Merra ORC-R001-BR User manual
Massage Recliner Chair
User Manual
V20200446
Read Carefully Before Use
Keep For Future Reference
1
Safety Information
Parts List
Warning!
• DO NOT massage any part of the body that is painful, swollen, inflamed, or irritated without
first consulting your medical practitioner.
• DO NOT use this chair if any parts are missing or damaged. Have it repaired or replaced
before further use.
• Always ensure the chair is placed on flat level ground and is connected to a grounded
socket before usage.
• DO NOT place the chair in any excessively humid or wet environment to avoid risk of electrical
shock.
• DO NOT place the chair in direct sunlight or next to a heat source.
• DO NOT sit on the arms or back of the chair.
• Immediately turn off and unplug the device if it becomes uncomfortably hot or any function
does not turn off by using the remote control. Have the chair or remote repaired before
further use.
• DO NOT attempt to dismantle or repair the chair yourself. Contact customer service or
used trained electrical technicians for any service.
• Seat Base × 1
• Back Rest × 1
• Armrests × 2
• Remote Control × 1
• Power Cord × 1
• User Manual × 1
1. Slide the armrests onto the slats on either side of the base of the seat.
2
Assembly
Specifications
Materials
Input Voltage
Rated Frequency
Power Usage
Max. Incline
Swivel Range
Dimensions (L × W × H)
Weight Capacity
Net Weight
Plywood, High-Density Foam, Artificial Leather
100–240V
50–60Hz
10W
165°
360°
30–67 × 32 × 34–43 in. (75–170 × 81 × 86–108 cm)
331 lb. (150 kg)
95 lb. (43 kg)
2. Use the slats on the back of the seat base to slide on the back rest.
3
3. Make all electrical connections in the rear by matching the colors of the wires.
4. Plug the power cord directly into a grounded outlet.
4
The chair has a lever on its side which controls the incline. Pull the lever as you push back on the
back of the chair while sitting in it to recline. The leg rest will unfold simultaneously. When you
leave the chair, pull the lever while leaning forward, and the back and leg rest will automatically
return to their original positions.
The chair has 5 different massage modes with 8 vibrating nodes and a lumbar heater. All of these
are controlled with the provided remote.
Operation
Heating
On/Off
Vibration Intensity
High/Low
Mode Adjustment
Pulse/Press/Wave/Auto/Normal
Back Massage
On/Off
Lumbar Massage
On/Off
Thigh Massage
On/Off
Leg Massage
On/Off
Time Adjustment
15/30/60 Min.
Power
On/Off
Back Massagers
Lumbar Heater
Lumbar Massagers
Thigh Massagers
Leg Massagers
5
Thank you for choosing our products! If you have any questions or comments, contact us at
Contact Us
• Turn off and unplug the chair before cleaning.
• Periodically clean the chair and remote control of any dust that may accumulate with a soft
cloth. Do not use any liquids or chemicals.
• Periodically inspect the chair for any sign of wear or tear. Have any problems repaired or
replaced before further use. Do not repair the chair yourself. Contact customer service or use
a trained electrical technician.
• For best results, unplug and cover the chair if it will be unused for prolonged periods of time.
Maintenance
Table of contents
