Middle Atlantic Products HDR Series User manual

Instruction Sheet
------ hdr series -----
Low-Profile Wall Mount
Horizontal Equipment Ca inet
c(V^us
LISTED
THANK YOU
Thank you for purchasing the HDR Series.
Please read these instructions thoroughly before installing/asse bling this product.
PRODUCT FEATURES
- Innovative, low-profile parallel-to-the-wall design
- Reversible hinged door includes lock and padlockable latch for added security
- Ideal for ounting patch panels, switches, hubs and routers
Middle Atlantic Products
I-00036 Rev E

IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Clean only with dry cloth.
• Only use attach ents/accessories specified by the anufacturer.
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING ALERTS YOU TO A SITUATION
THAT COULD RESULT IN SERIOUS PERSONAL INJURY
OR DEATH.
CAUTION: A CAUTION ALERTS YOU TO A SITUATION
THAT MAY RESULT IN MINOR PERSONAL INJURY OR
DAMAGE TO THE PRODUCT AND / OR PROPERTY.
NOTE: A NOTE IS USED TO HIGHLIGHT PROCEDURES
PERTAINING TO THE INSTALLATION, OPERATION OR
MAINTENANCE OF THE PRODUCT.
WARNING! Failure to read, understand and follow the following infor ation can result in serious personal injury, da age to the
equip ent or voiding of the warranty.
CAUTION: All installation and asse bly steps ust be perfor ed by qualified personnel.
CAUTION: Ensure that the wall/floor has a structural load capacity that will support the weight of the cabinet fully loaded with
equip ent.
CAUTION: So e parts of the enclosure syste ay not be effectively bonded to the Protective Earth Ter inal (PET). If these parts
need to be bonded to the PET it should be done in accordance with Article 250 of the National Electrical Code.
CAUTION: Power cord(s), for fans or other accessories, need to be secured to ensure that they are routed away fro pinch points
and oving parts.
CAUTION: Do not atte pt to unload or ove the enclosures alone. Make sure to have sufficient a ount of personnel and
equip ent to safely ove this product.
CAUTION: The following parts are not effectively bonded to the protective earth ter inal: Rackrails, lace bars, Lever Lock™,
shelving, baffles, blank panels, and cable anage ent equip ent. If any part needs to be bonded to the protective earth ter inal
it shall be done in accordance with Article 250 of the National Electrical Code.
CAUTION: TO REDUCE THE RISK OF PERSONAL INJURY AND CONFORM TO THE UL LISTING THESE
MOUNTING INSTRUCTIONS MUST BE FOLLOWED AND PROPER WEIGHT CAPACITIES MUST BE OBSERVED.
| CAUTION: Maxi u weight capacity is 150 lbs~

INSTA ATION
1) Mount the HDR to the wall utilizing all six ounting
points using custo er supplied hardware.
(FIGURE A)
2) To reverse the door orientation (if required), re ove
the door and lock/latch hardware as shown.
(FIGURE B)
3) Reinstall the door and hardware on the opposite side.
(FIGURE B)
HINGE STAYS ON DOOR
4) To reverse electrical box side (if required), re ove as shown and install on the opposite side.
(FIGURE C)
FIGURE C
Page 2

GROUNDING AND BONDING
Protective Earth Ter inals (PET) are located in backpan of the wall rack. These ter inals are arked with the sy bol Q
Wall rack parts, center section and door, contain or are provided with bonding points for connection to the backpan / PET.
Protective earth and bonding connections shall be in accordance with Article 250 of the National Electric Code.
OPTIONAL PROTECTIVE EARTH TERMINAL KIT: #PET-K-HDR
PARTS IST
Door bonding wire [12 Gauge Wire
(10-32 ring ter inal to 10-32 ring ter inal)]
Flange Nut 1/4-20
Locking Nut 10-32
QTY
(2)
(1)
(2)
Page 3

GROUNDING AND BONDING
NOTE: The ain protective earth ground needs to be the first ter inal placed on the PET and this
ter inal needs to be secured on its own with a nut.
1) Attach door bonding wire to backpan bonding stud using nut (included). (FIGURE D)
2) Attach opposite end of door bonding wire to door using thread for ing screw (included).
(FIGURE D)
BACKPAN
10-32 (2 UPPER AND 2 LOWER)
FIGURE D
(1 UPPER AND 1 LOWER)
Page 4

EQUIPMENT ACCESS
UPPER BAY PANEL CONNECTION ACCESS
Lift and rotate as shown. (FIGURE E)
A) B) \ l i f t
TOP
ROTATE
C)
TOP TOP
IN-USE POSITION FIGURE E
PUNCH DOWN & SERVICE
POSITION
LOWER BAY EQUIPMENT
CONNECTION ACCESS
Loosen the wing nuts on both sides
of the ounting rail and swing the
botto of the co ponent(s) forward
for easier access to the connection
points. (FIGURE F)
TOP LOOSEN
WING NUT
FIGURE F
SWING
OUT
BOTTOM
IN-USE POSITION SERVICE POSITION
OPTIONAL HDR-FAN INSTALLATION (SOLD SEPARATELY)
A) Re ove preinstalled fan guard bolts. (FIGURE G)
B) Re ove the solid plate covering the fan opening.
(FIGURE G)
C) Install fan and ensure that power cord is positioned as shown.
(FIGURE G)
D) Place the agnetic vent blocker over the lower door vent.
(FIGURE G)
NUTS
GUARD
NOTE: If used, fan housing ust be bonded in
accordance with Article 250 of NEC Page 5
HDR-FAN
POWER CORD
WIRE PROVISION
HDR-FAN
FAN
HOUSING
"K — -HDR-FAN
GUARD
I'^^S C R E W S
FIGURE G

WARRANTY
Middle Atlantic Products (the "Co pany") warrants the HDR Series Low-Profile Wall Mount Cabinet
to be free fro defects in aterial or work anship under nor al use and conditions for the lifeti e of
the product.
The Co pany's entire liability to the purchaser, and the purchaser's (or any other party's) sole and
exclusive re edy, under this warranty shall be li ited, at the Co pany's option, to either (a) return of
and refund of the price paid for, or (b) repair or replace ent at the Co pany's factory of the products
purchased, or any part or parts thereof, which the Co pany has deter ined to be defective after
inspection thereof at the Co pany's factory.
This warranty does not cover da age due to acts of God, accident, isuse, abuse or negligence by
parties other than the Co pany, or any odification or alteration of the products. In addition, this
warranty does not cover da age due to i proper handling, asse bly, installation or aintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE
PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY)
HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS
PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax [phone]
International Voice [phone] - Fax [phone]
iddleatlantic.co - info@ iddleatlantic.co
Middle Atlantic Canada
Voice 613-836-2501 - Fax [phone]
iddleatlantic.ca - custo erservicecanada@ iddleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.