Microsemi PD70222EVB User manual

Evaluation Board User Guide
PRODUCTION DATA
Microsemi and is
current as of publication date.
modified in any way without the express written consent of Microsemi. Product
processing does not necessarily inc
reserves the right to change the configuration and performance of the product and
to discontinue product at any time.
PD70222EVB
Evaluation Board
PD70222EVB
Ideal Diode Bridge
Evaluation Board User Guide
Revision 0 2
PRODUCTION DATA
–
Information contained in this document is proprietary to
current as of publication date.
This document may not be
modified in any way without the express written consent of Microsemi. Product
processing does not necessarily inc
lude testing of all parameters.
Microsemi
reserves the right to change the configuration and performance of the product and
to discontinue product at any time.
Evaluation Board
– User Gui d e
Information contained in this document is proprietary to
This document may not be
modified in any way without the express written consent of Microsemi. Product
Microsemi
reserves the right to change the configuration and performance of the product and

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
Table of Contents
1 A BOUT THIS G UIDE
1.1 Audience ................................
................................
1. Organization
................................
1.3 Reference Documents
................................
2 I NTRODUCTION
.1
Evaluation Boards Ordering Information
. Evaluation Board Features
................................
3 P HYSICAL D ESCRIPTION
3.1 Physical Characteristics
................................
3. Package Contents
................................
3.3 Connectors ................................
................................
3.4 Indications ................................
................................
4 E LECTRICAL C HARACTERISTICS
5 I NSTALLATION
5.1
Preliminary Considerations and Safety Precautions
5. Initial Configuration
................................
6 S CHEMATIC
7 L IST OF M ATERIALS
8 B OARD L AYOUT
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
................................
................................
................................
................................
................................................................
................................
................................
................................
................................
Evaluation Boards Ordering Information
................................................................
................................
................................
................................
................................
................................
................................
................................
................................
................................................................
................................
................................
................................
................................
................................
................................
................................
Preliminary Considerations and Safety Precautions
................................
................................
................................
................................................................
................................
PD70222EVB Evaluation Board
– U ser Gui d e
Page
7100 Fax: (949) 756
-0308
3
................................
.................. 3
................................
............. 3
................................
............................. 3
4
................................
.. 5
................................
...................... 5
6
................................
........................... 6
................................
.... 6
................................
............... 6
................................
................ 8
8
9
................................
................ 9
................................
.. 9
10
12
13

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
1 About this Guide
This user guide provides both
description and operation procedures for Microsemi's
board type is used for evaluating
the performance of
current PD devices.
PD70 device supports
x 1 Amp inputs received from PSE side.
This current level supports full HDBaseT
device which is PD front end for High current applications,
PD70 10ILQ device supports both
HDBASET
The board supports a 95 Watt output
at the received voltage level
1 1 Audience
This user guide
is intended for qualified personnel,
basic concepts of electronics.
1 2 Organization
This guide is
arranged according to the
Chapter 1 About this Guide: D
escribes the objectives
Chapter Introduction: Provides
an
characteristics and ordering information.
Chapter 3 Physical Description: P
rovides explanation related to the physical description (switches, jumpers,
connectors).
Chapter 4
Electrical Characteristics
Chapter 5 Installation: Provides a
description of the installation process.
Chapter 6 Schematic: Provides a
board schematic diagram
Chapter 7 List of Materials: P
rovides
Chapter 8 Board Layout: P
rovides board
1 3 Reference Documents
PD70
datasheet, catalog number
PD70 10
datasheet, catalog number
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
description and operation procedures for Microsemi's
PD70 EVB
the performance of
PD70 device
which is Ideal Bridge targeted for High
x 1 Amp inputs received from PSE side.
This current level supports full HDBaseT
power.
The current from PD70 diode bridge
device which is PD front end for High current applications,
HDBASET
standard or standard twice IEEE
80 .3at PD application interfac
at the received voltage level
.
is intended for qualified personnel,
that is,
operators and technicians who have a background in
arranged according to the
following:
escribes the objectives
, audience, and organization.
an
overview about evaluation board’s
main functions, features, physical
characteristics and ordering information.
rovides explanation related to the physical description (switches, jumpers,
Electrical Characteristics
: P
rovides electrical characteristics of the evaluation board.
description of the installation process.
board schematic diagram
.
rovides
the board’s list of materials.
rovides board
Gerber files description for all layers.
datasheet, catalog number
DS_PD70
datasheet, catalog number
DS_PD70 10 and PD70 10A
PD70222EVB Evaluation Board
– U ser Gui d e
Page 3
7100 Fax: (949) 756
-0308
PD70 EVB
board. This
which is Ideal Bridge targeted for High
The current from PD70 diode bridge
flows to PD70 10ILQ
80 .3at PD application interfac
e.
operators and technicians who have a background in
main functions, features, physical
rovides explanation related to the physical description (switches, jumpers,
rovides electrical characteristics of the evaluation board.

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
2 Introduction
Microsemi’s PD70 10ILQ
device is part of a family of
multi 80 .3at standard PD interface.
The PD interface
family of devices includes the following:
Device type
PD70 10ILD Twin
HDBASET
PD70 10A ILD Twin
HDBASET
adapter connection
PD70 11 ILQ Twin
HDBASET
adapter connection
PD70 ILQ
Ideal diode bridge
Microsemi’s PD70 EVB
Evaluation Board
evaluating
the performance and implementation of
The board uses a single PD device,
PD70 10ILQ
the /4 Pairs of the Cat5 cable. PD70
10
IEEE80 .3AT Type interface.
All necessary steps and connection
instructions required to install and operate this board are provided within this
document.
RJ45
Data
+
Power
Pulse
XFMR
Figure
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
device is part of a family of
devices which are targeted for realizing the
family of devices includes the following:
Power Capability
Integrates
HDBASET
ports No
HDBASET
ports supporting Wall
adapter connection
No
HDBASET
ports supporting Wall
adapter connection
Yes
Ideal diode bridge
Evaluation Board
(see Figure ) provides designers with the
environment
the performance and implementation of
PD applications based on
PD70 and
PD70 10ILQ
, to support the Detection, Class,
and Power
10
ILQ supports a standard Twin HDBASET
interface and compatible to
instructions required to install and operate this board are provided within this
PD70210
PD front
end
Pulse
XFMR
Vout
conn
ector
PD70222
Ideal Diode
ridge
Vin
Vin Vin
Vin
Combined
CombinedCombined
Combined
Vin
VinVin
Vin Vou
VouVou
Vou
t
tt
t
Figure
1: PD70222EVB Block Diagram
PD70222EVB Evaluation Board
– U ser Gui d e
Page 4
7100 Fax: (949) 756
-0308
devices which are targeted for realizing the
HDBASET or
Integrates
PWM Controller
environment
needed for
PD70 and
PD70 10 devices.
and Power
Supplying phases on
interface and compatible to
instructions required to install and operate this board are provided within this
Vout
conn
ector

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
Figure 2:
PD70222EVB
2 1
Evaluation Boards Ordering Information
Microsemi’s supplies the following
Evaluation Boards:
Ordering Number
PD70 EVB
Dual
2 2
Evaluation Board Features

Designed to support Data and Spare current
 Data and Power In
RJ45 connector (
 Output voltage connector.

On board Power Good LED indicator

On board AT detected LED indicator
 On board 4P_
AT detected LED indicator
 On board HD
detected LED indicator
 On board 4P_HD
detected LED indicator

Evaluation Board working temperature: 0° to +70°C
 RoHS compliant
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
PD70222EVB
Evaluation Board –
General View
Evaluation Boards Ordering Information
Evaluation Boards:
Description
Dual
IEEE80 .3AT Type PD
/ Twin HDBaseT board
device
. Using PD70 Ideal diode bridge
Evaluation Board Features
Designed to support Data and Spare current
using a single PD70 10 device
RJ45 connector (
.
On board Power Good LED indicator
On board AT detected LED indicator
AT detected LED indicator
detected LED indicator
detected LED indicator
Evaluation Board working temperature: 0° to +70°C
PD70222EVB Evaluation Board
– U ser Gui d e
Page 5
7100 Fax: (949) 756
-0308
/ Twin HDBaseT board
, based on PD70 10
. Using PD70 Ideal diode bridge

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
3
Physical Description
3 1 Physical Characteristics
The following table lists the
evaluation board’s physical characteristics.
Parameter
Mechanical dimensions in mm
3 2 Package Contents
Upon opening the Evaluation Board package, verify
local representative or Microsemi's h
eadquarters.
Package content for standard shipments
PD70 EVB Evaluation Board
3 3 Connectors
The following sections provide both general and detailed information regarding unit
3 3 1 Connectors Table
Lists of
the Evaluation Board's connectors.
# Connector
Name
1 J1
RJ45 Connector
J5
PD device Output
3 J4,J6
PD device Output
3 3 2
Connectors Detailed Explanation
The
numbering is in reference to the numbers listed in
1 RJ45 Connector
There is a Data+Power
dedicated RJ45 connector, See
CON1 Pin No
Signal Name
1,
Data and
3, 6
Data and Power In
4, 5
Data and Power In
7, 8
Data and Power In
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
Physical Description
evaluation board’s physical characteristics.
Table 1: Physical Characteristics
Value
134 x 45 x 19mm (L x W x H)
Upon opening the Evaluation Board package, verify
the following part is included; If i
t seems damaged, contact
eadquarters.
Package content for standard shipments
is:
The following sections provide both general and detailed information regarding unit
’s
connectors.
the Evaluation Board's connectors.
Table 2: Connectors List
Name
Description
RJ45 Connector
RJ45
port for Data and Power In for PSE connection
PD device Output
Terminal blocks for connecting a load to output regulator.
PD device Output
Banana Jacks for connecting a load to output regulator.
Connectors Detailed Explanation
numbering is in reference to the numbers listed in
the schematics.
dedicated RJ45 connector, See
Figure 3.
Table 3: RJ45 Connectors
Signal Name
Description
Data and
Power In
Data and power input to powered device (
Master Negative data port)
Data and Power In
Data and power input to powered device (
Master Positive data port)
Data and Power In
Data and power input to powered device (
Master Positive data port)
Data and Power In
Data and power input to powered device (
Master Negative data port)
PD70222EVB Evaluation Board
– U ser Gui d e
Page 6
7100 Fax: (949) 756
-0308
t seems damaged, contact
connectors.
port for Data and Power In for PSE connection
Terminal blocks for connecting a load to output regulator.
Banana Jacks for connecting a load to output regulator.
Description
Data and power input to powered device (
HDBASET
Data and power input to powered device (
HDBASET
Data and power input to powered device (
HDBASET
Data and power input to powered device (
HDBASET

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
2 V
out
Connectors
See Figure 4.
J5 – DCDC output connection, used
for
For easy connection, Black and Red Banana jacks are parallel to J5 connections.
Pin No
Signal Name
J5 (Left)- Pin 1 Vout
_Rtn
J5 (Right)-Pin Vout
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
Figure 3: Front RJ45 Connector
for
connecting to external load .
For easy connection, Black and Red Banana jacks are parallel to J5 connections.
Table 4: J5 Connector (Green)
Signal Name
Description
_Rtn
Return PD received output
voltage
Positive PD received
output voltage
Figure 4: V
out
Connectors
PD70222EVB Evaluation Board
– U ser Gui d e
Page 7
7100 Fax: (949) 756
-0308
Description
voltage
output voltage

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
3 4 Indications
The following
sections provide general information regarding unit indications.
3 4 1 LED Indication
See Figure 5.
D14
is the Power_GOOD indication LED, a
operated.
In all operating state this flag is
D1 is the AT_FLAG indicatio
n LED, a
class event from the PSE side in the class stage. The flag will be operative at 3,
D10 is the 4P_AT indication LED, a
PD70 10
class event from the PSE side in the class stage, or a finger class event from the PSE side in the class stage
and SUPP_Sa and SUPP_Sb are both High.
The flag will be operative at 6 fin
gers detection as well.
D11 is the HD_FLAG
indication LED, a
class event from the PSE side in the class stage.
The flag will be operative at 6 fingers detection as well.
D9 is the 4P_HD indication LED, a
PD70 10
class event from the PSE side in the class stage.
4
Electrical Characteristics
Evaluation board
electrical characteristics are described below:
Parameter
RJ45 connector
Maximum Available Current
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
sections provide general information regarding unit indications.
is the Power_GOOD indication LED, a
PD70 10 device output signal indicating
the
In all operating state this flag is
lit.
n LED, a
PD70 10 device output signal indicating the
device
class event from the PSE side in the class stage. The flag will be operative at 3,
4,
and 6 fingers detection as well.
PD70 10
device output signal indicating the
device
class event from the PSE side in the class stage, or a finger class event from the PSE side in the class stage
and SUPP_Sa and SUPP_Sb are both High.
gers detection as well.
indication LED, a
PD70 10 device output signal indicating the
device
class event from the PSE side in the class stage.
The flag will be operative at 6 fingers detection as well.
PD70 10
device output signal indicating the device
has detected a
class event from the PSE side in the class stage.
Figure 5: LED Indications
Electrical Characteristics
electrical characteristics are described below:
Table 5: Electrical Characteristics
Parameter
Min Max
37 57
Maximum Available Current
.
PD70222EVB Evaluation Board
– U ser Gui d e
Page 8
7100 Fax: (949) 756
-0308
the
device isolation switch is
device
has detected a finger
and 6 fingers detection as well.
device
has detected a 4 finger
class event from the PSE side in the class stage, or a finger class event from the PSE side in the class stage
,
device
has detected a 3 finger
has detected a
6 finger
V
A

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
5 Installation
5 1
Preliminary Considerations
Verify board's power supply is turned off before all peripheral devices are connected.
Note
: In maximum power at the output, some of the devices
degrees). Pay attention while testing these devices.
5 2 Initial Configuration
Note: Prior to starting any operation, i
t is important to verify
6.
1. Connect load to main board (J1).
. Connect a Cat5 cable from PSE
to
Power supply to Evaluation Board (
3. W
hen there is a need to test the Ethernet data,
PD Ethernet Host.
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
Preliminary Considerations
and Safety Precautions
Verify board's power supply is turned off before all peripheral devices are connected.
: In maximum power at the output, some of the devices
may reach
high temperatures (still less than 70
degrees). Pay attention while testing these devices.
t is important to verify
that the Evaluation Board
is
to
Evaluation Board (CON1). Alternatively connect
a power cable from
Power supply to Evaluation Board (
J ).
hen there is a need to test the Ethernet data,
connect Ethernet cable from E
valuation Board (CON ) to
Cat
CatCat
Cat5
5 5
5
cable
cablecable
cable
Electronic Load
Electronic LoadElectronic Load
Electronic Load
Power
PowerPower
Power
Cable
CableCable
Cable
DC output
DC outputDC output
DC output
PSE
PSEPSE
PSE
Data
Data Data
Data +
+ +
+
Power
PowerPower
Power
input
input input
input Cat
CatCat
Cat5
5 5
5
cable
cablecable
cable
Figure 6: Test Setup
PD70222EVB Evaluation Board
– U ser Gui d e
Page 9
7100 Fax: (949) 756
-0308
high temperatures (still less than 70
is
setup as shown in Figure
a power cable from
valuation Board (CON ) to

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
6 Schematic
PD-70
PD-MLPQ40-6X8
OUTP_1
1
OUTP_
OUTP_3
3
NC
4
IN B_5
5
IN B_6
6
IN B_7
7
IN B_8
8
NC_9
9
OUTN_10
10
OUTN_11
11
OUTN_1
1
IN A_13
13
IN A_14
14
NC_15
15
SUPP_SA
16
SUPP_SB
17
NC_18
18
IN1A_19
19
IN1A_ 0
0
OUTP_3
OUTP_31
OUTP_30
IN1B_ 8
IN1B_ 7
IN1B_ 6
IN1B_ 5
OUTN_ 3
OUTN_
OUTN_ 1
EX_OUTN 41
IN A_40 40 IN A_39 39
NC_38 38 NC_37 37 NC_36 36 NC_35 35
IN1A_34 34 IN1A_33 33
EX_OUTP 4
Power_spare-
Power_spare+
Power_Data-
Power_Data+
Power_Data-
Power_Data+
POWER + DATA INPUT
Power_Data-
Power_spare+
IN6
IN7
IN8
IN
IN3
IN4
IN5
12345678
J1
SS71800-007F
RJ45-I
11
33
44
55
66
77
88
99
10 10
IN1
T1
VP6014 LF
BEL-S558-10GB-0 V
N.C
13 15 14 16 18 17 19 1 0 4 3
1 10 11
9 7 8 6 4 5 3 1
Power_Data+
VPP
VPNin
SUPP_S1 SUPP_S
J7
5558397-1
rj45-5
N.C
1
3
4
5
6
7
8
9
10
t
t1
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
Figure 7: Board Schematics (1 of 2)
VAUX
VPNin
tp135x70
HK- -G-S05
1
VPNout
tp135x70
HK- -G-S05
1
U
OUTP_3
3
OUTP_31
31
OUTP_30
30
NC_ 9 9
IN1B_ 8
8
IN1B_ 7
7
IN1B_ 6
6
IN1B_ 5
5
NC_ 4 4
OUTN_ 3
3
OUTN_
OUTN_ 1
1
+
C7
uF
100V
ALU
D8H1 F3_5
N.C
Power_Data+
Power_Data+
Power_spare-
VPP
VPNin
SUPP_S1_R
SUPP_S _R
TP 1
TP1 1
R3
4.9K
PD-0603
HD_FLAG
4P_HD_FLAG
C4
100n
100V
R1
30.9
PD-0603
R
60.4K
PD-0603
WA_EN
+
C6
uF
100V
ALU
D8H1 F3_5
N.C
C
1uF
PD-0603
RDET
R143
0
PD-0603
R144
0
PD-0603
N.C
PGOOD
RREF
RCLASS
4P_AT_FLAG
VAUX
1
VPP
tp135x70
HK- -G-S05
1
VPP
AT_FLAG
VPP
D3
SMAJ58A
N. C
1
VPNin
VPNin VPNout
U1
PD-70 10A
PD-DFN-16-5X4
VPP
1
RDET
SUPP_S1
3
SUPP_S
4
RREF
5
RCLS
6
VPN_IN 7
7
VPN_IN 8
8
VAUX 16
WA_EN 15
4P_HD_FLAG 14
4P_AT_FLAG 13
HD_FALG 1
AT_FLAG 11
VPN_OUT10 10
VPN_OUT9 9
Trm_P
17
C1
100v
100nF
PD70222EVB Evaluation Board
– U ser Guide
Page 10
7100 Fax: (949) 756
-0308
R136 0PD-0805 N.C
R137 0PD-0805 N.C
R138 0PD-0805 N.C
R75
0K
PD-1 06
C3
100v
100nF
N.C
J4
CON-F60 - P
571-0500
1
1
J6
CON-F60 - P
571-0100
11
J5
1
1
33 44
SW1
SW-4P
78F01S
1
3
4

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
C88
000V
1n
X7R
Power_spare+
Power_Data-
C37
100V
10n
X7R
PD-0805
Power_spare-
C35
100V
10n
X7R
PD-0805
C38
100V
10n
X7R
PD-0805
C36
100V
10n
X7R
PD-0805
R139
75
PD-0805
R141
75
PD-0805
R140
75
PD-0805
R14
75
PD-0805
Power_Data+
J
RAPC7 X-TB13
SWITCHCRAFT-RAPC7
3
1
D13
PD-SMA
1
WA_VPP
WA_EN
R149
47K
PD-0805
R150
3.4K
PD-0805
C90
100V
10n
X7R
PD-0805
VPNout
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
Figure 8: Board Schematics (2 of 2)
VPP
4P_HD_FLAG
4P_HD
1
4P_AT
1
C5
100v 100nF N.C
VAUX
JP11
CVILUX-CH8 -10P-V
1
1
3
344
5
566
7
788
9
910 10
4P_HD_FLAG
AT_FLAG
PGOOD
HD_FLAG
4P_AT_FLAG
VPNout
D9
Super Y ellow Green
1
VPP
R71
0K
PD-1 06
PD-1 06-W
4P_AT_FLAG
D10
Super Y ellow Green
1
VPP
R7
0K
PD-1 06
PD-1 06-W
PD70222EVB Evaluation Board
– U ser Guide
Page 11
7100 Fax: (949) 756
-0308
4P_AT
HD_FLAG
1AT_FLAG 1
CVILUX-CH8 -10P-V
R7
0K
PD-1 06
PD-1 06-W
HD_FLAG
D11
Super Y ellow Green
1
VPP
R73
0K
PD-1 06
PD-1 06-W
AT_FLAG
D1
Super Y ellow Green
1
VPP
R74
0K
PD-1 06
PD-1 06-W

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
7 List of Materials
# Item Description
1 CAP CRM 10nF 100V 5%
X7R 0805 SMT
CAP CRM 1nF/ 000V X7R 1 06
3 CAP CRM 100nF 100V 10%
X7R 1 06 SMT
4 Capacitor,X7R, 1uF, 5V, 10%
0603
5 Capacitor, X7R, 100nF,100v,
10%
6 PIN HEADER *5 PINs
SMT 0.1"
7 CON RJ45 SINGLE 8 POS
8 Banana Socket Red
9 Banana Socket Black
10 Terminal block
11 Ideal Diode Bridge dual bridge
SMT
1 LED SuperYelGrn 0603 SMD
13 RES 75R 1 5mW 1% 0805 SMT
14 Resistor, 0 Ohm, 5%, 1/16W
040
15 RES TCK FLM 7.87K 1%
6 .5mW
040 SMT
16 RES TK FLM 0K 50mW
1% 1 06
17 RES TCK FLM 0R 6 .5mW 5%
0603 SMT
18 RES TCK FLM 4.9K 6 .5mW
1%
0603 SMT
19 Resistor, 30.9R 1%, 1/10W
0603
0 RES TCK FLM 60.4K 6 .5mW
1%
0603 SMT
1 DIP SWITCH Positions 1 pole
T/H
High Power Front-End PD IF
SMT
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
Qty Ref Des Manufacturer
4 C35-C38 AVX
SMT 1 C88 AVX
1 C4 AVX
0603
1 C Murata
10%
0603 1 C1 Murata
SMT 0.1"
1 JP11 CviLux
1 J1 Bel Stewart
1 J4 Deltron
1 J6 Deltron
1 J5 DINKLE
SMT
1 U Microsemi
5 D9-D1 ,D14 Everlight
4 R139-R14 Bourns
040
8 R1 8-R135 ASJ
6 .5mW
R151,R15 Bourns
1% 1 06
6 R71-R76 Bourns
1 R144 ASJ
1%
1 R3 ASJ
0603
1 R1 KOA
1%
1 R ASJ
T/H
1 SW1 Grayhill
SMT
1 U1 Microsemi
PD70222EVB Evaluation Board
– U ser Gui d e
Page 1
7100 Fax: (949) 756
-0308
Manufacture P\N
08051C103JAT A
1 06GC10 KAT1A
1 061C104KAT A
GRM188R71E105KA1 D
GRM188R7 A104KA35D
CH81-10 M100-00
SS71800-007F
571-0500
571-0100
DT-1 3RA-0 P
PD70
19- 1-SYGCS530E3TR8
CR0805-FX-75R0-ELF
CR10-000ZK
CR040 -FX-7871-ELF
CR1 06-FX- 00 -ELF
CR16-000ZL
CR16- 49 FL
RK73H1JTTD30R9F
CR16-604 FL
7801T
PD70 10ILD

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
8 Board Layout
This paragraph presents
the layout of the evaluation board.
The board is a layer board. The
layers are Oz layers.
of the board for tracking
devices placements.
Figure
Figure
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
the layout of the evaluation board.
layers are Oz layers.
Below figures present the two
copper layers and the silk
devices placements.
Figure
9: PD70222EVB PCB Silk Top
Figure
10: PD70222EVB PCB Top Copper
PD70222EVB Evaluation Board
– U ser Gui d e
Page 13
7100 Fax: (949) 756
-0308
copper layers and the silk

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
Figure
Figure
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
Figure
11: PD70222EVB PCB Silk Bottom
Figure
12: PD70222EVB PCB Bottom Copper
PD70222EVB Evaluation Board
– U ser Gui d e
Page 14
7100 Fax: (949) 756
-0308

Copyright © 013
Rev. 0. 01-May-13
1 Enterprise, Aliso Viejo, CA 9 656, USA
The information contained in the document is PROPRIETARY AND CONFIDENTIAL information of
Microsemi
and cannot be copied published uploaded posted transmitted distributed or disclosed or
used without the express duly signed written consent of Microsemi If the recipient of this document has
entered into a disclosure agreement with Microsemi then th
This document and the information contained herein may not be modified by any person other than
authorized personnel of Microsemi. No license under any patent copyright trade secret or other
intellectual p
roperty right is granted to or conferred upon you by disclosure or delivery of the
information either expressly by implication inducement estoppels or otherwise. Any license under
such intellectual property rights must be approved by Microsemi in wri
Microsemi.
Microsemi reserves the right to change the configuration functionality and performance of its products
at anytime without any notice. This product has been subject to limited testing and should not be used
in conjunction with life-
support or other mission
no liability whatsoever and Microsemi disclaims any express or implied warranty relating to sale and/or
use of Microsemi products including liability or warr
merchantability or infringement of any patent copyright or other intellectual property right. The product
is subject to other terms and conditions which can be located on the web at
http://www.microsemi.com/legal/tnc.asp
Revision History
Revision Level / Date
Para Affected/Page
0.1 / 30-April-13
0. / 01-May-13
© 2013 Microsemi Corp
All rights reserved
For support contact:
[e-mail]
Visit our web site at:
www.microsemi.com
PD70222EVB Evaluation Board
Microsemi
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 9 656, USA
; Phone (USA): [phone], (ROW): (949) 1-
7100 Fax: (949) 756
The information contained in the document is PROPRIETARY AND CONFIDENTIAL information of
and cannot be copied published uploaded posted transmitted distributed or disclosed or
used without the express duly signed written consent of Microsemi If the recipient of this document has
entered into a disclosure agreement with Microsemi then th
e terms of such Agreement will also apply .
This document and the information contained herein may not be modified by any person other than
authorized personnel of Microsemi. No license under any patent copyright trade secret or other
roperty right is granted to or conferred upon you by disclosure or delivery of the
information either expressly by implication inducement estoppels or otherwise. Any license under
such intellectual property rights must be approved by Microsemi in wri
ting signed by an officer of
Microsemi reserves the right to change the configuration functionality and performance of its products
at anytime without any notice. This product has been subject to limited testing and should not be used
support or other mission
-
critical equipment or applications. Microsemi assumes
no liability whatsoever and Microsemi disclaims any express or implied warranty relating to sale and/or
use of Microsemi products including liability or warr
anties relating to fitness for a particular purpose
merchantability or infringement of any patent copyright or other intellectual property right. The product
is subject to other terms and conditions which can be located on the web at
http://www.microsemi.com/legal/tnc.asp
Para Affected/Page
Description
Initial revision
Fix layout figures
[e-mail]
www.microsemi.com
Catalog Number:
PD70222EVB Evaluation Board
– U ser Gui d e
Page 15
7100 Fax: (949) 756
-0308
The information contained in the document is PROPRIETARY AND CONFIDENTIAL information of
and cannot be copied published uploaded posted transmitted distributed or disclosed or
used without the express duly signed written consent of Microsemi If the recipient of this document has
e terms of such Agreement will also apply .
This document and the information contained herein may not be modified by any person other than
authorized personnel of Microsemi. No license under any patent copyright trade secret or other
roperty right is granted to or conferred upon you by disclosure or delivery of the
information either expressly by implication inducement estoppels or otherwise. Any license under
ting signed by an officer of
Microsemi reserves the right to change the configuration functionality and performance of its products
at anytime without any notice. This product has been subject to limited testing and should not be used
critical equipment or applications. Microsemi assumes
no liability whatsoever and Microsemi disclaims any express or implied warranty relating to sale and/or
anties relating to fitness for a particular purpose
merchantability or infringement of any patent copyright or other intellectual property right. The product
is subject to other terms and conditions which can be located on the web at
Description
Catalog Number:
PD70 EVB_UG