Microdigital MDC-7220WDN-30 User manual

P/N 3690-0144P
FEATURES
SPECIFICATION
MDC-7220WDN-30
WDR IR INDOOR DOME CAMERA
USER’S MANUAL
CODE DESCRIPTION
PACKING LIST
Manual
Service Monitor Cable
Mounting Screw
Opener Key
UTC Remote
Controller
[Option]
Remote Controller
USER INFORMATION
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.
REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVIC-
ING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
This marking on the product, accessories or literature indicates that the
product and its electronic accessories should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsi-
bly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take these
items for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other com-
mercial wastes for disposal.
CAUTION
IR LED
-30
Built-in IR LED
IR
LED
UTC
MDC-xxx0
- DC 12V
POWER SOURCE
DC 12V
UTC Remote Control
DAY / NIGHT FILTER & MECHANISM
WDN
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
DAY / NIGHT
DC Auto
Iris Lens
FILTER CHANGE
LENS
VARIFOCALVARIFOCAL
• Any changes or modifications in construction of this device which are not expressly ap-
proved by the party responsible for compliance could void the user’s authority to operate
the equipment.
• This installation should be made by a qualified service person and should abide by all
local codes.
ⷀ Warning
PRECAUTIONS
• Do not install the camera in ex-
treme temperature conditions.
Only use the camera in the temperature ranges
of the specification.
Be especially careful to provide ventilation
when operating under high temperatures.
•Do not install or use the camera
in an environment where the
humidity is high.
It can cause the image quality to be poor.
• Do not install the camera under
unstable lighting conditions.
Severe lighting change or flicker can cause the
camera to work improperly.
• Do not touch the front lens of
the camera.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints or
dirts on the lens cover.
• Do not drop the camera and
protect it from physical shocks. It can cause malfunctions to occur.
• Never keep the camera pointed
directly at strong light. It can damage the Image Sensor.
• Do not expose the camera to
radioactivity.
If exposed to radioactivity the Image Sensor
will fail.
• Do not expose the camera to
rain or spill beverage on it.
If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the elec-
tronic components.
• Do not expose the camera to
radioactivity.
If exposed to radioactivity the Image Sensor
will fail.
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates “No Disas-
sembling.”
Caution
1MFBTFEPOPUESPQPSIJUUIFQSPEVDU
1MFBTFEPOPUEJTBTTFNCMFUIFQSPEVDU
Installation Circumstance
1MFBTFJOTUBMMUIFHPPETDPOTJEFSJOHUFNQFSBUVSFBOEIVNJEJUZ
1MFBTFEPOPUJOTUBMMUIFHPPETXIFSFFMFDUSJDJUZnPXT
NOTE
• Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
•
Ensure that the power source complies with normal specifications before supplying it to
the camera.
• Power supply (Adaptor : DC12V).
- To avoid fire or shock hazard, must use a UL listed power supply.
• Monitor Impedance.
- Set the impedance switch to 75 ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred.
In this case, just check the position of the monitor impedance switch.
• 1/3" 960H Double Scan High Sensitivity CCD
• Varifocal 2.8~12.0mm Lens
• ICR (True Day & Night)
• Color 700 TV Lines, BW 800 TV Lines
• Wide Dynamic Range, Adaptive Tone Reproduction (ATR-Ex)
• 2D+3D Noise Reduction, HLC, DIS, Privacy Mask, Intelligent Motion Detection
• Intelligent Object Detection
• 30 units of IR LEDs
• OSD Menu Control over UTC
• 12VDC
Model no. MDC-7220WDN-30
Image Sensor 1/3" 960H Double Scan High Sensitivity CCD
Signal System NTSC PAL
Scanning Frequency(H) 15,734KHz(H) 15,625KHz(H)
Scanning Frequency(V) 59.94Hz(V) 50.00Hz(V)
Total Pixel 1020(H) x 508(V) 1020(H) x 596(V)
Effective Pixels 976(H) x 494(V) 976(H) x 582(V)
Horizontal Resolution Color 700 TV Lines, BW 800 TV Lines
Video Output Level Composite 1.0Vp-p(75Ωload)
S/N Ratio More than 52dB (AGC off)
Lens Mount Varifocal 2.8~12.0mm Auto Iris Lens, ICR (True Day & Night)
Min. Illumination 0 Lux (IR LED ON)
IR LED 30 units of IR LEDs
Shutter Speed 1/60sec.~1/100000sec.(60Hz) 1/50sec.~1/100000sec.(50Hz)
Exposure Auto / Shutter PRI / Manual
Lens DC / Video / Manual
Gain Control On / Off (Max 30dB)
Digital Slow Shutter Man x2~x512 / Off
Brightness 1 ~ 15 Steps
WDR On / Off, Wide Dynamic Range
BLC On / Off
Day & Night Day / Night / Auto / Ext
White Balance ATW / One Push / Indoor / Outdoor / Manual / Auto
Chroma Low / Mid / High
Image HLC / DNR / HR / Mirror / Sharpness / Effect / Freeze / E.Zoom (Max x2~x32)
DNR Off / Manual / Auto
HR 1~7 Steps / Off
Privacy Mask 16 Positions / Off
Motion Detection 3 Positions / Off
Object Detection On / Off
Special Sync / Phase / DIS / Defect Detection / Scene Mode / Comm
DIS On / Off
Scene Mode User / Normal / Traffic / Back Light / Day&Night / Casino
Multi Language English / Chinese / Korean / Japanese
OSD OSD Control over Coaxial Cable by MDR-x490, x690, x900 or UTC Remote
Controller with 3rd Party DVR
Operating Temperature (-)10℃~ (+)50℃
Operating Humidity 95% RH max
Standard CE, FCC
Power Consumption 12VDC ± 10%, 360mA
WDR
Dual Scan

INSTALLATIONCONNECTION
COMPONENTS
DESCRIPTION
Dimension(mm)
1 Lens
2 IR-LED
3 OSD Board
4 Zoom / Focus Lever
5 3 Axis bracket
·
Adjust pan, tilt and twist to give
the correct angle of view.
▶Specifications and Designs are subject to change without prior notice due to improvement
41
2
3
Ceiling
MOUNTING SCREW
BASE HOUSING
DOME COVER
DOME COVER
HOLDER
6
∅101
3-
∅
5
∅
100
H
51.7
D
Remote Controller
Remote Controller Monitor / DVR
DVD
Power Input
BNC Connector
Power Input
BNC Connector
UTC Control by Coaxial cable
When using MD 960H DVR
MD 960H DVR
DVD
When using 3 Party DVR
rd
FRONT VIEW BOTTOM VIEW
1) Connection to Monitor
2) Connection to Power
- Connect the adaptor to the power input connector as shown in the following figure.
The Standard voltage for camera option : DC 12V± 10%,
Power Input
Power Input
BNC Connector
BNC Connector
- As the connecting method varies with the instruments, refer to the manual supplied with
the instrument.
- Only connect the cable when the power is turned off.
For 12V DC Power Type
- Connect the video-out jack to the video-in jack of monitor.
- Connect the power adapter to the power input connector.
- Use 12V DC power source.
- Use the power rated at least 1A (12VDC)
NO Function Terminal
Color Remark
#1 Video Output Yellow 1.0 Vp-p
#2 Power Input Red 12V DC(11V~13V),
Video Output
GND
Power(+)
GND
*Use recommendable
Power Supply
Min. 12W / 1A
OSD STRUCTURE
VBS-EXTRA
Push(set)
3
3-2 OSD SW
3-1 Service Monitor Terminal
3-23-1
• Open the dome with the opener key supplied.
• There are 3 mounting holes on the base housing
so that users can install the unit in any place such
as on the ceiling, on the wall, on the
fence and etc.
• Adjust picture direction pan & tilting.
• Close the dome cover on the base housing.
Model no. MDC-7220WDN-30
Dimension
Diameter 130mm
Height 106.6mm
IR LED 30 units of IR LEDs
Power Consumption
Normal 110mA
IR LED on 360mA
SET UP ME N U SUB ME N U
MANUAL
HLC
DNR
NIGHT
FIX LEVEL : 255 (0~255)
LEVEL MIN : 6 (0~255)
LEVEL MA X : 255 (0~255)
ON COLO R GAIN : MID (LO W, , HIG H)
PATTERN : SET1(SET1,SET2, SET3)
POSH : 480 (0~959)
POSV: 290 (0~578) - PAL
LEVEL : MID (LOW, MID, HIG H)
ON
ON
ANTI CR
OFF
ON
DEFOG
OFF
LEVEL : MID (LOW, MID, HIG H)
FLK LE SS
OFF
MODE : SHUTTERFIX (SHUTTER FIX, GAIN CNTL)
IR SHADE COMP
OFF
ON
LENS SHD COMP
OFF
ON
PAT TERN : SET 1(SET 1, SET 2, SET3 )
POSH : 480 ( 0~959 )
POSV : 2 90 (0 ~578) - PAL
LEVEL : 06 (00~12)
IR LED
OFF
DAY/NIGHT
COLO R NIGHT
OFF
IR OPTIMIZER
OFF
ON (MODE)
MOD E : AUT O (AU TO, CEN TER)
IR A REA (Onl y Cent er Mo de)
TOP : 4 (0~6)
BOTTOM : 6 (0~6)
LEFT : 3 (0~6)
RIGH T : 5 (0 ~6)
WE IGHT : 04 ( 00~15 )
LEVEL : 3 (0~6)
DAY/NIGHT
DAY
BURST : OFF (O FF, ON )
AUTO
BURST : OFF (O FF, ON )
CNT L SIGN AL : INT (E XT1, EXT2)
DELAYCNT : 3 (0~255)
DAY->NIGHT : 90 (0~255)
NIGHT->DAY : 115 (0~255)
WDR/ATR-EX
OFF
ATR-EX
CON TRAST : MI D (LOW , MID, HIG H)
CLEA R FACE : MI D (LOW , MID, HI GH)
WDR
CON TRAST : MI D (LOW , MID, HIG H)
CLEA R FACE : MI D (LOW , MID, HI GH)
LEVEL : 41 (0~63)
PUSH LO CK
HLC/BLC
OFF
CLIP LEVEL 0 (0~255 )
BLC
PUSH
USER1
B-GAIN : 234 (1~255)
R-GAIN : 244 (1~255)
USER2
B-GAIN : 235 (1~255)
R-GAIN : 244 (1~255)
AUTO
AELEVEL : 100 (1~250)
AGC MAX : 18dB (6dB~44.8dB)
SENSE UP : AUTO (OFF,AUTO)
WHITE BAL
ATW
SPEED : 245 (1~255)
DELAYCNT : 15 (1~255)
ATW FRAME : 128 (1~255)
EN VIRON MEN T : AU TO (A UTO , IND OOR, SU NNY , SHADE )
ADVANCE MENU
SCEN E SELECT
FULL A UTO
INDOO R
OUTDOOR
BACKLIGHT
ITS
CUSTOM
SHUTTER/AGC
FIX
SHUTTER : 1/50 (256FLD~1/10000)
AGC MA X : 6dB (6dB~44.8dB)
MANUAL
SHUTTER : 1/50 (256FLD~1/10000)
AGC MA X : 6dB (6dB~44.8dB)
SET UP ME N U
BRIHTNESS: 128 (0 ~ 255)
CON TRAST : 32 ( 0 ~ 63)
SHA RPNESS : 8 (0 ~ 1 5)
HUE : 64 (0 ~ 127)
COL OR GA IN : 12 8 (0 ~ 25 5)
MAG : 0 (0 ~ 255)
PAN : 5 12 (0 ~ 10 23)
TILT : 256 (0 ~ 511)
OFF
ON
ARE A SEL : 1 /15 (1 /15, 2 /15,3 /15 .....15/1 5)
DI SPLAY : O FF (OFF, O N)
POSIT ION
COLO R : RED (RED , GREEN , BLUE, YE LLOW, CYA N, MAG ENT A, WHI TE, BLA CK)
TRA NSP : 1.0 0 (0.00 , 0.50, 0 .75, 1. 00)
MOSIC : —- (—-, OFF)
OFF
DE TECT SE NSE : 1 11 (0 ~ 1 27)
INTERVAL : 0 (0 ~ 127)
BLOCKD ISP: OFF (OFF, ON)
MASK A REA : 1 ~96 Bl ock
AREASEL : 1/4 (1/4, 2/4,3/4, 4/4)
ARE A MOD E : OFF (O N, OFF)
TOP : 3 (0~15)
BOTTOM : 4 (0~15)
LEFT : 4 (0~23)
RIGH T : 8 (0~2 3)
INT
MAN UAL
TYPE : DC (DC,VIDEO)
MOD E : A UTO ( AUT O, OPE N, CLO SE)
ADJUST
SPEED : 31 (0~255)
FLIP : O FF (OFF, V, H, VH)
LCD/CRT : LCD (LCD,CRT)
PROTOCOL : PELCO-D
ADDRESS: 1 (1~255)
BAUDRATE : 2400 (2400, 4800, 9600, 19200, 38400, 57600, 115200)
DATA BIT : 8BIT
PARIT Y : OFF (OFF, O DD, E VEN)
STOPBIT : 1BIT
OFF
A~Z…..POS
LANG UAGE English, Japanese, German, French, Russian,Por tuguese,Spanish (Chinese )
VERSION 5.0.0
REG ISTRA TION
REG. PO INT : OFF (O FF, WHITE , BLACK)
CURSOR COL OR : WHIT E (WH ITE, BLA CK, RED, G REEN, BLU E)
BLIN K : OFF (OFF, ON)
REG . NUMBE R : 1/6 4 (1/6 4, 2/6 4 …... 64 /64 )
LEVEL1 : 8 (0~255)
LEVEL2 : 2 55 (0~255)
RUN
BACK
CAMERA RE SET
SAVE
NOT SAVE
CAN CEL
BACK
MAN UAL
AUTO
AUTO
SUB ME NU
ADVANCE MENU
ON
SYNC M ODE
LENS
MOTION AREA
AUTO
EXIT
W.PIXMASK
MAINTENANCE
ON
COMUN ICA TIO N
CAMERA I D
SYS SET TIN G
MOTI ON DE T
PRIVACY A SK
EZOOM
DIS
PICT AD JUST