Midland TEAMS M-15 User manual

TEAMS M-15
Smart Hearing Protection for Crews
USER MANUAL
Dynamic Mesh
Communication
Bluetooth®Works with
Two-Way radios

MIDLAND TEAMS M-15 1
Table of Contents
Introduction ......................................................................................................................................................................2
Before using the device ...................................................................................................................................................2
Important user information .............................................................................................................................................2
Technical Data................................................................................................................................................................... 2
Warnings............................................................................................................................................................................3
PPE safety statement ......................................................................................................................................................3
PPE Statement EU........................................................................................................................................................... 3
Statements Notices ..........................................................................................................................................................3
Federal Communications Commission (FCC) Statement.............................................................................................3
Industry Canada (IC) FVIN: V1.0.0 ..............................................................................................................................4
Getting Started .................................................................................................................................................................5
Getting to Know Your TEAMS M-15 Headset................................................................................................................5
Charging the TEAMS M-15 Headset ..............................................................................................................................6
Wearing Instructions.........................................................................................................................................................6
Switching Your Unit ON/OFF ........................................................................................................................................6
Using Your TEAMS M-15 Headset .................................................................................................................................. 7
Pairing Your Unit To Bluetooth Devices .......................................................................................................................... 7
Operation ..........................................................................................................................................................................8
Basic Audio Functions ......................................................................................................................................................8
Making and Receiving Phone Calls .................................................................................................................................8
Streaming Music...............................................................................................................................................................9
Listening to FM Radio......................................................................................................................................................9
Level Dependent/ Listen Through ...................................................................................................................................9
Self-hearing Sidetone.......................................................................................................................................................9
Emergency Call............................................................................................................................................................... 10
Working with 2-way Radio ............................................................................................................................................. 10
2-way Radio Audio Mixing and Sharing........................................................................................................................ 10
Voice Commands ............................................................................................................................................................ 10
Talking with Others .........................................................................................................................................................12
How Does DMC Work?...................................................................................................................................................12
Intercom Operation.........................................................................................................................................................12
Troubleshooting............................................................................................................................................................... 14
Soft Reset........................................................................................................................................................................ 14
Reset to Factory Settings............................................................................................................................................... 14
Personalizing Your Device............................................................................................................................................... 14
Appendix A. TEAMS M-15 Headset LEDIndications ................................................................................................. 16
Glossary ............................................................................................................................................................................17

2 MIDLAND TEAMS M-15
Introduction
Thank you for choosing the TEAMS M-15 Headset solution.
The TEAMS M-15 Headset is a smart, high-performance communication headset designed for use by professional
teams. TEAMS M-15 Headset redefines the boundaries of what is possible with short-range, critical voice-commu-
nications by wrapping together a unique combination of Bluetooth and Dynamic Mesh Communication (DMC®)
intercom technologies.
Bringing in years of field experience, the new TEAMS M-15 Headset delivers an autonomous group-communication
performance like no other solution on the market today.
Designed for professional, safety, and industrial markets, TEAMS M-15 Headset connects two to fifteen team mem-
bers on the go. Always-on communication coupled with natural voice operation, connectivity to 2-way radios, built-in
FM radio, smartphone music streaming, and hear-through capabilities provide a unique blend of top-class commu-
nication oerings.
The TEAMS M-15 Headset is equipped with two tactical level dependent microphones that enable situation aware-
ness, meaning that the microphones allow some of the ambient noise through, while reducing other ambient noise to
a specific, regulation-allowed level if it gets too loud. At the same time, the system amplifies low ambient noise making
sure you do not need to remove your headset to hear important sounds, such as warning signals.
Operating without the need for any infrastructure, the TEAMS M-15 Headset maintains multi-party intercom con-
nectivity between free-moving team members in virtually any environment.
The TEAMS M-15 Headset comes with the standard headband version or the helmet mount.
This User Manual describes how to use the TEAMS M-15 Headset, that in turn enables you to experience all the
capabilities of the MIDLAND TEAMS module embedded in this headset.
Important
Please read the user manual and follow the safety instructions included in the packaging prior to working with the
TEAMS M-15 Headset.
Before using the device
Millions of employees across the world are exposed to excessive levels of noise at their workplace. Because of this,
many suer work-related hearing loss, tinnitus, and other related medical conditions which may have a permanent,
negative eect on their quality of life.
To ensure that items of hearing protection are fit-for-purpose, and in line with the requirements of the Control of
Noise at Work Regulations 2005, ear protection products for sale in Europe must meet the EN352 series of Europe-
an standards. The USA/Canada require ANSI S3. 19-1974, and Australia & New Zealand require AS/NZS1270:2002.
When is hearing protection needed?
In Europe, according to the Control of Noise at Work Regulations 2005, the exposure level at which employers need
to provide hearing protection is a daily or weekly personal noise exposure of 85 dB (decibels). Those who work in noise
levels between 80 dB (lower action level) and 85 dB must be provided with suitable hearing protection on request.
Where noise levels reach or exceed 85 dB (upper action level), suitable hearing protection must be supplied and worn.
The exposure limit is 87 dB; this figure considers any reduction in exposure provided by hearing protection. Workers
must not be exposed to noise levels exceeding 87 dB whether they are wearing hearing protection or not.
The TEAMS M-15 Headset has been designed to comply with this certification to protect your hearing.
Important user information
Technical Data
Frequency: 2400-24835 MHz
Max Output Power: 0,04875 W

MIDLAND TEAMS M-15 3
Headband Version
• Material of headband: Steel, textile, and polyurethane
• Material of ear cushion: PVC and polyurethane
• Material of cups: ABS
Warnings
General
All headsets with hearing protection provide limited noise protection. It is your responsibility to select the correct de-
vice, with the appropriate noise reduction, for your work environment. Improper selection of the device, or improper
use and maintenance, may lead to serious hearing loss.
Limitation of Liability
In no event shall Midland be liable for any incidental, special, indirect, punitive, exemplary, or consequential damages,
whether resulting from the use, misuse, or inability to use this device, or from defects in the device, or for any damages
whatsoever resulting from the use of the device.
PPE safety statement
PPE Statement EU
Headband - Tested according to EN352-1:2020
Attenuation data – please see the enclosed instruction insert
SNR=32 dB H=32 dB M=31 dB L=25 dB
Size Range: Small/Medium/Large
Headband Force: Small = 10.1N / Medium = 11.9N / Large = 11.4N
Statements Notices
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could
void the user’s authority to operate the equipment.
15.105 (b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

4 MIDLAND TEAMS M-15
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this tran-
smitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC/IC
multi-transmitter product procedures. Instructions concerning human exposure to radio frequency electromagnetic
fields - to comply with FCC Section 1.310 for human exposure to radio frequency electromagnetic fields, a distance
of at least 2 cm. between the equipment and all persons should be maintained during the operation of the equipment.
Industry Canada (IC) FVIN: V1.0.0
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
IC RF Radiation Exposure Statement:
This equipment complies with the RSS-102 exemption from routine RF exposure evaluation for use in an uncontrolled
environment.
European CE Notice
Your Midland product (the “Product”) is in conformity with the following essential requirements of Council Directive
2014/53/EU: Articles 3.1a, 3.1.b and 3.2. The Product is manufactured in accordance with Annex II of the above
directive.
For the complete EU Declaration of Conformity please refer to www.midlandeurope.com at the Certifications
section.
• Operating temperature: The Product is designed to work in temperatures between -20° and 55° C (-4° and 131°
F).
• Charging temperature: Battery charging temperature limits: 0° - 40°C (32°-104°F).
• AC/DC Adapters: When charging from a wall outlet, make sure that the plug-in AC/DC adapter meets the
following criteria:
• Input: 100-240 V, 50/60 Hz, 0.2 A maximum. Output: 5 V DC, 1 A maximum.
• Equipment must be supplied by an external, specific limited power source, classified as PS1 according to IEC
62368-1.
• OEM integrator can use CE DOC of the PRO1 module as part of its end product declaration, as long as the
PRO-1 is the only Radio unit in the end product.
Bluetooth
The Product is compliant with, and adopts, the Bluetooth® Specification 4.2 and has successfully passed all intero-
perability tests that are specified in the Bluetooth® specification. However, interoperability between the device and
other Bluetooth®-enabled products is not guaranteed.
Copyright
The contents of the User Manual, including all text, illustrations, and drawings are the exclusive intellectual property of
Midland. (the “Company”) and are protected by copyright laws. They are not in the public domain. Any partial or total
reproduction, translation and or dissemination, without the prior written authorization by the Company are strictly
prohibited. Any rights not expressly granted herein are reserved.

MIDLAND TEAMS M-15 5
Getting Started
Getting to Know Your TEAMS M-15 Headset
The buttons on your TEAMS M-15 Headset control the following functionalities:
MFB (Multi-Function or MF button):
Power On/O
Main Voice Menu
Music Control
FM Control
Bluetooth Pairing
INT (Intercom):
Intercom Grouping
Voice Menu
Bridge
Private Call
Emergency Call
Ambient Noise Control
PTT (Push-to-Talk)
Mute
Volume knob (up/down)
The connectors on your TEAMS M-15 Headset control the following functionalities:
USB-C Charging:
Charge your device
PTT Connector (Intercom):
Connection to 2-Way Radio using dedicated cable
LED 1
LED 2
MFB Button
Intercom Button
Mute Button
Knob Volume Control
Adjustable Voice
Microphone
Level Dependent
Microphones
USB-C Charging
PTT Connector
PTT
Button

6 MIDLAND TEAMS M-15
Charging the TEAMS M-15 Headset
Make sure that your TEAMS M-15 Headset battery is charged for at least 3 hours before initial use.
To charge the unit:
Using the USB-C cable, connect your computer or wall charger to the USB port on your TEAMS M-15 HEADSET.
• Charging with the wall charger is faster than via a computer USB port.
• Charging your unit switches it o automatically. To use your unit while it is being charged, switch it back
on.
• Charging is possible only if using Li-Ion batteries.
While charging, the LED indicates the charging status as follows:
• Red LED on — charging
• Green LED on — charging complete
TIP: You can check the battery charge at any time by saying “Hey Midland, battery status.”
Wearing Instructions
Wearing Instructions for TEAMS M-15 Headset Headband Type
To place the headset in the appropriate manner, make sure that you:
• Position the cups over your ears in a way that they fully enclose the ears
• Seal the cushions tightly against your head
• Adjust the height of the cups by sliding them up or down
Note: The headband should be straight on top of your head.
To fit the helmet with the headset on your head:
Tighten the headset so that they press on your ears. Press until you hear a distinct click
Switching Your Unit ON/OFF
To switch your TEAMS M-15 Headset on:
Press both the Intercom and the Multi-Function (MF) buttons for 1 second.
The speaker plays an ascending tone, and a voice message greets you. The LED confirms your TEAMS M-15 HE-
ADSET is on:
• Normal and low battery - LED flashes blue three times, then green.
• Charging - LED flashes red and purple three times.

MIDLAND TEAMS M-15 7
To switch your TEAMS M-15 Headset o:
Press both the Intercom and MF buttons for 1 second. The LED flashes red three times, confirming that your unit is
switching o. The speaker plays a descending tone and a voice message, “Goodbye.”
Using Your TEAMS M-15 Headset
You can operate the various features of your TEAMS M-15 Headset in the following ways:
• Press a button, or a combination of buttons, on the unit. The TEAMS M-15 Headset has an intuitive voice menu.
Just listen to the commands and choose the right one.
• Use automatic voice recognition by saying a command (for example, “Hey Midland, Radio On”).
• Use the Mobile App MIDLAND TEAMS on your mobile device (once it is paired with the unit).
You can also configure your unit by connecting it to a computer with the supplied USB cable and running the Midland
Configuration Tool.
Pairing Your Unit To Bluetooth Devices
Your TEAMS M-15 Headset has two Bluetooth channels for connection to Bluetooth devices such as mobile phones
and 2-way radio devices.
To connect your unit to a Bluetooth device, you must first pair the two. Once paired, they automatically recognize
each other whenever they are within range.
To pair the TEAMS M-15 Headset to a mobile phone:
1. Enable Bluetooth on your mobile phone.
2. While the TEAMS M-15 Headset is in standby mode, press the MF button for 5 seconds. The LED flashes red
and blue.
3. On your mobile phone, search for Bluetooth devices.
4. Once your TEAMS M-15 Headset appears in the list of available devices, select it. If prompted for a PIN or
Passkey, enter 0000 (four zeros).
5. Your phone will confirm that pairing has succeeded and the LED flashes purple for 2 seconds.
To pair the TEAMS M-15 HEADSET with a 2-way radio Bluetooth device:
1. Enable Bluetooth on the 2-way radio device.
2. While the TEAMS M-15 Headset is in standby mode, press the MF button for 5 seconds. The LED flashes red
and blue.
3. Tap the MF button once. The LED flashes red and green.
4. On the device you are pairing, search for Bluetooth devices.
5. Once your TEAMS M-15 Headset appears in the list of available devices, select it. If prompted for a PIN or
Passkey, enter 0000 (four zeros).
The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
If pairing is not completed within 2 minutes, the unit automatically returns to standby.
Not all Bluetooth mobile phones broadcast Bluetooth Stereo music (A2DP) even if the phone has an MP3
player function. Consult your mobile phone’s user manual for more information.
Not all Bluetooth 2-way radio devices allow connection to Bluetooth audio devices. Consult your 2-way radio
user manual for more information.
To cancel the pairing process:
Press the MF button for 2 seconds. The LED stops flashing red and blue/green.

8 MIDLAND TEAMS M-15
Operation
The TEAMS M-15 Headset makes it easy for you to receive phone calls and listen to music in a convenient and safe
manner.
Basic Audio Functions
The basic audio functions are the same whether you are listening to music, speaking on the intercom, or having a
phone conversation.
To turn the volume up:
Turn the Volume knob to the right (clockwise).
A tone is played on the speaker until you reach the maximum volume, as indicated by the maximum volume tone. The
tone in the high volume levels is dierent than the low volume ones to indicate that you are using high volume. Be sure
to always protect your hearing.
To turn the volume down:
Turn the Volume knob to the left (counterclockwise).
A tone is played on the speaker until you reach the minimum volume, as indicated by the minimum volume tone.
Mute Microphone
To mute the microphone completely, but keep speaker volume (to keep hearing communication):
Press and hold the Mute button
To unmute the microphone:
Release the Mute button
Mute Audio
To mute the microphone completely and lower the speaker volume to the minimal level:
Using voice command – “Hey Midland Mute Audio”
To unmute the microphone and raise the speaker volume to its previous level:
• Using voice command – “Hey Midland unmute Audio”
• Or just tap any button
Making and Receiving Phone Calls
You can use your mobile phone to make and receive phone calls while paired to your TEAMS M-15 Headset.
You can call hands-free using your mobile phone’s voice dial option, the Midland speed dial, or redial last call options.
To make a phone call:
• To dial using your mobile phone’s voice dial option, say “Hey Siri” (if you are using an iOS device) or “OK Goo-
gle” (if you are using an Android device), then make your call as per the instructions for your mobile device.
• To redial the last number called on your mobile device, tap the MF button, wait until you hear “Redial number”
and tap again, or say “Hey Midland, redial number.”
• To dial your preset speed dial number, tap the MF button, wait until you hear “Speed dial” and tap again, or say
“Hey Midland, speed dial.”
To answer a call:
Tap the MF button or say “Answer.”
To reject a call:
Press the MF button for 2 seconds.
To ignore a call:
Say “Ignore.”
To end a call:
Tap the MF button.