

ramp
ramp
ramp

P326A

SEAT LIFT
P326D

Dynamic Shark 40A
PG VR2 40A
Dynamic LiNX 40A
Dynamic Shark 60A
P326A P326D
15.5"~19.5"(39~50cm)
22"~29.5"(56~75cm)
17"~21"(43~53cm)
21.5"~23.5"(55~60cm)
66kg (145 lbs)60kg (132 lbs)
P326A P326D

Seat Lift：Power seat elevator available.

For P326A
(1)Disconnect the controller plug.(Fig A)
(2)Lift seat up.(Fig C)
For P326D

For P326A
Please to refer P25.
For P326D

Footrest Position Adjustment (P326D)
(1) Put the Footrest in the tube.(Fig O)
(2) Put in the plug. (Fig O)
(3) Adjust the footrest to forward or backward,
and then tighten the knob. (Fig O)
Fig O
12
3