Miboxer FUT103Z User manual

GU10 RGB+CCT LED Spotlight
(Zigbee 3.0)
1. Features
Φ50mm
57mm
GU10 RGB+CCT LED Spotlight
(Zigbee 3.0)
Model No.: FUT103Z
Subordinate New Brand
Model No.: FUT103Z
Power: 4W
Working Temp.: -10~40°C
Voltage: 100-240V~ 50/60Hz
Color Temp.: 2700K~6500K
Light Efficiency: 70LM/W
Luminous Flux: 280LM
CRI: ＞80 PF: 0.55
Lifespan: 50000h
Beam Angle: 25°
Control Distance: 100m (open area)
Size: Φ50*57mm
This item supports zigbee 3.0 standard
protocol with low consumption, strong ability
to pair with network automatically and resist
interference.
2. Instructions
Put the light in the suitable lighting fixture.
Attention:
For lights with a weight significantly higher than
that of the lights for which they are a replacement,
attention should be drawn to the fact that the
increased weight may reduce the mechanical
stability of certain luminaires and lampholders
and may impair contact making and light
retention.
Dim brightness/
saturation
16 Millions of
colors to choose
Zigbee 3.0 remote control
Control distance 100m (open area)
Support third party voice control
(
Zigbee 3.0 gateway is needed)
Smartphone App control
( Zigbee 3.0 gateway is needed)
Zigbee 3.0
Product follow Zigbee 3.0
standard protocol
Color temperature
2700K~6500K

Attention:
1. Remote only match or dismatch with one light in
one time, it will match or dismatch with the nearest
light.
2. Remote doesn't pair with gateway:
One light is only controlled by one remote.
3. Light doesn't pair with gateway:
It can not be controlled by remote which already
paired with gateway.
4.
If remote and light both connected with gateway:
One light can be controlled by many remotes.
4. Match and Dismatch with zigbee 3.0 remote
stay closer distance between the light and remote
(1) Connect with power supply.
(2) Ensure the light is always on ( please wait 5
seconds and turn off, turn on again 1 time if the
light is in red color with breathe ambience).
(3) Long press group control " " button with 3
seconds untill the indicator of remote flash
quickly ( check details in remote instruction).
(4) Please keep closer for remote and the light
which you want to connect ( within 1 meter).
(5) Matching is done if the light breathe 3 times.
(1) Connect with power supply.
(2) Ensure the light is always on.
(3) Long press group control " " button with 3
seconds untill the indicator of remote flash slowly
(check details in remote instruction).
(4) Please keep closer for remote and the light which
you want to connect ( within 1 meter).
(5) Dismatching is done if the light breathe 3 times.
4.1 Instruction of Matching
4.2 Instruction of Dismatching
Please repeat above steps if you are failed
Remote
The remote doesn't pair
with zigbee gateway
The remote paired with
zigbee gateway
Support match and
dismatch light
Light
Only support match and
dismatch light which
connected with same
gateway
1. Connect with power supply.
2. Turn on/off light continuously over 3 times , confirm
the light with red color in breathe ambience.
3. Open [ MiBoxer Smart ] App and add sub-device
(see following screenshot).
4. You can dim light, group control and ambience
control after adding device completely.
3. How to control the light via phone App?
Please add zigbee 3.0 gateway to [ MiBoxer Smart ]
App firstly
Made in China
Light can not use in
humid area
Warning
1. Ensure voltage is 100-240V~.
2. Please turn off power supply while install the light.
3. Stay away from high temperature and humid area.