Mi-Sol WS4000 User manual

LL
9
N

Handheld Anemometer
Instruction Manual
1. Introduction
This
Congratulations on purchasing this pocket-sized anemometer.
innovative product provides wind speed, wind chill and temperature
information for any outdoor activity. The operation of this product is simple
and straightforward and by reading this operating manual, users will receive
the
optimum
benefits
of all its
features.
2.
Inventory
of
contents
2.
1) 1x Anemometer
2)
1x Tripod
3)
1x 3V (CR2032) lithium cell
4)
1x
Instruction
manual
4)
3. Features
3.
1)
Wind
speed
measure
in
mph,
Km/h,
m/s,
ft/min
or
Knots
1)
Wind
speed
in
Beaufort
wind
scale
bar
graph
2)
3)
Wind chill display
4)
Temperature display in degrees
Fahrenheit
or
Celsius
5) Comfort level
5)
6)
LED backlight
7)
Low
battery
detection
and
display
7)
8) Landyard included
8)
9)
Unit
can
be
tripod
mounted

4. Setting up
63
set
Figure1
Figure 2
1)
First
use
a
large
coin
to
open
the
battery
cover
at
the
back
of
the
anemometer as indicated above.
2)
Checking
the
correct
polarization,
insert
1x
3V
(CR2032)
lithium
cell,
positive
(+)
pole
up
into
the
battery
compartment
and
replace
the
cover
as
figure 1.
3)
When
the
battery
is inserted, all
the
segments
of
the
LCD
and
backlight
will
light up briefly.
The anemometer can be tripod mounted as figure 2
5. Function keys:
The
anemometer uses
the
following
keys:
5.1 SET key:
In normal mode, press this key to toggle between wind speed
and temperature/wind chill display.
2

In setting mode, press this key can change set item, if now set
the last item, then press this key to out of setting mode.
Press
the
key
for
2s to
turn
on
the
backlight
for
8s.
Press the
key
for 3s to
power on/off
the
unit.
Press the
key
for
4s
to
clear the
history
data.
Press the key for 6s to enter the setting mode (default set item
is wind
speed unit).
5.2 +key
In the wind speed mode, press to change the display "WIND
-AWIND 0WIND".
In the temperature mode, press to switch temperature to wind
chill.
In the setting mode, press to change the setting value.
Press the key for 2s to turn on the backlight for 8s.
5.3 HOLD key:
In wind speed mode, press this key to hold the display for
current speed which just measured (in the hold mode, the
system do not fresh the display until out ofthis mode).
In hold mode, press this key to out of hold mode and back to
the speed mode.
6. Selection of operation mode
There are two modes, one is wind speed, and the other is temperature. By
pressing the "set" key the display will toggle between the two modes.
3

6.1 Wind Speed Mode
6)7)8 6 10 11]12) brt 67)8)9)10 11 12) bft
ft/min kts mph km/h m/s
67 8 9 10) 11) 12brt
ft/min kts mph km/h m/s
ft/min kts mph cm/h m/s
85.88898 88B.8
A wIND CHILL OLD)
COMFORT COoL cOLD EXTREME DANGER
WIND CHILL
COMFORT C0oL cOLD EXTREME DANGER
WIND CHILL HOLD
HOLD
COMFORT
COOL COL EXTREME DANGER
Current wind speed maximum wind speed average wind speed
The wind speed mode can be selected to 3 different display modes at any
time.
To toggle between current wind speed, maximum wind speed (AWIND) and
average wind speed(DWIND), simply press the "+" key
Wind speed measuring range
The wind speed measuring range is 1mph(0.3m/s) 67mph(30m/s), if the
speed
between
0.0m/s
and
0.3m/s,
the
wind speed
will
show
Om/s,and
if
the
speed over 30m/s,the wind speed will show "-"
10
1 12
bft In
the wind speed
mode
user can
press
the
1/radts mph krm/h ms HOLD key to hold on the display for the speed
3.S
Cthat
just
measured
as
below
picture.
System
does
not
fresh
the
display until
user
press
the
WIND CHILL HOLD key to back to the normal mode
COMFORT01
REME DANGER
Beaufort wind scale (bft)
The Beaufort scale is displayed in bar graph (0-12). This is a system for
estimating
wind
force
without
the
use
of instruments
based
on
the
visible
effects of the wind on the physical environment.
4

Beaufort scale
m/s kts
mph
km/h
ft/min
0
0-0.2
0-1
0-1
0-1
0-58
1
0.3-1.5 1-3 1-3 1-5
59-314
2
1.6-3.3 4-6 4-7
6-11 315-668
3 3.4-5.4
7-10
8-12
12-19
669-1082
4
5.5-7.9
11-16
13-18 20-28
1083-1574
5 8.0-10.7 17-21 19-24
29-38 1575-2125
6
10.8-13.8 22-27
25-31 39-49
2126-2735
7 13.9-17.1 28-33
32-38
50-61
2736-3385
8 17.2-20.7
34-40
39-46
62-74
3386-4093
9
20.8-24.4
41-47
47-54
75-88
4094-4822
10
24.5-28.4
48-55
55-63
89-102
4823-5609
11
28.5-32.6 56-63 64-72 103-117
5610-6417
12 32.6
>63
72
>117
>6417
6.2 Temperature mode
6 73D 10112 brt
6 7 8 9 10 11 12) btt
ft/min kts mph km/h m/s
ft/min
kts
mph
knm/h
m/s
4
WIND CHILL HOLD
DA WIND CHILL ROLD
GOMFORT COOL COLD EXTREME DANGER
COMFORT
cOOL
COLD
EXTRENE
DANGER
Wind chill
Temperature
5

In temperature mode, press the+ key to toggle between the temperature and
wind chill display,
Temperature measuring range
The unit measure the temperature every 10s ,and the measure range is from
-29.9 centigrade to +59 centigrade. If the temperature out of range, it display
". and
the wind chill also
display
""
Wind chill
The anemometer calculates automatically wind chil, which can provide
useful information for preparing outdoor activities in cold weather. "Wind chill"
provides an indication of how cold it feels given the combined effects of the
actual air temperature and the wind speed. Wind chill temperature is only
defined for temperatures at or below 50 °F(10 °C) and wind speeds above
4.8 kilometers per hour. Wind chill temperature will be the same as current
temperature above 50 °F(10 °C)
Comfort level
The bottom of the display will show you the comfort level:
Levels Temperature
Danger
-25°C or colder (-13°F or colder)
Extreme -10°C
to-24°C (14°F to -11°F)
Cold 10°C to -9°C (50°F to 15°F)
Cool
11°C to 19°C (52°F to 67°F)
Comfort
20°C to 26°C (68°F to 79°F)
6

7. Manual setting
Press the "set" key for 6s to enter the setting mode. After enter the setting
mode, other display will be empty except the set item, the icon wil lash at
2Hz.
In the setting mode, press the "set' key to set the following setting in
sequence,
press
"*
key to
select
the
unit
(1 Wind
speed
unit
in
m/s,
Km/h,
mph,
Knots or
tmin
(2)Temperature display unit in degree Celsius or Fahrenheit
(3)The sample time for average data (2 to 10for choose, default is 4)
DD9 1011 12 bt
ft/min kts mph kmíh m/s ft/min kts mph km/h mis
Ftimin kts mph kmuh. m/s
CBBH-088.8L88H
IND CHLI. oa
A WIND CHILL
WIND CHILL
CoMFORT CO0L cOLD EXTREME DANGER
COMFORT Gc0OL coLD EKTREME BANGER
COMFORT COL COLD EATRERE DANGER
Set speed unit Set temperature unit
Set average time
f no key operation in 15s, the unit will return to the normal mode
automatically.
8.Low battery display
6783:010 112 bft
The
unit
will
detect
the
voltage
of
battery
just
after
power
on.
In
normal
mode,
the
unit
detects
low
battery
every
1
minute.
In
power
off
mode
do
not
detect it,
if
the
battery
ft/min
kts
mph kim/h mls
895
Da
WIND
CHILL
HOL
COMFORT
COOL
COLD
EXTREME
DANGER
voltage
is
low,
the
icon
will
be
displayed.

9. Power ON/OFF
Press and hold down the "set" key for 3
seconds to switch the unit ON or OFF. In
EBF F
power off mode the unit will sleep and do not
detect the wind speed and temperature data,
WiND CHILI
all the history data will be cleared too.
OMFORT oo cot ERTRE DANGER
Note: The anemometer is automatically switched OFF when no key is
pressed and the wind speed is 0 in 10 minutes.
10. Specification
Recommended operating temperatures
-29.9°C to +59 C with 0.1 C
resolution
(-21.8 F to 138.2 "F with 0.2" resolution)
(""displayed if outside this range)
Temperature checking interval
every 10 seconds
Wind speed measuring range
Minimum 0.3 m/s (1 mph)
(Show
0
if wind speed <0.3m/s
Maximum 30 m/s (67 mph)
(Show if wind speed>30m/s)
Power source
1x 3V lithiumcell (CR2032)
Battery life
Approximately 12 months
Dimensions (L x Wx H)
50x 18x 140 mm (2" x 0.7" x 5.5")