Mia Moda Adora 808 User manual

ASSEMBLY
INSTRUCTIONS
ADORA COLLECTION BY MIA MODA
AI - 808-00

1. Crib End Left 1
3. Stabilizer Bar 1
4. Backboard 1
5. Metal matress support 1
7. Guard Rail (Not Included, Sold Separately) 1
8. Bed Rails (Not Included, Sold Separately) 2
6. Foot board 1
2. Crib End Right 1
AI-808-00
Mia Moda - 125 Helen St., South Plainfield, NJ 07080, Tel: [phone]
ASSEMBLY
INSTRUCTIONS
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please nd simple step-by-step instructions to help you quick assemble your product. Before you begin, we recommend
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
PART LIST

AI-808-00
1
2
4
3
5 6
ASSEMBLY
INSTRUCTIONS

 FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
 TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE
PLACED ON THEIR BACKS TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.
 CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR
SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.
 DO NOT USE THIS CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT
MIA MODA - 125 HELEN STREET S. PLAINFIELD NJ 07080 FOR REPLACEMENT PARTS.
 DO NOT USE A WATER MATTRESS WITH THIS CRIB.
 READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR
FUTURE USE.
 IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
STRANGULATION HAZARD:
 STRINGS CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A
CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS
OVER A CRIB OR ATTACH STRINGS TO TOYS.
 TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS
OF BODY OR CLOTHING ON LOOSE FASTENERS.
 DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES
MAY STRANGLE A CHILD.
 INFANTS CAN SUFFOCATE ON SOFT BEDDING.
 NEVER ADD A PILLOW, COMFORTER OR PADDING.
 NEVER PLACE ADDITIONAL PADDING UNDER INFANT.
 NEVER USE PLASTIC SHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS,
BECAUSE THEY CAN CAUSE SUFFOCATION.
 INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS
TOO SMALL. ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN (69 CM)
BY 51-5/8 IN (131 CM), WITH A THICKNESS NOT EXCEEDING 6 IN (15CM) AND A MINIMUM
THICKNESS OF 4 IN (10 CM). THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN
FROM SEAM TO SEAM OR EDGE TO EDGE WHERE APPROPRIATE.
FALL HAZARD
 WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST
POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT
COULD SERVE AS STEPS FOR CLIMBING OUT.
AFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURE (DISREGARD FOR NON-DROP
SIDE CRIB).
 DO NOT LEAVE CHILD IN CRIB WITH SIDES LOWERED. BE SURE SIDE IS IN RAISED AND
LOCKED POSITION WHENEVER CHILD IS IN CRIB (DISREGARD FOR NON-DROP SIDE CRIB).
 STOP USING CRIB WHEN CHILD BEGINS TO CLIMB OUT OR REACHES THE HEIGHT
OF 35 IN (89 CM).
 WHEN STORING CRIB USE CAUTION AS EXTREME CHANGES IN TEMPERATURE OR HUMIDITY
CAN COMPROMISE THE CRIB MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.
 USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY
FROM THE CRIB AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS
OF HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRIB.
 AVOID USING VAPORIZERS AND HUMIDIFIERS FOR PROLONGED PERIODS OF TIME.
 FOLLOW WARNINGS ON ALL PRODUCTS IN CRIB.
WARNING!
BULLETIN NO. WC01-04

AI-808-00
HARDWARE AND TOOL DIAGRAM
(3-1/4”)
X 4X 4
X 6 (1-1/8”)
X 6
X 4
X 1
X 4 (3/4”)
X 12 (1-3/8”)
A B
C
E
G
H
D
F
6

AI-808-00
(3-1/4”)
X 4
A
A
H
1
2
3
STEP 1
7

AI-808-00
X 6 (1-3/8”)
C
C X 3
C X 3
4
STEP 2
8

AI-808-00
X 4
X 4 (3/4”) B
D
3
ASSEMBLY
INSTRUCTIONS
5
B
D
7
STEP 3
9

AI-808-00
X 6 (1-3/8”)
C
ASSEMBLY
INSTRUCTIONS
6
C X 3
C X 3
F
STEP 4
10

AI-808-00
X 6
G
X 6 (1-1/8”)
E
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
6
E x 3
E x 3
G x 6
Day Bed Conversion
11

AI-808-00
Toddler Bed Conversion
X 1 Guard Rail (Not Included, Sold Separately)
7
Model shown is example only.
Styles may vary.
WARNING
WHEN CONVERTING THIS CRIB TO A TODDLER BED,
A GUARD RAIL MANUFACTURED BY MIA MODA INC., MUST BE USED.
In order to convert your crib to a toddler bed,
you must first remove the front rail of the crib,
then attach the guard rail using the bolts
from the front rail removal.
NOTE: Make sure the mattress support is in the lowest
position.
Please follow the complete instructions that
come with the guard rail which is sold separately.
ASSEMBLY
INSTRUCTIONS
12

AI-808-00
Full Size Bed Conversion
8 X 2 Bed Rails (Not Included, Sold Separately)
13

BULLETIN NO. AI-808-00
 FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT OR STRANGULATION.
 DO NOT PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES
MAY STRANGLE A CHILD.
 THE MATTRESS INTENDED FOR USE ON THIS BED SHALL BE A FULL-SIZE CRIB
MATTRESS HAVING THE DIMENSIONS OF 51-5/8 IN (1310 MM) IN LENGTH AND
27-1/4 IN (690 MM) IN WIDTH AND THICKNESS OF 4 IN (100 MM) OR A GREATER
THICKNESS AS SPECIFIED BY THE MANUFACTURER.
 THE MINIMUM AGE OF THE INTENDED USER SHALL NOT BE LESS THAN 15 MONTHS
AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50 LBS. (22.7 KG).
WARNING!
For Toddler Bed Use