MG BX-16G-1 User manual

BEFORE USE ....
Thank you for choosing us. Before use, please check con-
tents of the package you received as outlined below.
If you have any problems or questions with the product,
please contact our sales office or representatives.
■PACKAGE INCLUDES:
Standard rack mounting frame .........................................(1)
■MODEL NO.
Confirm Model No. marking on the product to be exactly
what you ordered.
■INSTRUCTION MANUAL
This manual describes necessary points of caution when
you use this product, including installation, connection and
basic maintenance procedures.
POINTS OF CAUTION
■ENVIRONMENT
• Indoor use.
• When heavy dust or metal particles are present in the
air, install the unit inside proper housing with sufficient
ventilation.
• Do not install the unit where it is subjected to continuous
vibration. Do not subject the unit to physical impact.
• Environmental temperature must be within -5 to +55°C
(23 to 131°F) with relative humidity within 30 to 90% RH
in order to ensure adequate life span and operation.
COMPONENT IDENTIFICATION
(Body side)
Specifications
STANDARD RACK MOUNTING FRAME
(without power distributor) MODEL BX-16G-1
EM-3832-A Rev.2 P. 1 / 2
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
INSTRUCTION MANUAL

TERMINAL CONNECTIONS
■EXTERNAL DIMENSIONS unit: mm (inch)
A
465 (18.31)
16.3 (.64)
99 (3.90)
50 (1.97)
2.3 (.91)
43
(1.69)
480 (18.90)
431 (16.97)
57.2 (2.25)
10 (.39)
SERIES
DIMENSIONS
A
*1. Dimensions in parentheses are for 7SN, 7LM, 7LMS
*2. Dimensions in parentheses are for VMS, VFX, JX Series
139 (5.47)
[163 (6.42)]
M-RACK
*1
137 (5.39) 163 (6.42)
[139 (5.47)] 162 (6.38)
H-RACK
B-RACK
W-RACK
*2
A-RACK
MOUNTING REQUIREMENTS unit: mm (inch)
450 (17.72)
4−M5
465 (18.31)
50 (1.97)
(JIS)
Mounting Angle
Note: Leave an appropriate amount of space below for wiring.
57.2 (2.25) (EIA)
15 (.59)
BX-16G-1
EM-3832-A Rev.2 P. 2 / 2
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN