Miele DGC 6800 User manual

Quick Start Guide
Built-in coffee machine
This Quick start guide does not replace the Operating and installation instructions. It
is essential to read the Operating and installation instructions to familiarise yourself
with how to use the coffee machine before using it for the first time. Please pay
particular attention to the Warning and Safety instructions.
en - GB M.-Nr. 09 856 991
TIPS FOR USE SETTINGS CLEANING AND CARE / DESCALING
Cleaning and care Descaling Tips for use Settings
Changing settings
ĺSelect "Settings"in the main menu
ĺSelect the menu option you want and
change the setting as required.
ĺTouch "OK" to save the setting.
Tip: Touch to return to the previous
menu.
Option Available settings Notes
Language Deutsch, English and other languages
Country
Tip: If you select the wrong language by mistake, you can find the "Language" option by following the
flag symbol
Time Display (On / Off / Night dimming)
Clock type (Analogue / Digital)
Clock format (12 h / 24 h)
Set
Your choice of display will affect the energy consumption of your coffee machine. A message about
this will appear in the display.
Date Year / Month / Day
Timer Timer 1 (Switch on at, Switch off at, Switch
off after)
Timer 2 (Switch on at, Switch off at)
For "Switch on at" and "Switch off at", the timer must be activated and at least one day of the week
must be allocated.
Eco mode On / Off
Lighting Brightness
(Machine switched on or switched off)
Switch off after
Start screen Main menu
Drinks menu
Profiles
MyMiele
Info Number of drinks
No. of uses until descaling / degreasing the brew unit.
System lock On / Off When the system lock is activated, the "Switch on at" option for the timer cannot be selected.
Water hardness Soft, Medium, Hard, Very hard
Display brightness Set
Volume Buzzer tones
Keypad tones
Showroom programme Demo mode (On / Off) Only for demonstration purposes in showrooms or exhibitions. Do not activate this setting for domestic
use!
Plate warmer Automatic / On / Off
Spout adjustment On / Off The height of the central spout cannot be adjusted manually.
Factory default Settings
MyMiele
Please note that the following settings will not be reset: Language, Time, Number of drinks dispensed,
User profiles
Plumbed water supply On / Off (Only applies to CVA 6805)
Changing the portion size or
drink parameters
The changed portion size or drink
parameter is always stored in the current
profile.
The name of the current profile is shown in
the top left of the display.
Start in the drinks menu.
ĺPlace the desired cup under the central
spout.
ĺTouch "Process" and then "Change drink".
ĺSwipe the screen until the drink you
want appears, then touch it to select it.
You can now "Change the portion size" or
programme "Drink parameters".
Changing the portion sizes
ĺTouch "Change the portion size".
The desired drink will be prepared and
"Save" will appear in the display.
ĺTouch "Save" when the cup has been
filled to the level you want.
If you want to change portion sizes for
Cappuccino, Latte macchiato or Caffè
latte, the ingredients will be shown in the
display.
ĺTouch the ingredients you want to set
the portion size for.
The ingredients selected will have a tick 
beside them.
ĺTouch "OK".
Touch "Save" when the amount you want
of the particular ingredient has been
dispensed.
ĺSave the portion size required for the
selected ingredients.
The programmed mix of ingredients and
portion sizes will now be dispensed every
time that particular drink is selected.
Tip: You can cancel portion size
programming as long as "Stop" is showing
in the display.
Setting the drink parameters
ĺTouch "Drink parameters"
The following parameters can be set:
– Amount of coffee
– Brew temperature
– Pre-brewing
ĺTouch "OK" when you have set the
parameters to your requirements.
Resetting drinks
To reset the portion sizes and the
parameters for all drinks back to their
factory default setting:
ĺTouch "Process" in the Drinks menu and
then "Reset drinks".
"Reset all drinks to default?" will appear in
the display.
ĺTouch "Yes".
Profiles
You can set up individual user profiles and
save individual portion sizes for all drinks
for each profile.
The name of the current profile is shown in
the top left of the display.
Accessing a profile
ĺTouch "Profiles"in the main menu or
touch "Profiles" in the bottom right of the
Drinks menu.
Creating a profile
ĺTouch "Create profile".
The keyboard will open in the display.
ĺEnter the name you want and touch
"OK".
If you have already created a profile, the
following options are available to you:
– Select profile
– Change name
– Delete profile
– Change profile
(The coffee machine changes "Manually",
"After each use" or "When switched on").
Processing drinks for a profile
You can create your own drinks for each
profile and set the portion size and drink
parameters individually.
You can change the names of drinks in a
profile.
ĺSelect the profile you want.
Creating a drink
ĺTouch "Create drink" and select the
required drink from the standard drinks.
ĺChange the drinks parameters as
required. Save the amount you want of
the individual ingredients.
After dispensing, the keyboard will open in
the display.
ĺEnter a name for the new drink and
touch "Save".
If you have already created a drink, the
following options are available to you:
– Change drink
– Delete drink
You can save a maximum of 9 drinks in a
profile.
MyMiele
You can display drinks you make
frequently, drinks from profiles and
maintenance programmes in the MyMiele
screen.
Opening the MyMielemenu
ĺTouch "MyMiele"in the main menu.
You can now configure "MyMiele" and add
entries ("Add entry").
To add entries
You can select options listed in the
following categories:
– Drinks
– Profiles
– Maintenance
ĺTouch "Add entry".
If you have already added some entries,
you can carry out the following under
"Process":
– sort or
– delete entries.
Cleaning the milk pipework
The milk pipework must be cleaned with
the cleaning agent. Cleaning takes approx.
7 minutes.
You need one sachet of the Miele cleaning
agent for milk pipework.
The cleaning process cannot be
cancelled once it has started. The
process has to be carried through to the
end.
ĺTouch "Maintenance"in the main
menu and then "Clean the milk pipework".
The process will start.
ĺFollow the instructions in the display.
ĺFill the water container with lukewarm
water up to the level marker and add
1 sachet of Miele milk pipework cleaning
agent to it. Replace the water container.
When "Rinse and refill the water container"
appears in the display:
ĺRemove the water container and rinse it
carefully with clean water.
Make sure that no cleaning agent is left
in the water container.
The cleaning process is finished when
"Process finished" appears in the display.
Degreasing the brew unit
After 200 portions have been dispensed,
"Degrease the brew unit" will appear in the
display. This message will not go out until
the brew unit has been degreased.
You need 1 Miele cleaning tablet to
degrease the brew unit. The process takes
approx. 10 minutes.
The cleaning process cannot be
cancelled once it has started. The
process has to be carried through to the
end.
ĺTouch "Maintenance"in the main
menu and then "Degrease the brew
unit".
The process will start.
ĺFollow the instructions in the display.
When "Place a cleaning tablet in the ground
coffee chute and close the chute" appears in
the display:
ĺRemove the coffee chute cover and
open the lid of the coffee chute. Place a
cleaning tablet into the coffee chute.
ĺFollow the further instructions given in
the display.
The brew unit has been degreased when
"Process finished" appears in the display.
Descaling must be carried out and takes
approx. 20 minutes.
ĺYou will need 2descaling tablets.
The descaling process cannot be
cancelled once it has started. The
process has to be carried through to the
end.
ĺTouch "Maintenance"in the main
menu and then "Descale the appliance".
The descaling process will now start.
ĺFollow the instructions in the display.
ĺFill the water container with lukewarm
water up to the level marker and drop
2 descaling tablets in it. Replace the
water container.
Follow the instructions on the packet for
the mixing ratio carefully. It is important
that you fill the water container with the
correct amount of water (not less or
more), otherwise descaling will be cut
short and must then be repeated.
When "Rinse the water container and fill with
fresh tap water up to the  symbol" appears
in the display:
ĺRemove the water container and rinse it
carefully with clean water.
Make sure that no descaling agent is left
in the water container.
Descaling is finished when "Process
finished" appears in the display.

MAKING DRINKS GUIDE TO THE MACHINE / PREPARING FOR USE CONTROLS AND DISPLAY
Important information Controls and display Making drinks Cleaning and care
M.-Nr. 09 856 991 / 00
CVA 6800, CVA 6805 en – GB 2014
Please observe the detailed information on cleaning and care in the Operating
instructions. Clean the coffee machine every day after use.
Recommended
frequency
What do I have to clean / maintain?
Every day
(at the end of the day)
– the milk flask and lid
– the water container
– the waste container
– the drip tray and grille
Once a week
(or more often if needed)
– the central spout
– the central spout connector
– clean the milk valve with the cleaning brush
– the interior
– the small drip catcher inside the front of the
machine
– the brew unit
– the front of the machine
(especially straight after descaling)
Once a month – lubricate the cap on the central spout connector
When prompted – the milk pipework (using the cleaning agent for
milk pipework)
– the brew unit (degrease with the cleaning
tablets)
– descale the machine
As required – the coffee bean container
– remove any blockages from the milk pipework
The following items are not dishwasher safe:
– Central spout cover
– Milk flask lid
– Brew unit
– Coffee bean container and lid
– Service panel
All other removable components of the coffee machine are dishwasher safe.
Making espresso or coffee
ĺPlace a cup under the central spout.
ĺTouch the field for the drink you want:
Espresso
Coffee
Long coffee
The coffee or espresso will be dispensed
from the central spout into the cup.
Making two portions
To fill two cups at the same time:
ĺPlace a cup under each of the coffee
dispensers in the central spout.
ĺTouch the two cup symbol for the drink
you want.
Two portions of the desired drink will be
dispensed from the central spout.
Cancelling preparation
To cancel preparation:
ĺTouch "Cancel" or "Stop".
Drinks with milk
Notes on the milk flask
The milk will not keep cool in the milk
flask. It should therefore be kept in the
fridge if you are not going to be using
milk for a long period.
Cold milk (below 13 °C) gives the best
results for milk froth.
Lid
Sensor
Milk suction tube
Glass flask
ĺFill the flask with milk up to a maximum
of 2 cm below the rim.
ĺPush the milk flask fully back into the
coffee machine.
Making drinks with milk
ĺPlace a suitable container underneath
the central spout.
ĺTouch the drink you want:
Cappuccino
Latte macchiato
Caffè Latte
Hot milk
Milk froth
The selected drink will now be made.
Hot water
Please note that the water dispensed is
not hot enough for making tea.
ĺPlace a suitable container underneath
the hot water spout.
ĺSelect "Hot water".
Hot water is dispensed into the container
under the spout.
To cancel preparation:
ĺTouch "Cancel" or "Stop".
Before using for the first time
The coffee machine must be
correctly installed and connected
before it is used for the first time.
For more information please see the
Operating and installation instructions.
ĺBefore filling the coffee machine with
water and coffee beans, clean the
coffee machine and the milk flask
thoroughly.
ĺPlease see "Using for the first time"
in the Operating and installation
instructions.
Water hardness
Set the water hardness level on the coffee
machine to the water hardness level for
the local area to ensure that the machine
functions correctly and is not damaged.
See the Operating and installation
instructions for more information.
Filling the water container
Change the water every day to
prevent a build-up of bacteria.
ĺFill the water container with fresh,
cold tap water up to the "Max."
marker.
Filling the coffee bean
container
Warning. Only put roasted
espresso/coffee beans in the
container.
ĺOpen the front of the machine
and remove the coffee bean
container.
ĺFill the container with roasted
coffee beans.
Exterior view
On/Off sensor 
Touch display
"Back" sensor 
Handle
Hot water spout
Drip tray cover
Central spout with lighting and
automatic height adjustment
Milk flask and lid
Interior view
Ground coffee chute cover
Brew unit
Ground coffee chute
Slide control to select fineness of
ground coffee
Coffee bean container
Water container
Drip tray with grille
Waste container
Drip catcher
Central spout connector
Service panel
Guide to the machine Preparing for use
Sensor controls
On/Off sensorFor switching the coffee machine on and off
"Back" For returning to the previous menu,
cancelling unwanted actions
Touch display
Selecting or acessing
a menu
ĺTouch the field you want once with your finger.
Scrolling ĺSwipe the screen, i.e. place your finger on the Touch display and swipe it in the
direction you want.
ĺOr: Touch the or arrows to scroll from left to right.
Exiting a menu ĺTouch .
Entries made before this which have not been confirmed with "OK" will not be saved.
Entering numbers You can enter numbers by swiping and touching the roller or via the numerical keypad.
Roller:
ĺSwipe the roller up or down to select the number you want.
Numerical keypad:
ĺTouch in the bottom right of the input field.
The numerical keypad will appear:
ĺTouch the numbers you want.
When you enter a valid number, the "OK" field will light up green.
ĺUse the arrow to delete the last entered number.
ĺTouch "OK".
Entering letters Names are entered using a keyboard. It is best to select short names.
ĺTouch the letters or characters you want.
ĺTouch "Save".