mFi DYLAN BED User manual

DYLAN BED FULL/QUEEN/E.KING SIZE
ASSEMBLY INSTRUCTIONS
PARTS ANDHARDWARE
PACKING CONFIGURATONS
BOX #1
A. HEADBOARD: 1PC BOX #2 B. FOOTBOARD 1PC.
BOX #3
C.SIDERAILS:2PCS D.SLATROLL:1SET
DYLAN BED
ASSEMBLED HARDWARE PACKEDINBOX #3
1.ALLEN BOLT
Ø8x50MM:8PCS 2. SPRING WASHERS M8xØ12x1.7:8PCS
4. SCREWØ4x30
MM:27 PCS
3. FLAT WASHERS
M8xØ19x1.7:8PCS
5.ALLEN KEY
M4x110:1PC
E. CENTER LEG: 4PCS F. CENTER SLAT SUPPORT: 1PC

STEP 1 STEP 2
STEP 4
A
C
C
1
23
5
PICTURE SIZE QTY.
M8x50 4
M8xØ12xt1.7 4
4
M8xØ19xt1.7
NO.
1
2
3
SIZE QTY.
M4x30 27
NO.
4
ATTACHTHE SIDE RAILS(C) TOTHEHEADBOARD(A)USING
TWOALLENBOLTS(1),SPRINGWASHERS(2)ANDFLAT
WASHERS (3), PER SIDE. DO NOT TIGHTEN BOLTS
COMPLETELY.
PICTURE SIZE QTY.
M8x50 4
M8xØ12xt1.7 4
4
M8xØ19xt1.7
NO.
1
2
3
1
23
5B
E
4
D
STEP 3
ATTACHTHEFOURCENTERLEGS(G)TOTHECENTERSLATSUPPORT
(F).
PICTURE
ATTACHTHEFOOTBOARD(B)TOTHESIDERAILASSEMBLY
USINGTWOALLENBOLTS,SPRINGWASHERSANDFLAT
WASHERS.TIGHTENALLFOURBOLTSANDBOLTSFROM
STEP1COMPLETELYUSINGALLENKEY(5).
F
ATTACHTHESLATSTOTHEBEDANDCENTERSLATSUPPORTUSING
THEPROVIDEDWOODSCREWS(4) [PHILIPSHEADSCREWDRIVERNOT
INCLUDED].
DYLAN BED FULL/QUEEN/E.KING SIZE
ASSEMBLY INSTRUCTIONS