Microlab M-600 User manual

Prior to first use, please read the manual carefully
Microlab Technology Co.,Ltd
Made in China
All symbols and logo belong to the respective brand holder or registered holder. All specifications and information are subject to changes without
further notice. Slight variations and differences might appear between the printed photos and actual product due to product enhancement.
No:80-M600(10)-97-0001-01
M-600
User manual
High Performance Acoustic
No:80-M600(10)-97-0001-01 10-03-11

1
Important Safety Instructions Frequently Asked Questions (FAQ)
WARNINGS:
1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and use instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to
the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company.
7. Grounding or polarisation - the is not required to be grounded. Ensure the plug is fully inserted into the wall outlet
or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power
cord fitted with a polarized alternating line plug (a plug having one blade wide than the other). This plug will fit onto the
power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarised plug. When using an extension power-supply cord or a power-supply cord other than that
supplied with the appliance ,it should be fitted with the appropriate moulded-on plugs and carry safety approval
appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on, kinked or
pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point
where they exit from the appliance.
9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk of fire or
electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface.
Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products) including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on
the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or
excessive moisture such as in a sauna or bathroom. Do not use this product near waterfor example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool and the like.
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch
dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product. Do not place any object containing liquid on top of the product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be cleaned by
dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the
cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufactures, as they may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.
17. Moving the - A product and cart combination should be moved with care. Quick stops, excessive force and
uneven surfaces may cause the product and cart combination to overturn.
18. Unuse periods - The power cord of the appliance should be unplugged from the outlet during lightning storms or when the
apparatus is left unused for a long period of time.
product
product
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No
user-serviceable parts inside. Refer servicing to qualified personnel only.
6
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
Explanation of Graphical Symbols:
Solution
Check if the system is powered on
Check the power plug is well connected
Check if the audio source is working well
Check if the audio and speaker cables are well
connected
Check if the volume is at right level
One or more satellite no sound Check if the satellite cable is well connected
No Bass Check if the Bass Volume is at right level
If the problem still exists, please contact the distributor or ask for professional service
Power LED won't light up
No Sound
Sound is distorted
Check if the volume is at lower level
- The end -
All rights reserved
© 2010 Microlab Technology Co., Ltd
No:80-M600(10)-97-0001-01 10-03-11

5
Introduction
Technical Information
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use. When plugged in
to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct
fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the
speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the power cord from
the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at
all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
Specifications
2
Package contents
M-600 subwoofer 1pc
M-600 satellites 2pcs
3.5mm stereo - 2RCA cable pc
User manual
1
1pc
Amplifier
Output power: 40 Watt RMS
Power distribution: 12 Watt x 2 + 16 Watt
Harmonic distortion: < 0.3% 1W 1kHz
Signal/Noise ratio: > 75dB
Separation: > 45dB
Nominal impedance: 4 ohm
Tweeter driver type: 3" x 2
Tweeter rated power: 5 Watt x 2, 6 ohm
Bass driver type: 5"
Bass rated power: 15 Watt, 4 ohm
Output: 2RCA
Input:
Power supply: AC 220V - 240V, 50Hz 140mA or
120V 60Hz, 280mA
Subwoofer dimension: 245 x 175 x 275mm
Satellites dimensions: 95 x 175 x 105mm
Product net weight: 5.4kg
Speakers
Interfaces
Power
Dimensions
2RCA
The ultimate multimedia speakers for all type of media players, computer, Mp3/Mp4 players and
CD/DVD players. An all time favourites among many, this system sounds good, looks good and
feels good too. Designed specifically and optimised for digital audio playbacks, the M series
product are subwoofer systems with deep bass and full range dynamics using Microlab's
eAirbass technology. Quality stylish 2.1 subwoofer system with powerful bass effect and
stereophonic.
Features
·
·
·
·
·
2.1subwoofer system for multimedia and digital playbacks
Beautiful and elegant finish, ideal for different room types
Made from special aluminium speaker drivers for excellent audio characteristics and spectrum
Full sound range and smooth operation
Magnetically shielded for interference free operation
Not to scale
Left
Sat Right
Sat
Amplifier
Media player
Viewing screen
Subwoofer
2.1 subwoofer arrangement
Ideal listening position and placement
No:80-M600(10)-97-0001-01 10-03-11

Product connection
Illustrations
3 4
Front View
Rear View
1. Connect the satellite speaker cables into the corresponding L & R output on the rear of the
subwoofer, then put the left channel satellite on the left and the right satellite on the right.
2. Connecting the speakers to the audio source.
Please use the audio cable (3.5mm-2RCA). Connect RCA plugs of the audio cable into the L & R
jacks at the back of the subwoofer, the other end into the output jack on the stereo audio source
such as Mp3, Mp4, PC, or CD/DVD player.
3. Check the connection and make sure every cable is correctly connected, then connect power
plug to the right AC outlet.
1. Ensure the volume is set to minimum.
2. Turn on the main AC power.
3. Please switch on the power of the system in front of the subwoofer.
4. Turn on the playback device such as Mp3, Mp4, CD/DVD, or media player.
5. Adjust the main volume in front of the subwoofer to your preferred level.
6. Next adjust the bass volume at the rear of the subwoofer to your preferred effect level.
Connection:
Operation
RCA
*Note the correct orientation of the satellites as illustrated.
AC power supply:
220V-240V~ 50Hz
Right satellite Left satellite
SUBWOOFER
PC
Mp3 \ Mp4
Media player
CD\ VCD \ DVD
Master
volume
High temperature during operation.
Avoid touching back panel.
High temperature during operation.
Avoid touching back panel.
VOLUME
06- M600(10)-01-0001-02 2010-01-26
POWER
06- 10 01 26M600(10)-01-0001-01 20 - - 06- M600(10)-04-0001-01 2010-01-26
Tweeter
Woofer
On/Off
button
Audio
Output: 2RCA
AC power
cord
Bass volume
Audio
Input: 2RCA
No:80-M600(10)-97-0001-01 10-03-11