MID WEST PRODUCTS 1K-1956 User manual

©2019 Mid West Products, Inc. -1- Form No. K1-1728
BALER –MODEL 1K-1956 (26”)/1K-1957 (31”)
Owner’s Manual
SAVE THIS MANUAL
You will need this Manual for the Safety Instructions, Assembly Instructions and Parts List. Put it in a
safe, dry place for future reference.
Additional Information/Link to PDF Copy of this Manual:
WARNING
•Read instructions and Warnings before set up and use.
•Check to insure product is not damaged prior to use. If product is damaged, do not use.
•Only use product as intended. Do not attempt to jump or stand on product.
•Not for use by unsupervised children.
1K-1956
1K-1957 ➔

©2019 Mid West Products, Inc. -2- Form No. K1-1728
INSTALLATION
Unroll Baler and place Baler Rod in Hooks (14) so Baler will hang inside Hamper. Now, allow the Baler
to hang down the back of the Hamper and across the bottom of the Hamper. Then the front Baler Rod
should be laid at the front edge of the Hamper bottom panel.
OPERATION
The Baler allows you to almost double your Hamper capacity. Allow the Baler to hang down and back
across the bottom of the Hamper toward the front of the Sweeper. Sweep until the Baler is full. Now,
lift the bottom Baler Rod up to the rear of the Hamper and hook onto Hook Bolt with the top Baler Rod.
Sweep again until Hamper is full. Empty both Hamper and Baler. Replace Baler as indicated in
Installation and continue sweeping.
Baler –Model 1K-1956(26”)/ 1K-1957 (31”)
GUARANTEE
The merchandise you have purchased from us has been carefully engineered and manufactured under
Mid West Products rigid quality standards and should give you satisfactory, dependable operation.
However, like all mechanical merchandise, it may occasionally require adjustment or maintenance.
Should you need technical assistance, please contact MID WEST PRODUCTS.
INSTRUCTIONS FOR ORDERING PARTS
(Minimum Parts Order Charge $20.00)
1. Address all parts orders or correspondence regarding customer service to one of the following:
Parts Dept.
Phone:
[phone]
Mid West Products, Inc.
P.O. Box 301
E-mail:
[email protected]
Phillipsburg, OH 45354
Website:
www.Mid-West-Products-Inc.com
2. Write your name and address plainly (print or type).
3. Explain where and how to ship.
4. Give model number of unit.
5. Give part number from parts list, as well as a description, including color, of the part and the quantity
you need.
6. Inspect all shipments you receive. If any parts are damaged or missing, file a claim with the carrier
before accepting.
7. If you are returning parts, be sure to include WITH THE SHIPMENT a list of the parts with your
name and address.
8. All orders for repair and replacement parts will be shipped when paid with Master Card, Visa, or
personal check/money order. Prices subject to change without notice.