Metrologic MS9530 Series User manual

1.- Steps to link MS9530 Voyager RF with Base Station.
-Please read the following barcodes:
1º.-
Enter configuration
2º.- (*) Skip this step if you just want to change the link to another
Base station.
Following parameters are set:
-Base Station serial number :9999999999
-Voyager ID: 1
3º.-
Ready to read the new Serial number of Base Station to
send data to.
4º.- Read Base Station
serial number.
5º.-
Exit Configuration
2.- MS9530 Voyager RF ID:
- Up to five units can work together with same Base Station. It is requested that each of them
uses a different ID. Use this section to fix the desired ID.

3.- BASE STATION (WEDGE): PC connection
-Please read the following barcodes:
1º.-
2º.-
3º.-
4º.-
5º.-
6º.-
7º.-
8º.-
9º.-
3.- BASE STATION (RS-232: 9600,8,N,1 + CRLF)
-Please read the following barcodes:
1º.-
2º.-
3º.-
4º.-
5º.-
6º.-
7º.-
8º.-
9º.-