Micron S600DC Series User manual

S600DC Series 2.5-Inch SAS NAND Flash
SSD
MTFDJAK400MBS, MTFDJAK400MBT, MTFDJAK800MBS,
MTFDJAK800MBT, MTFDJAL1T6MBS, MTFDJAL1T6MBT,
MTFDJAL3T2MBS, MTFDJAL3T2MBT, MTFDJAK480MBT,
MTFDJAK960MBT, MTFDJAL1T9MBT, MTFDJAL3T8MBT,
MTFDJAL1T9MBU, MTFDJAL3T8MBU, MTFDJAK200MBW,
MTFDJAK400MBW
Features
• Four endurance levels
– S655DC = 25 DWPD; S650DC = 10 DWPD
– S630DC = 2–3 DWPD; S610DC = <1 DWPD
• Micron®16nm MLC NAND Flash
• RoHS-compliant package
• SAS
– Interface = 12 Gb/s
– Speed = 3 Gb/s, 6 Gb/s, 12 Gb/s, and auto-speed
negotiation
– SAS-3 support
• SAM-5 compliant
• Enterprise sector size support = 512, 520, 524, 528,
4096, 4160, 4192, and 4224-byte
• Hot-plug capable
• 128-entry command queue depth
• Digitally signed firmware for SED and non-SED
• FIPS140-2 level 2 certification option available on
each S650DC 2.5-inch device:
400GB, 800GB, 1600GB, and 3200GB
• Secure erase via format unit
• Reliability
– MTTF: 2.5 million device hours1
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): 1 × 1017 bits
transferred
• Capacity 2(unformatted): 200GB, 400GB, 480GB,
800GB, 960GB, 1600GB, 1920GB, 3200GB, 3840GB
• Endurance: TBW over warranty period4
– S655DC (25 DWPD):
200GB-8PB, 400GB-17PB
– S650DC (10 DWPD):
400GB-7PB, 800GB-14PB
1600GB-29PB, 3200GB-58PB
• Endurance: TBW over warranty period4
– S630DC (2–3 DWPD):
400GB-2.1PB, 480GB-2.6PB,
800GB-2.9PB, 960GB-5.2PB,
1600GB-5.8PB, 1920GB-10PB,
3200GB-12PB, 3840-21PB
– S610DC (1 DWPD):
1920GB-2.8PB, 3840GB-5.6PB
• Electrical
– Supply voltage: 5 VDC (±5%) and 12 VDC (±5%)
• Mechanical
– 2.5-inch drive: 100.5mm × 69.85mm × 7mm, and
100.5mm × 69.85mm × 15mm
• Field-upgradeable firmware
• Power consumption: 9W (TYP) and 12W (MAX)
– Configurable through information exceptions
mode page
• Operating temperature
– 0°C to +50°C (MAX)3
Notes: 1. Product achieves a mean time to failure
(MTTF) based on population statistics that
are not relevant to individual units.
2. 1GB = 1 billion bytes; formatted capacity is
less.
3. Based on ambient air temperature.
4. Total bytes written (TBW): Warranty de-
fined in the product manual is five years or
device expiration as indicated by the device
life indicator, whichever comes first.
Warranty: Contact your Micron sales representative
for further information regarding the product, includ-
ing product warranties.
S600DC Series 2.5-Inch SAS NAND Flash SSD
Features
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 1Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.

Table 1: Performance
Notes apply to entire table
Device
and
Capacity
Sequential
128KB Transfer
Random
4KB Transfer
Random
4KB Transfer (70/30)
Average
Latency (µs)
Read
(MB/s)
Write
(MB/s)
Read
(KIOPS)
Write
(KIOPS)
Mixed Read/Write
(KIOPS)
S655DC
200GB 1550 600 200 120 85 115
400GB 1700 850 200 120 115 115
S650DC
400GB 1550 625 180 67 80 115
800GB 1850 850 200 80 105 115
1600GB 1900 850 200 80 120 115
3200GB 1900 800 200 80 120 115
S630DC
400GB 1400 490 180 20 45 115
480GB 1550 615 180 30 45 115
800GB 1400 710 180 20 45 115
960GB 1700 850 180 30 65 115
1600GB 1600 850 180 20 45 115
1920GB 1850 850 180 30 65 115
3200GB 1600 850 180 20 45 115
3840GB 1850 770 180 30 65 115
S610DC
1920GB 1700 850 190 12 45 115
3840GB 1600 770 190 15 45 115
Notes: 1. Typical I/O performance numbers: measured using an iometer in a steady state region with a queue depth of
32 for sequential and random transfers and write cache enabled; a queue depth of 1 for READ/WRITE laten-
cy values.
2. Consistent host system interface, configurations, and variables: maintained with variation only in the drive
being tested.
3. Response time measurement conditions: recorded with nominal power at 25 °C ambient temperature.
4. Page-to-page response times: derived from all possible page-to-page accesses on a sequentially precondi-
tioned drive.
5. Average response time: derived from at least 5000 access measurements between programmable pages on a
randomly preconditioned drive to ensure a true statistical random average.
S600DC Series 2.5-Inch SAS NAND Flash SSD
Features
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 2Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Part Numbering Information
Micron’s 600 series SAS SSD is available in different configurations and densities. Visit www.micron.com for a list
of valid part numbers.
Figure 1: Part Number Chart
MT FD J AK 400 M BS - 1 AN 1 ES
Micron Technology
Product Family
FD = Flash drive
Drive Interface
J = SAS 12.0 Gb/s
Drive Form Factor
AK = 2.5-inch (7mm)
AL = 2.5-inch (15mm)
Drive Density
200 = 200GB
400 = 400GB
480 = 480GB
800 = 800GB
960 = 960GB
1T6 = 1600GB (1.6TB)
1T9 = 1920GB (1.92TB)
3T2 = 3200GB (3.2TB)
3T8 = 3840GB (3.84TB)
NAND Flash Type
M = MLC
Product Family
BS = S650DC
BT = S630DC
BU = S610DC
BW = S655DC
Production Status
Blank = Production
ES = Engineering sample
Customer Designator
YY = Standard
Hardware Feature
AB = Standard
FC = FIPS140-2 Level 2
Extended Firmware Features
Z = None
6 = SED-TCG eSSC
Sector Size
1 = 512 byte
2 = 520 byte
3 = 528 byte
NAND Flash Component
AN = L95B, 128Gb, MLC, 3.3V
BOM Revision
1 = 1st generation
2 = 2nd generation
Z AB YY
S600DC Series 2.5-Inch SAS NAND Flash SSD
Features
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 3Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

General Description
Micron’s solid state drive (SSD) uses a single-chip controller with a dual-port SAS inter-
face on the system side and 10 channels of Micron NAND Flash internally. Packaged in
an HDD replacement enclosure, the SSD integrates easily into existing storage infra-
structures.
The SSD is designed to support and manage the needs of highly available, high-per-
formance platforms that use significant read/write mixed workloads. Optimized to sup-
port enterprise needs previously supported only by single-level cell (SLC) solutions, this
SSD provides endurance and data integrity required by growing environments.
Functional Block Diagrams
Figure 2: Functional Block Diagram – 7mm Variant (Controller Attached to NAND Directly)
Micron 16nm
eMLC NAND
Controller SoC
Phy
Mgmt
MO
offload
MO
offload
MO
offload
Interface
R5
processor
F.T.L.
R5
processor
x9
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Figure 3: Functional Block Diagram – 15mm Variant (Controller Attached to NAND by Bridge)
Controller SoC
Phy
Mgmt
MO
offload
MO
offload
MO
offload
Interface
R5
processor
F.T.L.
R5
processor
x9
NAND bridge controller
PSM
Data path
Micron 16nm
eMLC NAND
Micron 16nm
eMLC NAND
Channel 1
Channel 2
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
Flash ctlr PSM
ONFI target
S600DC Series 2.5-Inch SAS NAND Flash SSD
General Description
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 4Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Logical Block Address Configuration
Each device is set to report its logical block address (LBA) settings, which ensure suffi-
cient storage per device capacity. The tables below show LBA settings according to de-
vice size.
Standard OEM models are formatted to 512 bytes per block. The block size is selectable
at format time, and users with the necessary equipment can modify the data block size
to capacities different than those listed below before issuing a format command. To
provide a stable target capacity environment while also providing users with flexibility,
Micron recommends product planning.
Micron ensures that current and future product generations will meet capacity points at
certain block sizes. Planning with this in mind ensures a stable operating point with
backward and forward compatibility across product generations. The current operating
points for each device are shown below. The capacity stated is identical when the drive
is formatted with or without PI enabled.
Programmable Drive Capacity
Using the MODE SELECT command, users can change the drive capacity to less than its
maximum value. A value of zero in the Number of Blocks field means that the MODE
SELECT command will leave the drive capacity unchanged. A value greater than zero
and less than the maximum number of LBAs in the Number of Blocks field means that
the MODE SELECT command will change the drive capacity to the value in the Number
of Blocks field. A value greater than the maximum number of LBAs means that the
MODE SELECT command will round down to the maximum capacity.
Table 2: Standard LBA Settings – 512-Byte Sector Size
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
S655DC
200GB 390,721,968 1749F1B0 390,721,967 1749F1AF 200,049,647,616
400GB 781,422,768 2E9390B0 781,422,767 2E9390AF 400,088,457,216
S650DC
400GB 781,422,768 2E9390B0 781,422,767 2E9390AF 400,088,457,216
800GB 1,562,824,368 5D26CEB0 1,562,824,367 5D26CEAF 800,166,076,416
1600GB 3,125,627,568 BA4D4AB0 3,125,627,567 BA4D4AAF 1,600,321,314,816
3200GB 6,251,233,968 1749A42B0 6,251,233,967 1749A42AF 3,200,631,791,616
S630DC
400GB 781,422,768 2E9390B0 781,422,767 2E9390AF 400,088,457,216
480GB 937,703,088 37E436B0 937,703,087 37E436AF 480,103,981,056
800GB 1,562,824,368 5D26CEB0 1,562,824,367 5D26CEAF 800,166,076,416
960GB 1,875,385,008 6FC81AB0 1,875,385,007 6FC81AAF 960,197,124,096
1600GB 3,125,627,568 BA4D4AB0 3,125,627,567 BA4D4AAF 1,600,321,314,816
1920GB 3,750,748,848 DF8FE2B0 3,750,748,847 DF8FE2AF 1,920,383,410,176
3200GB 6,251,233,968 1749A42B0 6,251,233,967 1749A42AF 3,200,631,791,616
S600DC Series 2.5-Inch SAS NAND Flash SSD
Logical Block Address Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 5Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 2: Standard LBA Settings – 512-Byte Sector Size (Continued)
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
3840GB 7,501,476,528 1BF1F72B0 7,501,476,527 1BF1F72AF 3,840,755,982,336
S610DC
1920GB 3,750,748,848 DF8FE2B0 3,750,748,847 DF8FE2AF 1,920,383,410,176
3840GB 7,501,476,528 1BF1F72B0 7,501,476,527 1BF1F72AF 3,840,755,982,336
Table 3: Standard LBA Settings – 520-Byte Sector Size
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
S655DC
200GB 382,435,904 16CB8240 382,435,903 16CB823F 198,866,670,080
400GB 764,871,800 2D970478 764,871,799 2D970477 397,733,336,000
S650DC
400GB 764,871,800 2D970478 764,871,799 2D970477 397,733,336,000
800GB 1,529,743,600 5B2E08F0 1,529,743,599 5B2E08EF 795,466,672,000
1600GB 3,059,487,192 B65C11D8 3,059,487,191 B65C11D7 1,590,933,339,840
3200GB 6,118,974,384 16CB823B0 6,118,974,383 16CB823AF 3,181,866,679,680
S630DC
400GB 764,871,800 2D970478 764,871,799 2D970477 397,733,336,000
480GB 917,846,160 36B53890 917,846,159 36B5388F 477,280,003,200
800GB 1,529,743,600 5B2E08F0 1,529,743,599 5B2E08EF 795,466,672,000
960GB 1,835,692,320 6D6A7120 1,835,692,319 6D6A711F 954,560,006,400
1600GB 3,059,487,192 B65C11D8 3,059,487,191 B65C11D7 1,590,933,339,840
1920GB 3,671,384,640 DAD4E240 3,671,384,639 DAD4E23F 1,909,120,012,800
3200GB 6,118,974,384 16CB823B0 6,118,974,383 16CB823AF 3,181,866,679,680
3840GB 7,342,769,280 1B5A9C480 7,342,769,279 1B5A9C47F 3,818,240,025,600
S610DC
1920GB 3,671,384,640 DAD4E240 3,671,384,639 DAD4E23F 1,909,120,012,800
3840GB 7,342,769,280 1B5A9C480 7,342,769,279 1B5A9C47F 3,818,240,025,600
S600DC Series 2.5-Inch SAS NAND Flash SSD
Logical Block Address Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 6Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 4: Standard LBA Settings – 524-Byte Sector Size
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
S655DC
200GB 377,338,536 167DBAA8 377,338,535 167DBAA7 197,725,392,864
400GB 754,677,072 2CFB7550 754,677,071 2CFB754F 395,450,785,728
S650DC
400GB 754,677,072 2CFB7550 754,677,071 2CFB754F 395,450,785,728
800GB 1,509,354,136 59F6EA98 1,509,354,135 59F6EA97 790,901,567,264
1600GB 3,018,708,272 B3EDD530 3,018,708,271 B3EDD52F 1,581,803,134,528
3200GB 6,037,416,536 167DBAA58 6,037,416,535 167DBAA57 3,163,606,264,864
S630DC
400GB 754,677,072 2CFB7550 754,677,071 2CFB754F 395,450,785,728
480GB 905,612,480 35FA8CC0 905,612,479 35FA8CBF 474,540,939,520
800GB 1,509,354,136 59F6EA98 1,509,354,135 59F6EA97 790,901,567,264
960GB 1,811,224,960 6BF51980 1,811,224,959 6BF5197F 949,081,879,040
1600GB 3,018,708,272 B3EDD530 3,018,708,271 B3EDD52F 1,581,803,134,528
1920GB 3,622,449,920 D7EA3300 3,622,449,919 D7EA32FF 1,898,163,758,080
3200GB 6,037,416,536 167DBAA58 6,037,416,535 167DBAA57 3,163,606,264,864
3840GB 7,244,899,840 1AFD46600 7,244,899,839 1AFD465FF 3,796,327,516,160
S610DC
1920GB 3,622,449,920 D7EA3300 3,622,449,919 D7EA32FF 1,898,163,758,080
3840GB 7,244,899,840 1AFD46600 7,244,899,839 1AFD465FF 3,796,327,516,160
Table 5: Standard LBA Settings – 528-Byte Sector Size
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
S655DC
200GB 371,916,520 162AFEE8 371,916,519 162AFEE7 196,371,922,560
400GB 743,833,040 2C55FDD0 743,833,039 2C55FDCF 392,743,845,120
S650DC
400GB 743,833,040 2C55FDD0 743,833,039 2C55FDCF 392,743,845,120
800GB 1,487,666,080 58ABFBA0 1,487,666,079 58ABFB9F 785,487,690,240
1600GB 3,719,165,192 DDADF508 3,719,165,191 DDADF507 1,963,719,221,376
3200GB 5,950,664,304 162AFEE70 5,950,664,303 162AFEE6F 3,141,950,752,512
S630DC
400GB 743,833,040 2C55FDD0 743,833,039 2C55FDCF 392,743,845,120
S600DC Series 2.5-Inch SAS NAND Flash SSD
Logical Block Address Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 7Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 5: Standard LBA Settings – 528-Byte Sector Size (Continued)
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
480GB 892,599,648 3533FD60 892,599,647 3533FD5F 471,292,614,144
800GB 1,487,666,080 58ABFBA0 1,487,666,079 58ABFB9F 785,487,690,240
960GB 1,785,199,296 6A67FAC0 1,785,199,295 6A67FABF 942,585,228,288
1600GB 3,719,165,192 DDADF508 3,719,165,191 DDADF507 1,963,719,221,376
1920GB 3,570,398,592 D4CFF580 3,570,398,591 D4CFF57F 1,885,170,456,576
3200GB 5,950,664,304 162AFEE70 5,950,664,303 162AFEE6F 3,141,950,752,512
3840GB 7,140,797,184 1A99FEB00 7,140,797,183 1A99FEAFF 3,770,340,913,152
S610DC
1920GB 3,570,398,592 D4CFF580 3,570,398,591 D4CFF57F 1,885,170,456,576
3840GB 7,140,797,184 1A99FEB00 7,140,797,183 1A99FEAFF 3,770,340,913,152
Table 6: Standard LBA Settings – 4096-Byte Sector Size
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
S655DC
200GB 48,840,246 2E93E36 48,840,245 2E93E35 200,049,647,616
400GB 97,677,846 5D27216 97,677,845 5D27215 400,088,457,216
S650DC
400GB 97,677,846 5D27216 97,677,845 5D27215 400,088,457,216
800GB 195,353,046 BA4D9D6 195,353,045 BA4D9D5 800,166,076,416
1600GB 390,703,446 1749A956 390,703,445 1749A955 1,600,321,314,816
3200GB 781,404,246 2E934856 781,404,245 2E934855 3,200,631,791,616
S630DC
400GB 97,677,846 5D27216 97,677,845 5D27215 400,088,457,216
480GB 117,212,886 6FC86D6 117,212,885 6FC86D5 480,103,981,056
800GB 195,353,046 BA4D9D6 195,353,045 BA4D9D5 800,166,076,416
960GB 234,423,126 DF90356 234,423,125 DF90355 960,197,124,096
1600GB 390,703,446 1749A956 390,703,445 1749A955 1,600,321,314,816
1920GB 468,843,606 1BF1FC56 468,843,605 1BF1FC55 1,920,383,410,176
3200GB 781,404,246 2E934856 781,404,245 2E934855 3,200,631,791,616
3840GB 937,684,566 37E3EE56 937,684,565 37E3EE55 3,840,755,982,336
S610DC
1920GB 468,843,606 1BF1FC56 468,843,605 1BF1FC55 1,920,383,410,176
3840GB 937,684,566 37E3EE56 937,684,565 37E3EE55 3,840,755,982,336
S600DC Series 2.5-Inch SAS NAND Flash SSD
Logical Block Address Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 8Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 7: Standard LBA Settings – 4160-Byte Sector Size
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
S655DC
200GB 47,884,616 2DAA948 47,884,615 2DAA947 199,200,002,560
400GB 95,769,232 5B55290 95,769,231 5B5528F 398,400,005,120
S650DC
400GB 95,769,232 5B55290 95,769,231 5B5528F 398,400,005,120
800GB 191,538,464 B6AA520 191,538,463 B6AA51F 796,800,010,240
1600GB 383,076,928 16D54A40 383,076,927 16D54A3F 1,593,600,020,480
3200GB 766,153,848 2DAA9478 766,153,847 2DAA9477 3,187,200,007,680
S630DC
400GB 95,769,232 5B55290 95,769,231 5B5528F 398,400,005,120
480GB 114,923,080 6D99648 114,923,079 6D99647 478,080,012,800
800GB 191,538,464 B6AA520 191,538,463 B6AA51F 796,800,010,240
960GB 229,846,160 DB32C90 229,846,159 DB32C8F 956,160,025,600
1600GB 383,076,928 16D54A40 383,076,927 16D54A3F 1,593,600,020,480
1920GB 459,692,312 1B665918 459,692,311 1B665917 1,912,320,017,920
3200GB 766,153,848 2DAA9478 766,153,847 2DAA9477 3,187,200,007,680
3840GB 919,384,616 36CCB228 919,384,615 36CCB227 3,824,640,002,560
S610DC
1920GB 459,692,312 1B665918 459,692,311 1B665917 1,912,320,017,920
3840GB 919,384,616 36CCB228 919,384,615 36CCB227 3,824,640,002,560
Table 8: Standard LBA Settings – 4192-Byte Sector Size
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
S655DC
200GB 47,280,536 2D17198 47,280,535 2D17197 198,200,006,912
400GB 94,561,072 5A2E330 94,561,071 5A2E32F 396,400,013,824
S650DC
400GB 94,561,072 5A2E330 94,561,071 5A2E32F 396,400,013,824
800GB 189,122,144 B45C660 189,122,143 B45C65F 792,800,027,648
1600GB 378,244,280 168B8CB8 378,244,279 168B8CB7 1,585,600,021,760
3200GB 756,488,552 2D171968 756,488,551 2D171967 3,171,200,009,984
S630DC
400GB 94,561,072 5A2E330 94,561,071 5A2E32F 396,400,013,824
480GB 113,473,288 6C37708 113,473,287 6C37707 475,680,023,296
S600DC Series 2.5-Inch SAS NAND Flash SSD
Logical Block Address Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 9Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 8: Standard LBA Settings – 4192-Byte Sector Size (Continued)
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
800GB 189,122,144 B45C660 189,122,143 B45C65F 792,800,027,648
960GB 226,946,568 D86EE08 226,946,567 D86EE07 951,360,013,056
1600GB 378,244,280 168B8CB8 378,244,279 168B8CB7 1,585,600,021,760
1920GB 453,893,136 1B0DDC10 453,893,135 1B0DDC0F 1,902,720,026,112
3200GB 756,488,552 2D171968 756,488,551 2D171967 3,171,200,009,984
3840GB 907,786,264 361BB818 907,786,263 361BB817 3,805,440,018,688
S610DC
1920GB 453,893,136 1B0DDC10 453,893,135 1B0DDC0F 1,902,720,026,112
3840GB 907,786,264 361BB818 907,786,263 361BB817 3,805,440,018,688
Table 9: Standard LBA Settings – 4224-Byte Sector Size
Device and
Capacity
Total LBA Max LBA User Available
Bytes
(Unformatted)Decimal Hexidecimal Decimal Hexidecimal
S655DC
200GB 46,922,352 2CBFA70 46,922,351 2CBFA6F 198,200,014,848
400GB 93,844,704 597F4E0 93,844,703 597F4DF 396,400,029,696
S650DC
400GB 93,844,704 597F4E0 93,844,703 597F4DF 396,400,029,696
800GB 187,689,400 B2FE9B8 187,689,399 B2FE9B7 792,800,025,600
1600GB 375,378,792 165FD368 375,378,791 165FD367 1,585,600,017,408
3200GB 750,757,576 2CBFA6C8 750,757,575 2CBFA6C7 3,171,200,001,024
S630DC
400GB 93,844,704 597F4E0 93,844,703 597F4DF 396,400,029,696
480GB 112,613,640 6B65908 112,613,639 6B65907 475,680,015,360
800GB 187,689,400 B2FE9B8 187,689,399 B2FE9B7 792,800,025,600
960GB 225,227,280 D6CB210 225,227,279 D6CB20F 951,360,030,720
1600GB 750,757,576 2CBFA6C8 750,757,575 2CBFA6C7 3,171,200,001,024
1920GB 450,454,552 1AD96418 450,454,551 1AD96417 1,902,720,027,648
3200GB 757,725,329 2D29F891 757,725,328 2D29F890 3,200,631,791,616
3840GB 900,909,096 35B2C828 900,909,095 35B2C827 3,805,440,021,504
S610DC
1920GB 450,454,552 1AD96418 450,454,551 1AD96417 1,902,720,027,648
3840GB 900,909,096 35B2C828 900,909,095 35B2C827 3,805,440,021,504
S600DC Series 2.5-Inch SAS NAND Flash SSD
Logical Block Address Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 10 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Physical Configuration
Dimensions and Weight
Form
factor Capacity (GB)
Height
(mm)
Width
(mm)
Length
(mm)
Weight
(grams)
2.5-inch 200/400/480/800/960 7.00 +0.20/–0.50 69.85 ±0.25 100.24 ±0.21 TBD
1600/1920/3200/3840 15.00 +0.00/–0.50
Dual Port Support
Micron's 600 Series SAS SSD drives have two independent ports, which can be connec-
ted in the same or different SCSI domains. Each drive port has a unique SAS address.
The two ports are capable of independent port clocking. For example, both ports can
run at 12 Gb/s, or the first port can run at 12 Gb/s while the second runs at 6 Gb/s. Sup-
ported link rates are 3.0, 6.0, or 12.0 Gb/s.
Subject to buffer availability, SSD drives support the following:
• Concurrent port transfers: Supports receiving COMMAND and TASK management
transfers on both ports simultaneously
• Full duplex transfers: Supports sending XFER_RDY, DATA, and RESPONSE transfers
while receiving frames on both ports
Interface Connectors
The SAS signal segment interface cable has four transmission conductors and three
ground conductors for each channel. As shown in the figure below, the cable includes
two 7-pin signal segments (primary and secondary) and a 15-pin power segment ar-
ranged in a single row with a 1.27mm (0.050 inch) pitch.
SAS drives use the device connector for the following:
• DC power
• SAS interface (dual port)
• Activity LED (DAS)
Figure 4: SSD Interface Connections
Power segment
Primary signal segment
Secondary signal segment
P1
S8
S1
S600DC Series 2.5-Inch SAS NAND Flash SSD
Physical Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 11 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Pin Assignments
Table 10: Primary SAS Signal Segment Pin Assignments
Signal Name Type Description
S1 GND Second mate to ground
S2 RX0+ Positive (RX0 from target); short pin to support hot plugging
S3 RX0– Negative (RX0 from target); short pin to support hot plugging
S4 GND Second mate to ground
S5 TX0– Negative (TX0 to target); short pin to support hot plugging
S6 TX0+ Positive (TX0 to target); short pin to support hot plugging
S7 GND Second mate to ground
Table 11: Secondary SAS Signal Segment Pin Assignments – Back Side
Signal Name Type Description
S8 GND Second mate to ground
S9 RX1+ Positive (RX1 from target); short pin to support hot plugging
S10 RX1– Negative (RX1 from target); short pin to support hot plugging
S11 GND Second mate to ground
S12 TX1– Negative (TX1 to target); short pin to support hot plugging
S13 TX1+ Positive (TX1 to target); short pin to support hot plugging
S14 GND Second mate to ground
S600DC Series 2.5-Inch SAS NAND Flash SSD
Physical Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 12 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 12: SAS Power Segment Pin Assignments
Signal Name Type Description
P1 V3.3 Reserved; short pin to support hot plugging; behind a SAS drive plug connector, P1 and P2
are connected only to each other.
P2 V3.3 Reserved; short pin to support hot plugging; behind a SAS drive plug connector, P1 and P2
are connected only to each other.
P3 V3.3 SAS power disable.
P4 GND Ground
P5 GND Ground
P6 GND Ground
P7 V5 5V power (charge)
P8 V5 5V power; short pin to support hot plugging.
P9 V5 5V power; short pin to support hot plugging.
P10 GND Ground
P11 DAS Ready/Drive activity LED; short pin to support hot plugging.
P12 GND Ground
P13 V12 12V power (charge)
P14 V12 12V power; short pin to support hot plugging.
P15 V12 12V power; short pin to support hot plugging.
S600DC Series 2.5-Inch SAS NAND Flash SSD
Physical Configuration
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 13 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

SAS Features
Task Management
Table 13: Task Management Functions
Task Name Supported
Abort task Y
Abort task set Y
Clear ACA Y
Clear task set Y
I_T nexus reset Y
Logical unit nexus reset Y
Query task Y
Query task set Y
Query asynchronous event Y
Task Management Responses
Table 14: SAS Response to Task Management Functions
Function Name Response Code
Function complete 0
Invalid frame 2
Function not supported 4
Function failed 5
Function succeeded 8
Invalid logical unit 9
Thin Provisioning
The device supports thin provisioning and the READ CAPACITY 16 (9Eh) command, but
the level of thin provisioning support varies by product model. Thin provisioning re-
turns a default data pattern from a READ command to a logical block even when that
block is not mapped to a physical block by a previous WRITE command.
To determine whether thin provisioning is supported and which of its features are im-
plemented, a READ CAPACITY 16 (9Eh) command must be issued to the drive. The
LBPME (logical block provisioning management enabled) bit settings indicate whether
the logical unit implements LBPM (logical block provisioning management). The
LBPME and LBPRZ (logical block provisioning read zeros) bit settings are shown in the
table immediately below.
S600DC Series 2.5-Inch SAS NAND Flash SSD
SAS Features
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 14 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 15: Product Configuration and Bit Settings
Bit
Product Configuration
Bit Settings Description
SED
Support
Non-SED
Support
LBPME Y Y LBPME = 1 (Logical unit is thin
provisioned)
LBPM is implemented.
LBPME = 0 (Logical unit is fully
provisioned)
LBPM is not implemented.
LBPRZ N Y LBPRZ = 1 For an unmapped LBA specified by a READ opera-
tion, the device server sends to the data-in buffer
user data with all bits set to 0.
LBPRZ = 0 For an unmapped LBA specified by a READ opera-
tion, the device server sends to the data-in buffer
user data with all bits set to any value.
UNMAP Command
The UNMAP command requests that the device server break the association of a specif-
ic LBA from a physical block, thereby freeing up the physical block from use and no lon-
ger requiring it to contain user data. An unmapped block will respond to a READ com-
mand with data that is determined by the setting of the LBPRZ bit in the read capacity
parameter data.
Protection Information (PI) and Security (SED)
Requirements in this section apply to any device that supports LBA unmapping. In a
SCSI device, an umapped LBA is defined as part of the thin provisioning model, whose
support is indicated by an LBPME bit value of 1 in the read capacity parameter data.
When a cryptographic ERASE command erases a region of LBAs, the drive unmaps
those LBAs. And when the host attempts to access an unmapped or trimmed LBA, the
drive returns scrambled data.
For a given LBA, data is identical from access to access until it is either updated from
the host or is cryptographically erased. Then the drive reports an LBPRZ bit value of 0 in
the read capacity parameter data
When the host attempts access to an unmapped LBA on a drive that has been formatted
with protection information (PI), the drive returns scrambled PI data for that LBA.
Depending on the value of the RDPROTECT field in the data-access command CDB, the
drive might return a standard PI error to the host. When a host reduces a drive's ad-
dressable capacity via a MODE SELECT command, the drive unmaps or trims any LBA
within the inaccessible region of the device. Additionally, an UNMAP command is not
permitted on a locked band. PI and SED drive configuration information is shown be-
low.
S600DC Series 2.5-Inch SAS NAND Flash SSD
SAS Features
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 15 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 16: PI and SED
PI and SED Bit Definition
Drive Configuration
Standard (Non-SED) SED
PI setting Disabled Enabled Disabled Enabled
PROT_EN bit 0 1 0 1
LBPME bit 1 1 1 1
LBPRZ bit 1 1 0 0
PI check requested NA Yes No NA Yes No
DATA returned for thin
provisioned LBA
0x00 0x00 0x00 Random None Random
PI returned for thin
provisioned LBA
None 0xFF 0xFF None None Scrambled PI
data
PI check performed NA No No NA Yes No
Error reported to host No No No None Yes No
S600DC Series 2.5-Inch SAS NAND Flash SSD
SAS Features
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 16 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Format Unit
The device may be formatted either as a thin provisioned device or a fully provisioned
device. Thin provisioned is the default format and is recommended for most applica-
tions. Thin provisioning provides the most flexibility for the device to manage the Flash
medium to maximize endurance.
Table 17: Format Unit Command Execution Times for 512-Byte LBAs
Format
Mode
DCRT
Bit
IP
Bit
All S600DC Series Devices (Capacity in GB)
Unit200 400 480 800 960 1600 1920 3200 3840
Non-SED Configuration
Thin
provisioned
(Default)
0 0 5 5 5 5 5 5 5 5 5 minutes
Thin
provisioned
(Default)
1 0 5 5 5 5 5 5 5 5 5
Fully
provisioned
0 1 10 10 10 10 10 10 10 10 10
Fully
provisioned
1 1 10 10 10 10 10 10 10 10 10
SED Configuration
Thin
provisioned
(Default)
0 0 5 5 5 5 5 5 5 5 5 minutes
Thin
provisioned
(Default)
1 0 5 5 5 5 5 5 5 5 5
Fully
provisioned
0 1 430 430 430 430 430 430 430 430 430
Fully
provisioned
1 1 280 280 280 280 280 280 280 280 280
S600DC Series 2.5-Inch SAS NAND Flash SSD
Format Unit
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 17 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Commands
Table 18: SAS Command Set and Additional Supported Bits – SED and Non-SED
Command
Op-Code
(Hex)
Sub-Command/
Functional Bit Description Supported
CHANGE DEFINITION 40 – – No
FORMAT UNIT 04 – – Yes
DPRY bit – No
DCRT bit – Yes
STFP bit – Yes
IP bit – Yes
DSP bit – Yes
IMMED bit – Yes
VS Vendor specific No
INQUIRY (12) 12 – – Yes
B0h Block limits page Yes
B1h Block device characteristics Yes
C1h Date code page Yes
C3h Device behavior page Yes
83h Device identification page Yes
86h Extended inquiry data page Yes
C0h Firmware numbers page Yes
C2h Jumper setting page No
8Ah Power condition page Yes
8Dh Power consumption page Yes
00h Supported vital product data
page
Yes
B2h Thin provisioning page Yes
80h Unit serial number page Yes
D1h Vendor unique page Yes
D2h Vendor unique page Yes
LOG SELECT (10) 4C – – Yes
PCR bit – Yes
DU bit – No
DS bit – Yes
TSD bit – Yes
ETC bit – No
TMC bit – No
LP bit – No
S600DC Series 2.5-Inch SAS NAND Flash SSD
Commands
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 18 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 18: SAS Command Set and Additional Supported Bits – SED and Non-SED (Continued)
Command
Op-Code
(Hex)
Sub-Command/
Functional Bit Description Supported
LOG SENSE (10) 4D – – Yes
0Fh Application client log page Yes
15h Background scan results log
page
Yes
01h Buffer over-run/under-run page No
37h Cache statistics page Yes
3Eh Factory log page Yes
2Fh Information exceptions log page Yes
0Bh Last n deferred errors or async
events page
No
07h Last n error events page No
06h Non-medium error page Yes
00h Page support list Yes
1Ah Power conditions transitions
page
Yes
18h Protocol-specific port log page Yes
03h Read error counter page Yes
04h Read reverse error counter page No
10h Self-test results page Yes
11h Solid state media log page Yes
0Eh Start-stop cycle counter page Yes
0Dh Temperature page Yes
38h Vendor unique page Yes
3Ch Vendor unique page Yes
05h Verify error counter page Yes
02h Write error counter page Yes
S600DC Series 2.5-Inch SAS NAND Flash SSD
Commands
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 19 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.

Table 18: SAS Command Set and Additional Supported Bits – SED and Non-SED (Continued)
Command
Op-Code
(Hex)
Sub-Command/
Functional Bit Description Supported
MODE SELECT (6)
MODE SELECT (10)
MODE SENSE (6)
MODE SENSE (10)
15
55
1A
5A
– – Yes
08h Caching parameters page Yes
0Ah Control mode page Yes
02h Disconnect/reconnect page Yes
01h Error recovery page Yes
03h Format page No
1Ch Information exceptions control
page
Yes
1Ch/01h Background scan mode subpage Yes
18h Protocol-specific LUN mode page Yes
19h Protocol-specific port page Yes
19h/01h Physical control and discover
subpage
Yes
19h/03h Enhanced physical control sub-
page
Yes
1Ah Power condition page Yes
00h Unit attention page Yes
07h Verify error recovery page Yes
10h XOR control page No
PERSISTENT RESERVE IN 5E – – Yes
– – Yes
00h Read keys Yes
01h Read reservations Yes
02h Read capabilities Yes
PERSISTENT RESERVE OUT 5F – – Yes
03h Clear Yes
04h Preempt Yes
05h Preempt and abort Yes
00h Register Yes
06h Register and ignore existing keys Yes
07h Register and move Yes
02h Release Yes
08h Replace lost reservation Yes
01h Reserve Yes
READ (6) 08 – – Yes
READ (10) 28 – – Yes
DPO bit supported – Yes
FUA bit supported – Yes
S600DC Series 2.5-Inch SAS NAND Flash SSD
Commands
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN 20 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2015 Micron Technology, Inc. All rights reserved.