MicroNX AnyXing 300D User manual

USER’s MANUAL
Reference for safety/
Please read this reference carefully and use
this unit properly. Reference is for keeping
safety and preventing damage of property.
- 300D
- 300S

Components
① CONTROL UNIT
(1pcs)
①
⑧ Carbon Brush(1pair)
⑨ Chuck Wrench(1pcs)
②②Handpiece(1pcs)
③③ Handpiece 3 pin Cord
(1pcs)
④ Foot Speed Control
(Optional)
⑤ On/Off Switch
(Optional)
④
⑦ Power Cord(1pcs)
⑤
⑥ Rubber Stand(1pcs)
⑥
⑦
⑧ ⑨
50

Installation
While working
Reference for safety
- Do not install on unstable location.
- Do not drop or shock while motor rotating.
- Please keep all vents opened
- Do not leave a motor being turned on.
- Do not turn off power switch when motor is on.
- Please wear protective goggles to prevent
eyes when cutting or grinding.
- Do not install in a location where exposed a direct
ray of light.
- Please use in a place where temperature is from
0 degree to 40 degree centigrade.
- Please don't use in high temperature and
humidity or in the dust.

Electric power
Main Power
■ Please insert power cord to outlet after confirming AC
100~120V 50/60Hz or AC 200~240V 50/60Hz.
■ This unit is set with AC200~240V 50/60Hz when
taking goods out of the company.
■ Fuse Specification
- 250V 3A
AC 110~220V, 50/60Hz
FOOT
PEDAL
MICRO-NX CO., LTD
MAD E I N K ORE A
INP UT : 110 /22 0V, 50/60Hz
OUT PUT : DC30V 2A
SER IAL NO. :
220V

Warning/Notice
!!
!!
Others
- Please prevent the machine from coming food and
other substances.
- Do not drop alcohol or benzene as there is fire
danger.
- Do not assembly, repair, modify recklessly.
Warning This mark is used
when user’s misusing can
cause death or severe injury
!!Notice This mark is used
when user’s misusing can
cause a property loss

!!
Electric connection
■ Please connect the handpiece cord plug to motor
connector of control unit after confirming direction.
■ Please connect the foot-pedal plug and power cord
on rear of control unit after confirming direction.
After connecting all cords, please check safety and
then insert power cord to outlet.
Handpiece
Cord Plug
Foot Pedal
Cord Plug Power Cord Plug
Notice
50
FOOT
PEDAL
MICRO-NX CO., LTD
MADE IN KO REA
INPU T : 110/ 220V, 50/60 Hz
OUTP UT : D C30V 2A
SERI AL NO. :
220V

Speed control knob
Motor Connector
AC socket
Foot Pedal
Connector
Power Switch
Front
Rear
Power Connector Fuse Holder
Part name
50
FOOT
PEDAL
MICRO-NX CO., LTD
MADE IN KO REA
INPU T : 110/ 220V, 50/60 Hz
OUTP UT : D C30V 2A
SERI AL NO. :
220V
Speed Display
Power ON button Reset button
Hand/Foot mode
button
Label
LED lamp Setting lamp
Wing cover
Body
Forward/Reverse
button

Specification
■ Control Unit
250V 3A 81 * 222 *166
2.2KG
2.5A DC 0 - 32V
110/220V
50/60Hz
120 W
Anyxing-300D
Anyxing-300S
110/220V 2A DC 0 - 32V 100 W 250V 3A 1.8KG 78 * 222 *166
50/60Hz