
This product and its fixing parts are only suitable for installation on a plain
cement wall or stable unrendered brickwork. If the wall/brickwork shows cracks
you have to consult a professional.
Nobody is allowed to change the products’ design and structure without the
permission of manufacture or authorized deputy.
Please make sure that your hands are clean at the time of the assembly; otherwise you
may soil the awning fabric and frame.
Preparations
Make sure that no children and pets are present during mounting. They could get hurt by
lain out parts or tools.
Carefully remove the double folding screen awning from the box and remove the styrofoam
protectors from the double folding screen awning. Remove the plastic bags and plastic guards
from the double folding screen awning and carefully place the double folding screen awning aside
to avoid having it damaged by scratches or otherwise damaged or soiled during assembly. Check
the number of parts in the packaging whether the packing list requirements, the quality of parts
availability issues, if questions, please contact the supplier.
Be aware the sudden extension may occur during unpacking.
Tools needed for assembly:
✓Drill
✓Masonry drill bit, 14 mm and 10mm
✓Level
✓Wrench 10mm, 17 mm and 19 mm
✓Allen wrench 4mm
✓Tape measure
✓Chalk or marker pen
✓Wooden hammer
Mounting
Mounting on a concrete or brick wall
Please ask professionals for help if you are not sure
If your building has an exterior shell (such as insulation, double brick wall, brick facing),
installation should be taken out by a professional.
If the wall/brickwork shows cracks you have to consult a professional.
For safe and smooth installation think about where you will be securing the awning to
the wall before you start drilling holes.
Install the brackets:
Fix the screen:( the direction of the fixed can choose one of the following direction)