mFi URBAN LOFT BED User manual

A
C
HARDWARE PACKED IN BOX #2
A.
A
C
C
D
E
C.
B.
B
D.
E.
HEADBOARD SIDERAILS
FOOTBOARD BED SLATS
LEG SUPPORT
HARDWARE BOX
1PC 2 PCS
1PC 3 PCS
3 PCS
TOOL REQUIRED :
PHILLIPS HEAD SCREW
DRIVER (NOT PROVIDED)
A
C
STEP 1 :
FIX ONE OF THE SIDERAILS ( ) TO THE
HEADBOARD ( )
C
ABY SLIDING IN THE HOOK
INSTALLED AT THE END OF THE SIDERAIL
( ) TO THE HEADBOARD ( ), AND PUSH
DOWN THE SIDERAIL ( ) TO SECURE THE
CONNECTION.
CA
C
PUSHING
DOWN
PARTS AND FITTING PACKAGING DETAIL
BOX #1
BOX #2
URBAN LOFT BED
FULL/QUEEN SIZE
ASSEMBLY INSTRUCTIONS
1
4
2
3
ROUND HEAD
SCREW 15MM
40MM
ALLEN BOLT
WOOD SCREW
8X30MMØ
ALLEN KEY
12
3
6
1
PCS
PCS
PCS
PC
URBAN LOFT BED ASSEMBLED
MODUS
FURNITURE
INTERNATIONAL
MFI
YOUR BOX
MAY CONTAIN
EXTRA HARDWARE
UPDATED : SEPTEMBER 27TH, 2010

A
B
C
C2
D
D
D
D
STEP 2 : STEP 3 :
FIX THE OTHER END OF
THE SIDERAIL ( ) TO
THE FOOTBOARD ( ).
C
B
FIX THE OTHER SIDERAIL ( )
TO THE HEADBOARD ( )
AND FOOTBOARD ( ).
C
A
B
STEP 4 :
SECURE BOTH SIDERAILS ( ) TO THE
HEADBOARD ( ) AND FOOTBOARD ( )
USING ROUND HEAD SCREWS ( )
AS SHOWN IN THE ILLUSTRATION.
C
AB
1
STEP 5 :
FOLLOW THE ILLUSTRATION TO PLACE THREE
BED SLATS ( ) ON THE BED FRAME AND
THE BED SLATS ( ) USING WOOD SCREWS ( ).
USE THE PILOT HOLES ON THE SIDERAILS ( ) AS
YOUR REFERENCE FOR EASY ASSEMBLY.
D
D2
C
SECURE
STEP 6 :
FOLLOW THE ILLUSTRATION TO
()
FIX THE LEG SUPPORT ( )
TO BED SLATS ( ) USING ALLEN BOLTS . USE
ALLEN KEY ( ) TO TIGHTEN THE BOLTS.
E
D
3
4
MAKE SURE ALL
BOLTS AND SCREWS ARE TIGHTENED BEFORE USING.
UPDATED : SEPTEMBER 27TH, 2010
INSTRUCTIONS FOR ADJUSTING
LEVELERS:
THE LEVELERS ARE LOCATED ON THE UNDERSIDE OF EACH
OF THE LEG SUPPORTS. PLEASE ADJUST THE LEVELERS
BY FOLLOWING THESE INSTRUCTIONS.
MAKE SURE THE LEVELERS ARE FLUSH WITH
THE BOTTOM EDGE OF THE POSTS
1
ADJUST THE LEVELERS BY TURNING UNTIL THE
LEG SUPPORTS MATCH EACH OTHER IN HEIGHT
2
1
1
A
C
A
B
DDD
E
E
C
3
4
D
E
A
B
C
A
B
C
C