Microdigital MDC-H4090C User manual

TOTAL SECURITY G SOLUTION
Full HD 1080P 2.1 Mega Pixel
CMOS HD-SDI Camera
www.microdigital.co.kr
USER MANUAL
Design and specifications are subject to change without notice.
Ver.120111E
www.microdigital.co.kr
[email protected]
#1212, Hoseodae Venture Tower,
319, Gasan-Dong, Geumcheon-Gu, Seoul, Korea
Tel :[phone] / Fax :[phone]
P/N : 3690-0003A

2 MICRODIGITAL
• This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
◆Information
• Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• This installation should be made by a qualified service person and should abide
to all local codes.
◆Warning
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.
REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environ-
ment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
CAUTION
USER INFORMATION

MICRODIGITAL 3
• This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
◆Information
USER INFORMATION
• Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• This installation should be made by a qualified service person and should abide
to all local codes.
◆Warning
RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.
REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environ-
ment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.

4 MICRODIGITAL
PRECAUTIONS
• Do not install the camera
in extreme temperature
conditions.
Only use the camera under conditions where
temperatures are between -10°C and +50°C.
Be especially careful to provide ventilation
when operating under high temperatures.
• Do not install or use the cam-
era in an environment where
the humidity is high.
It can cause the image quality to be poor.
• Do not install the camera
under unstable lighting
conditions.
Severe lighting change or flicker can cause
the camera to work improperly.
• Do not touch the front lens of
the camera.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints
on the lens cover.
• Do not drop the camera
and protect it from physical
shocks.
It can cause malfunctions to occur.
• Never keep the camera
pointed directly at strong
light.
It can damage the CCD.
• Do not expose the camera to
rain or spill beverage on it.
If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the
electronic components.
• Do not expose the camera to
radioactivity. If exposed to radioactivity the CCD will fail.
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates “No Disas-
sembling.”
NOTE
•Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
• Ensure that the power source complies with normal specifications before supplying it to
the camera.
•Power supply.(Adaptor : DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
•Monitor Impedance.
- Set the impedance switch to 75ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred. In this
case, just check the position of the monitor impedance switch.
USER INFORMATION

MICRODIGITAL 5
• Do not install the camera
in extreme temperature
conditions.
Only use the camera under conditions where
temperatures are between -10°C and +50°C.
Be especially careful to provide ventilation
when operating under high temperatures.
• Do not install or use the cam-
era in an environment where
the humidity is high.
It can cause the image quality to be poor.
• Do not install the camera
under unstable lighting
conditions.
Severe lighting change or flicker can cause
the camera to work improperly.
• Do not touch the front lens of
the camera.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints
on the lens cover.
• Do not drop the camera
and protect it from physical
shocks.
It can cause malfunctions to occur.
• Never keep the camera
pointed directly at strong
light.
It can damage the CCD.
• Do not expose the camera to
rain or spill beverage on it.
If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the
electronic components.
• Do not expose the camera to
radioactivity. If exposed to radioactivity the CCD will fail.
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates “No Disas-
sembling.”
USER INFORMATION
NOTE
•Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
•
Ensure that the power source complies with normal specifications before supplying it to
the camera.
•Power supply.(Adaptor : DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
•Monitor Impedance.
- Set the impedance switch to 75ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred. In this
case, just check the position of the monitor impedance switch.

6 MICRODIGITAL
• DESCRIPTION 8 - 10
• SPECIFICATION 11 - 13
• FEATURES 14 - 15
• COMPONENTS 16 - 29
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
16 - 18
19 - 23
24 - 26
27 - 28
• INSTALLATION 29 - 34
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
29 - 30
31
32
33 - 34
• OSD OPERATION 35 - 42
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
35
36 - 37
38
38
• INSTRUCTIONS 40
• OSD STRUCTURE 41
CONTENTS

MICRODIGITAL 7
CONTENTS
•MODEL 43
• EXPOSURE 44
• WHITE BALANCE 47
• IMAGE 48
• INTELLIGENCE 50
• SPECIAL FUNC 51
• DISPLAY 53
• OSD STRUCTURE-MAIN MENU

8 MICRODIGITAL
Before operating the camera, confirm the camera model and proper input
power voltage. In order to help you understand this manual thoroughly,
we’ll introduce our model description.
◆MODEL DESCRIPTION
MDC - H8220 - TDN - 30 HU
H 8 2 2 0
Built in Heater / UTC
Number of IR-LED
Day / Night
Filter mechanism
Power source
Number of Pixels
B/W(1) / Color(2)
Case type
Model type
• EX)
CASE TYPE MODEL
TYPE
COLOR PIXEL POWER D/N
LENS
IR/HEATER
/ CASE
1: MINI BULLET
2: MODULE
3: MINI SQUARE
4: BOX
5: ZOOM
6: IR BULLET
7: IN DOOR
DOME
8: OUT DOOR
DOME
(VANDAL)
9: MINI VANDAL
i : IP
H : HD
1: B/W
2: COLOR
1: 270K
2: 410K
6: 1.3M
9: 2.1M
0: DC 12V
1: DUAL
VOLTAGE
(DC 12V/
AC24V)
2: AC230V
C
CTD
CDN
F
FDN
TDN
V
VX
VTD
VDN
WDN
F(E)
V(E)
IR : No. of
IR-LED
H: With Heater
U : UTC
CONTROL
MS : SUFACE
MOUNT TYPE
MF : FLUSH
MOUNT TYPE
IR & HEATER (MDC-6xxx, 7xxx, 8xxx MODEL)
-H -U
Built-in Heater UTC Remote Control
-30 -30H
Built-in IR LED Built-in IR LED
With Heater
DESCRIPTION

MICRODIGITAL 9
DESCRIPTION
Before operating the camera, confirm the camera model and proper input
power voltage. In order to help you understand this manual thoroughly,
we’ll introduce our model description.
Built in Heater / UTC
Number of IR-LED
Day / Night
Filter mechanism
Power source
Number of Pixels
B/W(1) / Color(2)
Case type
CASE TYPE MODEL
TYPE
COLOR PIXEL POWER D/N
LENS
IR/HEATER
/ CASE
1: MINI BULLET
2: MODULE
3: MINI SQUARE
4: BOX
5: ZOOM
6: IR BULLET
7: IN DOOR
DOME
8: OUT DOOR
DOME
(VANDAL)
9: MINI VANDAL
i : IP
H : HD
1: B/W
2: COLOR
1: 270K
2: 410K
6: 1.3M
9: 2.1M
0: DC 12V
1: DUAL
VOLTAGE
(DC 12V/
AC24V)
2: AC230V
C
CTD
CDN
F
FDN
TDN
V
VX
VTD
VDN
WDN
F(E)
V(E)
IR : No. of
IR-LED
H: With Heater
U : UTC
CONTROL
MS : SUFACE
MOUNT TYPE
MF : FLUSH
MOUNT TYPE
IR & HEATER (MDC-6xxx, 7xxx, 8xxx MODEL)
-H -U
Built-in Heater UTC Remote Control
-30 -30H
Built-in IR LED Built-in IR LED
With Heater
Heater
Heater
IR
LED
IR
LED

10 MICRODIGITAL
PRECAUTIONS
POWER SOURCE
MDC-xxx0
- DC 12V
MDC-xxx1
- AC 24V / DC 12V, Dual-Power
MDC-xxx2
- AC 230V
AC 230V
AC 24V
DC 12V
DC 12V
DAY / NIGHT FILTER & MECHANISM
C F
DIGITAL DAY / NIGHT DIGITAL DAY / NIGHT
CTD
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
V
DIGITAL DAY / NIGHT
VTD
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
DAY / NIGHT
DAY / NIGHT DAY / NIGHT
DAY / NIGHT
LENS
Fixed
Fixed
DC Auto
Iris Lens
DAY / NIGHT
DC Auto
Iris Lens
FILTER CHANGE
FILTER CHANGE
LENS
VARIFOCALVARIFOCAL
LENS
VARIFOCALVARIFOCAL
Image Sensor 1/3" Panasonic CMOS
Total Pixels 2010(H) x 1108(V) = 2,227,080 (pixel)
Active pixels 1944(H) x 1092(V) = 2,122,848 (pixel)
Scanning system Progressive
Resolution Digital : 1920x1080p(1080p/30fps)
1280x720p(720p/60fps) Analog : 700TVL
Min. illumination Color : 1.0 lux , BW : 0.5lux
Color DSS : 0.002 lux , BW DSS : 0.001 lux
Video Output HD-SDI / Analog : NTSC, PAL(without WDR)
S/N Ratio more than 50dB (AGC off)
Function
MODE D&N / COLOR / IR SMART / IR CDS
EXPOSURE
BRIGHTNESS 0 ~ 20 steps
LENS DC / Manual
SHUTTER Auto / Manual ( 1/30(1/25) ~ 1/60000 )
DSS Off / x2 / x3 / x4
AGC Off / On
WDR/BLC Off / WDR / BLC
DAY&NIGHT Auto / Day / Night / Ext
SMART IR Off / On
WHITE BAL Auto / Push / Manual / Indoor / Outdoor
IMAGE
SHARPNESS 0 ~ 10 steps
MIRROR Off / H / V / H&V
FREEZE Off / On
D.ZOOM x1 ~ x32
HLC Off / On
ACE Off / On
DNR Off / Low / Middle / High / Auto
D.COMPRESS Off / On
DESCRIPTION

MICRODIGITAL 11
POWER SOURCE
MDC-xxx0
- DC 12V
MDC-xxx1
- AC 24V / DC 12V, Dual-Power
MDC-xxx2
- AC 230V
SPECIFICATION
DAY / NIGHT FILTER & MECHANISM
C F
DIGITAL DAY / NIGHT DIGITAL DAY / NIGHT
CTD
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
V
DIGITAL DAY / NIGHT
VTD
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
Image Sensor 1/3" Panasonic CMOS
Total Pixels 2010(H) x 1108(V) = 2,227,080 (pixel)
Active pixels 1944(H) x 1092(V) = 2,122,848 (pixel)
Scanning system Progressive
Resolution Digital : 1920x1080p(1080p/30fps)
1280x720p(720p/60fps) Analog : 700TVL
Min. illumination Color : 1.0 lux , BW : 0.5lux
Color DSS : 0.002 lux , BW DSS : 0.001 lux
Video Output HD-SDI / Analog : NTSC, PAL(without WDR)
S/N Ratio more than 50dB (AGC off)
Function
MODE D&N / COLOR / IR SMART / IR CDS
EXPOSURE
BRIGHTNESS 0 ~ 20 steps
LENS DC / Manual
SHUTTER Auto / Manual ( 1/30(1/25) ~ 1/60000 )
DSS Off / x2 / x3 / x4
AGC Off / On
WDR/BLC Off / WDR / BLC
DAY&NIGHT Auto / Day / Night / Ext
SMART IR Off / On
WHITE BAL Auto / Push / Manual / Indoor / Outdoor
IMAGE
SHARPNESS 0 ~ 10 steps
MIRROR Off / H / V / H&V
FREEZE Off / On
D.ZOOM x1 ~ x32
HLC Off / On
ACE Off / On
DNR Off / Low / Middle / High / Auto
D.COMPRESS Off / On

12 MICRODIGITAL
▶Specifications are subject to change without prior notice due to improvement
MDC-H4090C
LENS C/CS Mount Without TDN Mechanism
Power Consumption Max. 2.1W(at 12V)
MDC-H4090CTD
LENS C/CS Mount With TDN Mechanism
Power Consumption Max. 2.1W(at 12V)
MDC-H6290VTD-45
Built in TDN YES
Lens Filter Changeable Vari-Focal 6.0~50.0mm DC Auto
Iris Lens
IR LED 12pcs Giant & 30pcs IR-LED
Power Consumption Max. 7.5W(at 12V)
MDC-H6290VTD-48
Built in TDN YES
Lens Filter Changeable Vari-Focal 3.5~16.0mm DC Auto
Iris Lens
IR LED 48pcs Include
Power Consumption Max. 7.3W(at 12V)
MDC-H8290VTD
Built in TDN YES
Lens Filter Changeable Vari-Focal 3.5~16.0mm DC Auto
Iris Lens
Power Consumption Max. 2.1W(at 12V)
INTELLIGENCE
PRIVACY Off / On (32 points)
MOTION Off / On (4 points)
SPECIAL FUNC
SHADING DET Off / On
SHADING Off / On
DEFECT DET Off / On
DEFOG Off / On
SYSTEM NTSC / PAL
HD FORMAT 1080P / 720P
PG Off / On
CVBS Off / On
COMM
ID (1 ~ 255)
BAUDRATE ( 2400 / 4800 / 9600 / 19200 / 38400 /
57600/115200 )
PROTOCOL (PELCO-P / PELCO-D / UPDATE)
DEFAULT ON / DONE
Language English
OSD Text 0 ~ 9, A ~ Z, a ~ z
Electrical
Power Source DC12V±10%
General
Operating Temperature -10°C ~ +50°C (Humidity : 0%RH ~ 80%RH)
Storage Temperature -20°C ~ +60°C (Humidity : 0%RH ~ 90%RH)
SPECIFICATION

MICRODIGITAL 13
SPECIFICATION
▶Specifications are subject to change without prior notice due to improvement
MDC-H4090C
LENS C/CS Mount Without TDN Mechanism
Power Consumption Max. 2.1W(at 12V)
MDC-H4090CTD
LENS C/CS Mount With TDN Mechanism
Power Consumption Max. 2.1W(at 12V)
MDC-H6290VTD-45
Built in TDN YES
Lens Filter Changeable Vari-Focal 6.0~50.0mm DC Auto
Iris Lens
IR LED 12pcs Giant & 30pcs IR-LED
Power Consumption Max. 7.5W(at 12V)
MDC-H6290VTD-48
Built in TDN YES
Lens Filter Changeable Vari-Focal 3.5~16.0mm DC Auto
Iris Lens
IR LED 48pcs Include
Power Consumption Max. 7.3W(at 12V)
MDC-H8290VTD
Built in TDN YES
Lens Filter Changeable Vari-Focal 3.5~16.0mm DC Auto
Iris Lens
Power Consumption Max. 2.1W(at 12V)
INTELLIGENCE
PRIVACY Off / On (32 points)
MOTION Off / On (4 points)
SPECIAL FUNC
SHADING DET Off / On
SHADING Off / On
DEFECT DET Off / On
DEFOG Off / On
SYSTEM NTSC / PAL
HD FORMAT 1080P / 720P
PG Off / On
CVBS Off / On
COMM
ID (1 ~ 255)
BAUDRATE ( 2400 / 4800 / 9600 / 19200 / 38400 /
57600/115200 )
PROTOCOL (PELCO-P / PELCO-D / UPDATE)
DEFAULT ON / DONE
Language English
OSD Text 0 ~ 9, A ~ Z, a ~ z
Electrical
Power Source DC12V±10%
General
Operating Temperature -10°C ~ +50°C (Humidity : 0%RH ~ 80%RH)
Storage Temperature -20°C ~ +60°C (Humidity : 0%RH ~ 90%RH)

14 MICRODIGITAL
1/3” Progressive CMOS 2.1M pixels Image Sensor
- 2,227,080pixels(Total) / 2,122,848pixels(Active)
Full HD Resolution
- 1920x1080p / 30fps - 1280x720p / 60fps
DAY / NIGHT
The camera identifies whether it is day or night and automatically switches
to the appropriate mode, depending on its environment. By day, the camera
switches to color mode in order to maintain optimal color. At night, it switches
to B/W mode so as to obtain better picture definition.
WDR (Wide Dynamic Range)
D-WDR is a powerful and ultra advanced technology that captures clear and
superior high Resolution pictures even where images appear dark because
there is a strong back light present.
DNR (Digital Noise Reduction, 2D+3D)
The DNR technology eliminates noise thus generating a distinct and clear
image. This camera DNR function utilizes both an adaptive 2D filter reducing
noise in the brightness of the image and an adaptive 3D filter reducing noise
caused by movement.
HLMASK (HLC, High Light Compensation) Function
High Spotlight BLC Function is Especially Effective to Read the Number Plate
of the Vehicles in the Street or Parking Lot at Night Time. Especially Users
Can Adjust and Select the Special Required Area to Observe the Target Object
Under the Strong Spots of Light Exist.
DIGITAL ZOOM
Digital zoom available, OFF(x1) / ON(x2~x32) can be selected
Additional Functions
1. OSD - On Screen Display menu
- the camera can be controlled by selecting text displayed on the
monitor screen.
2. Free Area Selectable function of Intelligent Motion Detection
3. Privacy Color Masking for 32 Area selection
DAY / NIGHT
2D+3DNR
2.1M Full HD
HLC
OSD
DPC (Dead Pixel Compensation [Max 64points])
When the camera becomes hot after operating a couple of days, white
spots are shown on the screen especially at low light condition and they are
recorded together with normal image. By using thise function, white spots
are removed and you can get clean images.
IR SMART
It enables users to distinguish the indistinguishable images saturated by
IR LED.
C / CS Mount Lens Adjustable
MDC-H4290C & CTD MODEL
External Focus & Focal Length Adjustment
77Ø, 88Ø Series (MDC-6220TDN-45, 48)
Dual(Surface / Flush) Mount Type Vandal Proof Dome Camera
MDC-H8290VTD MODEL
1. The unit is installed by two types of installation with flush or surface
mount. When the camera is installed with flush mount, the unit can be
installed into an existing two-gang junction box.
2. Surface or Flush Mounting using the supplied surface mount bracket.
Weather proof IP66
MDC-H6290VTD , MDC-H8290VTD MODEL
IP66
Vandal Proof
SMART
IR
FEATURES

MICRODIGITAL 15
1/3” Progressive CMOS 2.1M pixels Image Sensor
- 2,227,080pixels(Total) / 2,122,848pixels(Active)
Full HD Resolution
- 1920x1080p / 30fps - 1280x720p / 60fps
DAY / NIGHT
The camera identifies whether it is day or night and automatically switches
to the appropriate mode, depending on its environment. By day, the camera
switches to color mode in order to maintain optimal color. At night, it switches
to B/W mode so as to obtain better picture definition.
WDR (Wide Dynamic Range)
D-WDR is a powerful and ultra advanced technology that captures clear and
superior high Resolution pictures even where images appear dark because
there is a strong back light present.
DNR (Digital Noise Reduction, 2D+3D)
The DNR technology eliminates noise thus generating a distinct and clear
image. This camera DNR function utilizes both an adaptive 2D filter reducing
noise in the brightness of the image and an adaptive 3D filter reducing noise
caused by movement.
HLMASK (HLC, High Light Compensation) Function
High Spotlight BLC Function is Especially Effective to Read the Number Plate
of the Vehicles in the Street or Parking Lot at Night Time. Especially Users
Can Adjust and Select the Special Required Area to Observe the Target Object
Under the Strong Spots of Light Exist.
DIGITAL ZOOM
Digital zoom available, OFF(x1) / ON(x2~x32) can be selected
Additional Functions
1. OSD - On Screen Display menu
- the camera can be controlled by selecting text displayed on the
monitor screen.
2. Free Area Selectable function of Intelligent Motion Detection
3. Privacy Color Masking for 32 Area selection
FEATURES
DPC (Dead Pixel Compensation [Max 64points])
When the camera becomes hot after operating a couple of days, white
spots are shown on the screen especially at low light condition and they are
recorded together with normal image. By using thise function, white spots
are removed and you can get clean images.
IR SMART
It enables users to distinguish the indistinguishable images saturated by
IR LED.
C / CS Mount Lens Adjustable
MDC-H4290C & CTD MODEL
External Focus & Focal Length Adjustment
77Ø, 88Ø Series (MDC-6220TDN-45, 48)
Dual(Surface / Flush) Mount Type Vandal Proof Dome Camera
MDC-H8290VTD MODEL
1. The unit is installed by two types of installation with flush or surface
mount. When the camera is installed with flush mount, the unit can be
installed into an existing two-gang junction box.
2. Surface or Flush Mounting using the supplied surface mount bracket.
Weather proof IP66
MDC-H6290VTD , MDC-H8290VTD MODEL
IP66
Vandal Proof
SMART
IR

16 MICRODIGITAL
1. Camera
2. Auto IRIS Lens Connection Plug
3. L-WRENCH
4. C - Mount Adaptor
5. Manual
'&9,1
32:(5
,5,6-$&.
9,'(2287
'&
9,'(2
6(7
)*
43
12
w
D
H
Width Height depth
64 58 122
Over view
1 Lens protection cap
Cover the lens when not in use.
2 CS-mount lens adaptor
Attach the CS-mount lens here, and if you want to use C-mount lens, also please
attach C-ring to the CS-mount and then also
3 Back focus clamp screw
Loosen the clamp screw with a L-Wrench before adjusting the Back Focal length.
4 Mount bracket
Use the screw holes provided when fixing the camera onto a mounting bracket.
The mounting bracket can be attached to either the bottom or the top of the camera.
COMPONENTS

MICRODIGITAL 17
Width Height depth
64 58 122
COMPONENTS
Over view
3Back focus clamp screw & Hole
4Mount bracket 1Lens protection cap
2CS-MOUNT Lens adaptor
1 Lens protection cap
Cover the lens when not in use.
2 CS-mount lens adaptor
Attach the CS-mount lens here, and if you want to use C-mount lens, also please
attach C-ring to the CS-mount and then also
3 Back focus clamp screw
Loosen the clamp screw with a L-Wrench before adjusting the Back Focal length.
4 Mount bracket
Use the screw holes provided when fixing the camera onto a mounting bracket.
The mounting bracket can be attached to either the bottom or the top of the camera.
MDC-H4290C / CTD

18 MICRODIGITAL
Rear view
Specifications and Designs are subject to change without prior notice due to improvement
1HD-SDI Output
720p “50 / 60fps”, 1080p “30 / 25fps” resolution output, SMPTE292M
Compatible
2CVBS Output
· D1 Resolution, “4:3” display ratio scaling (source : “16:9” display ratio)
· NTSC/PAL, This port is very helpful for installers to install HD-SDI camera easy.
3OSD Control
Arrow – Move to Up / Down / Left / Right, MENU – Menu Setup / OK Button
4DC IRIS JACK
5 12V / GND : DC12V Power Input
Arrow – Move to Up/Down/Left/Right, MENU – Menu Setup / OK Button
6 Power Lamp
DC 12V
POWER
DC-IRIS
HD-SDI
CVBS
HD cctv Camera
5
6
4
3
1
2
1. Varifocal IR Bullet Camera
2. Cable for Extra Video
3. L-WRENCH
4. Screw for Installation
5. Manual
COMPONENTS

MICRODIGITAL 19
Specifications and Designs are subject to change without prior notice due to improvement
1HD-SDI Output
720p “50 / 60fps”, 1080p “30 / 25fps” resolution output, SMPTE292M
Compatible
2CVBS Output
· D1 Resolution, “4:3” display ratio scaling (source : “16:9” display ratio)
· NTSC/PAL, This port is very helpful for installers to install HD-SDI camera easy.
3OSD Control
Arrow – Move to Up / Down / Left / Right, MENU – Menu Setup / OK Button
4DC IRIS JACK
5 12V / GND : DC12V Power Input
Arrow – Move to Up/Down/Left/Right, MENU – Menu Setup / OK Button
6 Power Lamp
1. Varifocal IR Bullet Camera
2. Cable for Extra Video
3. L-WRENCH
4. Screw for Installation
5. Manual
COMPONENTS

20 MICRODIGITAL
1 Lens
2 IR-LED / Heater (Option)
3 Zoom / Focus Lever
4 OSD Joystick (Option)
5 Cable Management Bracket
6 VBS-Extra for connecting to LCD (Option)
VBS-EXTRA
5
1
2
6
4
3
MDC-H6290VTD-24H & 42 (70Ø) / 32 & 40H (90Ø)
MDC-H6290 24H(U) 42(U) 32(U) 40H(U)
Dimension
Diameter 70ø (70.91ø) 90ø (92.59ø)
Width 81.00 106.00
Length 146.05 175.5
IR LED &
Heater
24pcs IR
LED, 4pcs
Heaters
42pcs
IR-LED
32pcs Giant
IR-LED
16pcs Giant /
24pcs IR-LED,
4pcs Heaters
Power Consumption
Normal 140mA
IR LED ON 390mA 430mA 440mA 490mA
Heater ON 550mA X X 650mA
Dimension
▶Specifications and Designs are subject to change without prior notice due to improvement
COMPONENTS