Miboxer SL1-12 User manual

Model No.: SL1-12 / SL2-12 / SL3-12 / SL4-12
3W LED Spotlight
Subordinate New Brand
1. Product Feature 2. Product Parameters
Model No.: SL1-12 / SL2-12 / SL3-12 / SL4-12
Input Voltage: DC12V
Power: 3W
Beam Angle: 36°
IP Rate: IP66
Working Temp.: -10~40°C
MateriaI: ALuminum
Hole Size: ∅33~36mm
1. It can be used with Miboxer controller.
2. The shell is made by high-quality automotive aluminum
precision processing, which shows exquisite appearance,
smooth hand feeling and advanced waterproof technology
after surface treatment.
It can be used with Miboxer controllers:
·Small size
·Can be extended in series
·Waterproof
52mm
36mm
∅42mm
FUT035W~FUT038WFUT035S~FUT038S FUT035Z~FUT038Z
SET
FUT035M~FUT038M
FUT035~FUT038
POWER2
POWER1
WL5
SETIndicator light
INPUT
V+RGBCW V+RGBW V+RGB V+CWCW
OUTPUT
WWWW
WW
V+WWWWW

3. Connection Diagram
5. Instructions
6. Attention
Need to use with ( Single Color, Dual White, RGB, RGBW ) LED
controller (purchase separately)
Red:
Black:
Model No.: SL1-12
Red:
Black:
Yellow:
4. Wiring instructions
Up to 20 lights
can be connected
Up to 20 lights
can be connected
Input: DC12V
LED Controllers
Made in China
1. Please check if input voltage is DC12V, otherwise devices will be damaged.
2. It is forbidden to cover or wrap metal parts of lights with plastic or EVA insulation materials, which will affect heat dissipation of lights.
3. Non-professional users are not allowed to disassemble the equipment directly, otherwise the equipment may be damaged.
1. Open the hole according to picture 1 (opening size: ∅33-36mm)
2. Connect lights according to connection diagram.
3. Make spring buckles on both ends of product upright and put them into holes.
IP66
IP Rate
1
Ceiling
243
LEDV+
LEDV-
Model No.: SL2-12
V+
CW
WW
Yellow:
Red:
Green:
Blue:
Model No.: SL3-12
V+
R
G
B
Black:
Red:
Green:
Blue:
Yellow:
Model No.: SL4-12
V+
R
G
B
W